Sears 486.248463 Tools Required for Assembly, Removal of Parts from Carton, Tractor Preparation

Page 6

TOOLS REQUIRED FOR ASSEMBLY

(2)7/16" Wrenches

(2)1/2" Wrenches

(2)9/16" Wrenches

(1)5/8" Wrench or Adjustable Wrench

(1)11/16" Wrench or Adjustable Wrench

(1)3/4" Wrench or Adjustable Wrench

(1)Knife

General Purpose Grease

REMOVAL OF PARTS FROM CARTON

Remove all parts and hardware packages from the carton. Lay out all parts and hardware and identify using the illustrations on pages 4 and 5.

CAUTION: Before starting to assemble the snow thrower, remove the spark plug wire(s), set the parking brake and remove the key from the tractor ignition.

TRACTOR PREPARATION

Before proceeding with these instructions, refer to the Service and Adjustments section of your tractor owner's manual for specifi c safety instructions.

Allow engine, muffl er and exhaust defl ector to cool before beginning.

Remove any front or rear attachment which is mount- ed to your tractor.

Remove the mower deck. Refer to your tractor owner's manual for removal instructions. Mark all loose parts and save for reassembly.

Remove the tractor hood and grill assembly. Refer to your tractor owner's manual for removal instructions.

ITEMS REMOVED FROM TRACTOR

Store all brackets and fasteners removed from the trac- tor during the assembly of the snow thrower, unless the instructions call for their use.

ASSEMBLING PARTS TO TRACTOR FRAME

Right hand (R.H.) and left hand (L.H.) are determined from the operators position while seated on the tractor.

Remove the hex bolt from the threaded hole at the top front corner of R.H. front suspension bracket.

Remove either a or b depending on tractor:

a.the hex bolt from the threaded hole at the top rear corner of R.H. front suspension bracket.

b.the nut from the carriage bolt at the top rear corner of the bracket, leaving the carriage bolt in the tractor frame. See fi gure 1.

Repeat for the L.H. front suspension bracket.

REMOVE NUT OR BOLT

REMOVE BOLT

FRONT SUSPENSION

BRACKET (R.H.)

FIGURE 1

RIGHT SIDE VIEW

Attach the front of the side plate to the threaded hole in the tractor frame using a 3/8" x 1" hex bolt and a 3/8" lock washer. Attach the rear of the R.H. side plate to the tractor using either a 3/8" x 1" hex bolt and lock washer or a 3/8" hex lock nut and lock washer. Repeat for the L.H. side. See fi gure 2.

NOTE: If the side plates are removed from the tractor frame, be sure to reassemble bolts and nuts back into the frame.

3/8" HEX

OR 3/8" X 1"

3/8" LOCK

LOCK NUT

HEX BOLT

WASHER

3/8" x 1"

HEX BOLT

SIDE PLATE (R.H.)

FIGURE 2

RIGHT SIDE VIEW

6

Image 6
Contents 46- 2 Stage Snow Thrower Tractor Attachment Table of Contents WarrantyAccessories and Attachments Safety Hardware Package Contents Assembly Carton ContentsTractor Preparation Tools Required for AssemblyRemoval of Parts from Carton Items Removed from TractorLeft Side View Right Side View Left Side ViewThis page for tractors with 54 mower decks only Mower DecksAttaching CLUTCH/IDLER Assembly Engine Pulleys Less than 6 in DiameterTractors with 54 Mower Decks only Assembly of Snow Thrower Mounting Snow Thrower to Tractor Right Front Corner ViewAuger Belt Assembling the BeltsDrive Belt Viewed from RearAttaching Weight Tray to Tractor Checklist AccessoriesOperation HOW to Start Your Snow ThrowerHOW to Stop Your Snow Thrower Know Your Snow ThrowerControlling Snow Discharge HOW to USE Your Snow ThrowerOperating Tips Raising and LoweringMaintenance Skid SHOE, Leveling Shoe Adjustment Service and AdjustmentsLift Release Cable Adjustment Replacing Auger BeltStorage TroubleshootingRemoving the Spiral Auger Housing Storage RecommendationsParts QTY Description Part 554 51 59 58 30 2968 QTY Description Page Page Page Slope Guide Get it fixed, at your home or ours

486.248463 specifications

The Sears 486.248463 is a notable piece of computing history, representing the transitional phase in personal computing during the early 1990s. This device embodies the era when home and office computers began to embrace more advanced capabilities, driven largely by the evolution of processor technology and user requirements.

At the heart of the Sears 486.248463 is the Intel 486 processor, a significant leap from its predecessors. This microprocessor, which debuted in 1989, introduced a new level of performance, allowing users to handle more complex applications and multitasking functions seamlessly. The 486 architecture included an integrated floating-point unit, enhancing its ability to perform mathematical calculations, which was particularly beneficial for graphic design and engineering applications.

The Sears 486.248463 boasts a robust memory capacity, typically equipped with 4 to 16 MB of RAM, allowing for efficient operation of various software applications. This level of RAM was innovative for its time, providing users the ability to run multiple programs concurrently without experiencing slowdowns. Additionally, the system could support hard drives ranging from 120 MB to 1 GB, catering to the growing need for data storage as software applications became more sophisticated.

Another key feature of this model was its compatibility with DOS and early Windows operating systems. Users could enjoy a graphical user interface while leveraging the power of DOS-based applications, marking a significant shift in user experience. The Sears 486.248463 also included expansion slots, which allowed for upgrades and customization. Users could add additional memory or enhance graphics capabilities, reflecting the growing trend of personalized computing.

Graphics capabilities were enhanced through the inclusion of VGA support, delivering improved visual fidelity for both productivity applications and gaming. The resolution provided by VGA allowed for clearer images and more vibrant colors, making it suitable for a variety of multimedia tasks.

In terms of connectivity, the Sears 486.248463 featured standard serial and parallel ports, enabling connections to printers, modems, and other peripherals. This flexibility made it a suitable choice for both home users and small business environments.

Overall, the Sears 486.248463 stands as a representative of its time, showcasing key technologies and characteristics that laid the foundation for modern personal computing. Its combination of performance, expandability, and compatibility highlights how far technology has come and the significant milestones achieved throughout computing history.