Maintenance, Storage, Purchase Terms | Stiga 8218-2218-70 specification

ENGLISH

6 MAINTENANCE

The electrical connection must be disconnected before carrying out maintenance work.

6.1BEFORE USE

•Every time the snow thrower is to be used, check that the electrical equipment is intact and free of faults. The snow thrower must not be used if there are any faults or if any- thing is missing.

•Check that the auger rotates easily.

•Check that all screw joints are tightened. Tighten if nec- essary.

•Apply silicon spray to the auger. This prevents icing.

•Check that the starting handle cannot be activated with- out the ignition lock being moved to the left.

6.2FAULT-TRACING

The faults described below can usually be rectified directly by the user. If there is any doubt, contact an authorised STI- GA agent.

The motor does not start:

•The electric cable is not connected or is defective.

•The fuse has blown. If a higher amp fuse needs to be in- stalled, contact an authorised electrician.

The motor hums, but does not start:

•Auger or discharge chute blocked.

•The capacitor is defective. Contact your STIGA agent. The motor stops suddenly:

•Loose plugs.

•The overload protection has been tripped. Wait for 10 minutes, then attempt to start again.

The snow thrower vibrates:

•Loose parts.

•Defective auger.

•The motor is loose.

The snow thrower does not clear any snow:

•Auger or discharge chute blocked. The drive belt is loose or defective.

7 STORAGE

When the snow thrower is to be stored for an extended peri- od, such as during that part of the year when snow clearance does not need to be carried out, the following measures must be taken.

1.Clean the whole snow thrower thoroughly.

2.Inspect the snow thrower for damage. Repair if neces- sary.

3.Touch up any paint damage.

4.Rust-proof unpainted metal surfaces.

5.Store the snow thrower in a clean, dry place.

8 PURCHASE TERMS

A full warranty is issued against manufacturing and material defects. The user must carefully follow the instructions given in the enclosed documentation.

The warranty does not cover damage due to:

-Neglect by users to acquaint themselves with accompanying documentation

-Carelessness

-Incorrect and non-permitted use or assembly

-The use of non-genuine spare parts

-The use of accessories not supplied or approved by Stiga Neither does the warranty cover:

-Wear parts such as drive belts, augers, wheels

-Normal wear

-Engines. These are covered by the engine manufacturer’s warranties, with separate terms and conditions.

The purchaser is covered by the national laws of each country. The rights to which the purchaser is entitled with the support of these laws are not restricted by this warranty.

8218-2218-70 specifications

The Stiga 8218-2218-70 is a remarkable leaf blower designed for efficiency and ease of use, catering to homeowners and professionals alike who seek to maintain pristine outdoor environments. One of the standout features of this model is its powerful engine, which delivers impressive airspeed, enabling users to clear leaves and debris swiftly and effectively. The blower operates at a commendable noise level, making it suitable for use in noise-sensitive areas, while also ensuring that users can work comfortably without the excessive roar characteristic of many other blowers.

One of the key technologies integrated into the Stiga 8218-2218-70 is its lightweight design. Weighing in at only a fraction more than competitive models, it offers enhanced maneuverability, reducing fatigue during extended use. The ergonomic handle is another impressive aspect of the design, providing a comfortable grip that helps users maintain control, especially when working for long periods.

This model utilizes a reliable 4-stroke engine, which not only promises lower emissions compared to traditional 2-stroke engines but also requires less frequent maintenance. The advanced air filtration system also contributes to the longevity and efficiency of the engine, ensuring optimal performance season after season. With an adjustable throttle, users can easily control the airspeed and output power, tailoring the blower's performance to meet the requirements of various tasks.

Equipped with a robust air funnel, the Stiga 8218-2218-70 maximizes air intake, resulting in improved airflow and power. The inclusion of an anti-vibration system further enhances user comfort, minimizing fatigue during operation and allowing for precision work in delicate garden areas or busy commercial sites.

In terms of storage and transport, the Stiga 8218-2218-70 is designed for convenience. Its compact size and lightweight form factor make it easy to maneuver in tight spaces and transport to different job locations. This model also features simple controls and straightforward assembly, making it accessible for beginners and seasoned gardeners alike.

Overall, the Stiga 8218-2218-70 leaf blower combines advanced engineering with practical features to provide a tool that stands out in the crowded market of outdoor power equipment. Its balance of power, efficiency, and user-friendly design positions it as a top choice for anyone looking to simplify yard work and maintain an immaculate outdoor space.