Sears 270-3250 owner manual

Page 4

A WARNING: Foreign objects entering the auger or impeller can create clogs,

jams, projectiles, and other dangerous conditions.

Do not use in the path of wires, doormats, snow toys, or other foreign objects.

If the snow thrower intakes a foreign object, stop the engine, wait for the auger and impeller to stop rotating, and inspect the snow thrower for damage.

Turn off the engine and make sure that all moving parts have stopped before clearing any clogs or jams.

If the snow thrower makes any abnormal sounds or vibrations, stop the engine and inspect the snow thrower.

Use extreme caution when operating on or near dirt or gravel roads.

A WARNING: The auger and impeller rotate at fast speeds that can cause

damage or even amputation of body parts. Even if you do not see the auger or impeller rotating, they may start at any time if the engine is running.

Always turn off the engine before attempting to clear any clogs or jams.

Keep hands and feet away from rotating parts while the engine is running.

Do not wear loose fitting clothing that can become entangled in rotating parts.

A WARNING: This snow thrower is intended for use in conditions that are cold,

slippery, and otherwise naturally hazardous. Take precautions when operating

machinery in these conditions.

Always wear warm clothing and shoes intended for slippery surfaces.

Always operate in daylight with good visibility.

Never run with snow thrower and be alert to all surrounding people and traffic.

Do not operate the snow thrower on steep inclines.

Disengage the drive mechanism to neutral before starting the engine.

Always hold on to the handles while operating. Never leave the snow thrower while the engine is running.

A WARNING: This snow thrower produces heat when running. Temperatures near exhaust can exceed 150°F (65 ° C).

Do not touch hot surfaces. Pay attention to warning labels on the snow thrower denoting hot parts of the machine.

Even in cold conditions, allow the snow thrower to cool several minutes after use before touching engine or areas that heat during use.

CAUTION: Misuse of this snow thrower can damage it or shorten its life.

Use the snow thrower only for its intended purposes.

After starting the engine, allow it to adjust to outdoor temperatures before clearing snow.

Do not attempt to clear snow at too fast a rate, as this may overload the snow thrower.

Use only Yardworks :_:approved attachments or replacement parts with this snow thrower.

Never make adjustments to the snow thrower while the engine is running.

Image 4
Contents Snow Thrower Contents General Safety Procedures Page Page Package Contents Snow Thrower Components Engine Components Assembly Chute AssemblyAttaching Drive Speed Control Lever Chute Rotation Handle Cable attachment Preparing the Snow Thrower for USE 9399U Adjust Skid Shoes Operation Engine lever positionsUsing the Snow Thrower Chute Deflector Stopping the Snow Thrower MAINTENANCE/CARE Checking Tire Pressure Rephtcing the Oil Air Filter Maintenance Spark Plug Maintenance Adjusdng Drh,e and Auger Cables Replacing Shear Pins Troubleshooting ProblemCauseSolutionOose 100 Snow Thrower Parts List@ @ Engine Parts List 2ARBETRETOR Limited Warranty for Yardworks sSNOW Thrower