NOTE:For easiestassembly,we recommendnot attachingthelower bolt of eachhandle bracketuntil after assemblingthechuterotationhandle,augeranddrive handlecables, anddrive speedcontrollever.
Figure 2- Handle Assembly
Attaching Drive Speed Control Lever
To attach the drive speed control lever, slide it through the drive speed selection hole in the handle and attach it at the base of the snow thrower using two bolts and two nuts as shown in figure 3. Do not worry about the position of the handle in the drive speed selection hole. It will naturally be correct.
b
Figure 3- Drive Speed Control Lever Attachment
10