Troy-Bilt 9528, 7524 manual Assembling Your Snow Thrower

Page 6

SECTION 2: ASSEMBLING YOUR SNOW THROWER

1

NOTE: References to right or left side of the snow thrower are determined from behind the unit in the operating position (standing directly behind the snow thrower, facing the handle panel).

IMPORTANT: Two replacement auger shear pins are included with this manual (or stowed in the plastic handle panel). Refer to Augers on page 19 for more information regarding shear pin replacement.

CAUTION: Prior to operating your snow thrower, refer to Auger Control Test on page 11. Read and follow all instructions carefully and perform all adjustments to verify your snow thrower is operating safely and properly.

1.Observe the lower rear area of the snow thrower to be sure both cables are aligned with roller guides before pivoting the handle upward.

2.Secure the upper shift rod to the lower shift rod by sliding the connector sleeve downward.

•Secure the handle by tightening the plastic wing

knob located on both the left and right sides of the handle. Remove and discard any rubber bands, if present. They are for packaging purposes only.

3.Apply a light lubricant (i.e. 3-in-1 oil) to the rim/lip of the chute base (and the underside of the chute assembly) and position the chute assembly over the base.

4.Close the flange keepers to secure the chute assembly to the chute base. The flange keepers will click into place when properly secure.

2

3

4

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Table of Contents Important Safe Operation Practices TrainingPreparation Maintenance & Storage OperationYour Responsibility Do not modify engineAssembling Your Snow Thrower Tire Pressure Know Your Snow Thrower Auger Control Clean-Out ToolChute Assembly Drive ControlStarting The Engine Operating Your Snow ThrowerBefore Starting Gas & Oil Fill-Up Electric StarterTo Engage Augers Stopping The EngineTo Engage Drive Auger Control TestChute Clean-Out Tool Drive / Auger LockOperating Tips Shift Rod Adjustment Tire PressureJoy-Stick Cable Adjustment Engine LubricationShave Plate and Skid Shoes Auger Belt Replacement Drive Belt Replacement Friction Wheel Removal OFF-SEASON Storage Trouble Shooting Guide Trouble Possible Causes Corrective ActionPage Parts List Style Q 1021 Style Q 12 15 634-04147 15 x 634-04151 734-04012 MANUFACTURER’S Limited Warranty for

7524, 9528 specifications

The Troy-Bilt 9528 and 7524 are popular snow blowers engineered to tackle winter's toughest challenges. With robust features and advanced technologies, these machines are designed for both residential and light commercial use, ensuring efficient snow removal for homeowners and businesses alike.

One of the defining characteristics of these models is their powerful engines. The 9528 is equipped with a 277cc engine, while the 7524 features a 208cc engine. Both engines provide the necessary power to handle heavy snowfall and deliver optimal performance even in the harshest winter conditions. The electric start capability on these models adds convenience, allowing users to start the machines with just the push of a button.

The build quality of the Troy-Bilt 9528 and 7524 is impressive, featuring a durable steel construction that enhances their longevity and reliability. Their rugged auger systems, designed for maximum snow intake, work in tandem with a strong impeller to efficiently throw snow far away from the path, reducing the need for multiple passes.

User-friendly controls are another highlight of these snow blowers. The models come with an easy-to-use dashboard that allows operators to adjust speed and chute direction with minimal effort. The power steering feature on the 9528 facilitates maneuverability, enabling users to navigate tight spots and challenging landscapes with ease.

In addition, both machines are equipped with large, durable tires that provide excellent traction on icy surfaces, ensuring stability during operation. The adjustable skid shoes allow users to customize the height of the cutting edge, preventing damage to driveways and walkways.

Furthermore, the Troy-Bilt models boast a two-stage snow throwing system, which is effective in clearing snow of varying depths. This makes them suitable for urban areas with heavy snow accumulation or rural locations where snow drifts can be common.

Overall, the Troy-Bilt 9528 and 7524 snow blowers combine power, durability, and innovative features to deliver outstanding snow removal performance. Whether facing a light dusting or a heavy winter storm, these machines offer reliability and effectiveness, making them an excellent choice for tackling snow with confidence.
Top Page Image Contents