Chute Clean-Out Tool, Drive / Auger Lock

•Retighten the hex jam nut. See Figure 1.

•Repeat Auger Control Test to verify proper adjustment has been achieved.

•While standing in the operator’s position (behind the snow thrower), engage the auger control for a few seconds to clear any remaining snow and ice from the chute assembly.

Figure 1

Chute Clean-Out Tool

The chute clean-out tool is conveniently fastened to the rear of the auger housing with a mounting clip. Should snow and ice become lodged in the chute assembly during operation, proceed as follows to safely clean the chute assembly and chute opening:

•Release both the Auger Control and the Drive Control.

•Stop the engine by removing the ignition key.

•Remove the clean-out tool from the clip which secures it to the rear of the auger housing.

•Use the shovel-shaped end of the clean-out tool to dislodge and scoop any snow and ice which has formed in and near the chute assembly.

WARNING: Never use your hands to clean snow and ice from the chute assembly or auger housing

•Refasten the clean-out tool to the mounting clip on the rear of the auger housing, reinsert the ignition key and start the snow thrower’s engine.

Drive / Auger Lock

The drive/auger lock allows the user to operate the snow thrower with one hand, leaving the left hand free to operate the chute directional control.

•Engage both the Auger Control and the Drive Control at the same time.

•Release the Auger Control and it will remain engaged until the Drive Control is also released.

Operating Tips

NOTE: Allow the engine to warm up for a few minutes after starting. The engine will not develop full power until it reaches operating temperature.

WARNING: The muffler, engine and surrounding areas become hot and can cause a burn. Do not touch.

•Discharge snow downwind whenever possible.

•Slightly overlap each previous swath.

•Set the skid shoes 1/4” below the scraper bar for normal usage. The skid shoes may be adjusted upward for hard-packed snow. Adjust downward when using on gravel or crushed rock.

•Avoid possible starter freeze-up. Clean the snow thrower thoroughly after each use.

7524, 9528 specifications

The Troy-Bilt 9528 and 7524 are popular snow blowers engineered to tackle winter's toughest challenges. With robust features and advanced technologies, these machines are designed for both residential and light commercial use, ensuring efficient snow removal for homeowners and businesses alike.

One of the defining characteristics of these models is their powerful engines. The 9528 is equipped with a 277cc engine, while the 7524 features a 208cc engine. Both engines provide the necessary power to handle heavy snowfall and deliver optimal performance even in the harshest winter conditions. The electric start capability on these models adds convenience, allowing users to start the machines with just the push of a button.

The build quality of the Troy-Bilt 9528 and 7524 is impressive, featuring a durable steel construction that enhances their longevity and reliability. Their rugged auger systems, designed for maximum snow intake, work in tandem with a strong impeller to efficiently throw snow far away from the path, reducing the need for multiple passes.

User-friendly controls are another highlight of these snow blowers. The models come with an easy-to-use dashboard that allows operators to adjust speed and chute direction with minimal effort. The power steering feature on the 9528 facilitates maneuverability, enabling users to navigate tight spots and challenging landscapes with ease.

In addition, both machines are equipped with large, durable tires that provide excellent traction on icy surfaces, ensuring stability during operation. The adjustable skid shoes allow users to customize the height of the cutting edge, preventing damage to driveways and walkways.

Furthermore, the Troy-Bilt models boast a two-stage snow throwing system, which is effective in clearing snow of varying depths. This makes them suitable for urban areas with heavy snow accumulation or rural locations where snow drifts can be common.

Overall, the Troy-Bilt 9528 and 7524 snow blowers combine power, durability, and innovative features to deliver outstanding snow removal performance. Whether facing a light dusting or a heavy winter storm, these machines offer reliability and effectiveness, making them an excellent choice for tackling snow with confidence.