Sears 486.248463 owner manual Right Side View Left Side View

Page 7

If you have a 54" mower deck go directly to page 8. All other deck sizes use the following instructions.

•Remove the mower stop bracket and its two bolts and nuts from the R.H. side of the tractor frame as shown in fi gure 3.

•If the tractor has a muffl er guard at the front of the R.H. foot rest, remove the bottom bolt and nut, and the washer which is located between the guard and the tractor frame. See fi gure 3.

•Remove the two bolts from the bottom of both the R.H. and L.H. foot rests. See fi gure 3.

MUFFLER GUARD (ONLY MODELS WITH SIDE MUFFLER)

MOWER STOP

BRACKET

FIGURE 3

RIGHT SIDE VIEW

•Assemble the R.H. hanger bracket to the bottom hole where the mower stop bracket was removed and to the upper hole under the front of the foot rest. Fasten with two 3/8" x 1" hex bolts, 3/8" lock washers and 3/8" hex lock nuts. (On tractors with muffl er guards, slide the hanger bracket between the guard and the tractor frame.) See fi gure 4.

MUFFLER GUARD (ONLY MODELS WITH SIDE MUFFLER)

R.H. HANGER

BRACKET

•Assemble the L.H. hanger bracket to the left side of the tractor frame using two 3/8" x 1" hex bolts, two 3/8" lock washers and two 3/8" hex lock nuts as shown in fi gure 5.

L.H. HANGER

3/8" LOCK

BRACKET

WASHER

3/8" HEX LOCK NUT

3/8" x 1"

HEX BOLT

FIGURE 5

LEFT SIDE VIEW

•Assemble a frame bracket to the L.H. foot rest and sway bar bracket as shown in fi gure 6. Use two 3/8" x 1-1/4" hex bolts, three spacers and two 3/8" lock washers.

•Assemble a shoulder bolt to the inside of the L.H. frame bracket, securing it with a 3/8" lock washer and a 3/8" hex lock nut. See fi gure 6.

•Repeat with a frame bracket on the R.H. side of the tractor. Attach in the same manner but use four spacers (two per bolt).

•Proceed to page 9.

 

3/8" x 1-1/4"

3/8" HEX

 

HEX BOLT

LOCK NUT

L.H. FRAME

3/8" LOCK

3/8" LOCK

WASHER

BRACKET

WASHER

 

 

 

 

(2) SPACERS

(1) SPACER

 

 

3/8" x 1"

 

 

 

 

 

 

 

 

HEX BOLT

SHOULDER

SWAY BAR

3/8" HEX

3/8" LOCK

 

 

BOLT

 

BRACKET

LOCK NUT

WASHER

 

 

 

 

 

 

FIGURE 4

 

RIGHT SIDE VIEW

FIGURE 6

 

LEFT SIDE VIEW

 

 

 

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 46- 2 Stage Snow Thrower Tractor Attachment Warranty Table of ContentsAccessories and Attachments Safety Hardware Package Contents Carton Contents AssemblyItems Removed from Tractor Tools Required for AssemblyRemoval of Parts from Carton Tractor PreparationRight Side View Left Side View Left Side ViewMower Decks This page for tractors with 54 mower decks onlyEngine Pulleys Less than 6 in Diameter Attaching CLUTCH/IDLER AssemblyTractors with 54 Mower Decks only Assembly of Snow Thrower Right Front Corner View Mounting Snow Thrower to TractorViewed from Rear Assembling the BeltsDrive Belt Auger BeltAttaching Weight Tray to Tractor Accessories ChecklistKnow Your Snow Thrower HOW to Start Your Snow ThrowerHOW to Stop Your Snow Thrower OperationRaising and Lowering HOW to USE Your Snow ThrowerOperating Tips Controlling Snow DischargeMaintenance Replacing Auger Belt Service and AdjustmentsLift Release Cable Adjustment Skid SHOE, Leveling Shoe AdjustmentStorage Recommendations TroubleshootingRemoving the Spiral Auger Housing StorageParts QTY Description Part 554 51 59 58 30 2968 QTY Description Page Page Page Slope Guide Get it fixed, at your home or ours

486.248463 specifications

The Sears 486.248463 is a notable piece of computing history, representing the transitional phase in personal computing during the early 1990s. This device embodies the era when home and office computers began to embrace more advanced capabilities, driven largely by the evolution of processor technology and user requirements.

At the heart of the Sears 486.248463 is the Intel 486 processor, a significant leap from its predecessors. This microprocessor, which debuted in 1989, introduced a new level of performance, allowing users to handle more complex applications and multitasking functions seamlessly. The 486 architecture included an integrated floating-point unit, enhancing its ability to perform mathematical calculations, which was particularly beneficial for graphic design and engineering applications.

The Sears 486.248463 boasts a robust memory capacity, typically equipped with 4 to 16 MB of RAM, allowing for efficient operation of various software applications. This level of RAM was innovative for its time, providing users the ability to run multiple programs concurrently without experiencing slowdowns. Additionally, the system could support hard drives ranging from 120 MB to 1 GB, catering to the growing need for data storage as software applications became more sophisticated.

Another key feature of this model was its compatibility with DOS and early Windows operating systems. Users could enjoy a graphical user interface while leveraging the power of DOS-based applications, marking a significant shift in user experience. The Sears 486.248463 also included expansion slots, which allowed for upgrades and customization. Users could add additional memory or enhance graphics capabilities, reflecting the growing trend of personalized computing.

Graphics capabilities were enhanced through the inclusion of VGA support, delivering improved visual fidelity for both productivity applications and gaming. The resolution provided by VGA allowed for clearer images and more vibrant colors, making it suitable for a variety of multimedia tasks.

In terms of connectivity, the Sears 486.248463 featured standard serial and parallel ports, enabling connections to printers, modems, and other peripherals. This flexibility made it a suitable choice for both home users and small business environments.

Overall, the Sears 486.248463 stands as a representative of its time, showcasing key technologies and characteristics that laid the foundation for modern personal computing. Its combination of performance, expandability, and compatibility highlights how far technology has come and the significant milestones achieved throughout computing history.
Top Page Image Contents