Troy-Bilt 31AH9Q77766 warranty Skid Shoes, Chute Bracket Adjustment, Auger Control, Plate

Page 15

NOTE: If you placed plastic film under the gas cap earlier, remove it now.

Skid Shoes

The space between the shave plate and the ground can be adjusted. For close snow removal, place skid shoes in the low position. Use a middle or high position when area to be cleared is uneven.

1.Adjust skid shoes by loosening the six lock nuts and carriage bolts, and moving skid shoes to desired position. See Figure 5-4.

2.Make certain the entire bottom surface of skid shoes are against the ground to avoid uneven wear on the skid shoes.

3.Tighten nuts and bolts securely.

Chute Bracket Adjustment

If the spiral at the bottom of the chute directional control is not fully engaging with the chute assembly, the chute bracket can be adjusted. To do so:

1.Loosen the two nuts which secure the chute bracket and reposition it slightly. See Figure 5-5.

2.Retighten the nuts.

Auger Control

To adjust the auger control, refer to the section in this manual titled “Setting Up Your Snow Thrower”.

5

Friction

Making

Wheel

 

Adjustments

Drive

Axle Supp.

Plate

Brkt.

 

Opening

Figure 5-3

IMPORTANT: It is not recommended that you operate this snow thrower on gravel as loose gravel can be easily picked up and thrown by the auger causing personal injury or damage to the snow thrower.

 

If for some reason,

 

you have to operate

Figure 5-4

the snow thrower on

gravel, keep the skid

 

 

shoe in the highest

 

position for maximum

 

clearance between the

 

ground and the shave

 

plate.

Specifications are subject to change without notification or obligation. Images may not reflect your exact model and are for reference purposes only.

Figure 5-5

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Two-Stage Snow Thrower Storm 31AH9Q77766 Form no -00381C28/06 Table of Contents Finding and Recording Model NumberCustomer Support  2%!$ /0%2!4/2g3 -!.5!, Your Responsibility53% %842! #!54/ %. /0%2!4 %, 352&!#%3Your Responsibility Restrict the use TrainingPreparationYour Responsibility Maintenance & StorageOperation Do not modify engineSetting Up Your Snow Thrower Setting Up Your Snow Thrower Testing Auger Drive Control Final AdjustmentsSpecifications are Auger Drive Subject to change Control Testing Drive Control & Shift LeverReattach the spring to the actuator bracket Adjusting Drive and Auger ControlsAdjust the lock nut as follows Tire Pressure Pneumatic TiresKnow Your Snow Thrower Operating Your Snow Thrower$26% #/.42 Any conditions Gas & Oil Fill-UpStarting the Engine Electric StarterTo Engage Augers Chute Clean-Out ToolStopping the Engine To Engage DriveDrive Control Making AdjustmentsShift Rod Chute ControlPlate Chute Bracket AdjustmentSkid Shoes Auger ControlAugers Maintaining Your Snow ThrowerEngine LubricationAuger Belt Shave Plate Skid ShoesShave Plate Replacing BeltsPlug, and ground Against engine before Performing any type Maintenance on Your machineAlways stop engine Disconnect sparkDrive Belt Hex Shaft Changing Friction WheelSecure with the cupped washer and hex bolt removed earlier Hub Assembly Friction WheelShort-Term Storage Off-Season StoragePreparing Engine Preparing Snow ThrowerTrouble- shooting Problem Cause RemedyFor further details Contact an authorized Service center This section addresses minor service issuesStorm To order replacement Parts, call Or visit Parts List30 17 42 710-0458 Screw, Carr., 5/16-18 x Storm Sprocket, 32T 81 710-1245B Screw, Hx Cap 5/16-24 Page U.S.A Canada MANUFACTURER’S Limited Warranty for

31AH9Q77766 specifications

The Troy-Bilt 31AH9Q77766 is a robust and versatile riding lawn mower designed to meet the diverse needs of homeowners looking for efficient lawn care solutions. Known for its reliability and performance, this model blends advanced technology with user-friendly features, making it a popular choice for both novice and experienced gardeners.

One of the standout features of the Troy-Bilt 31AH9Q77766 is its powerful engine. Equipped with a reliable 382cc single-cylinder engine, it delivers robust performance to tackle various lawn terrains. This engine enhances the mower's cutting capabilities while ensuring fuel efficiency, making lawn maintenance both effective and economical.

The mower boasts a 30-inch cutting deck, which strikes the perfect balance between maneuverability and cutting width. This compact size allows it to navigate tight spaces, such as flower beds and fences, while still covering a substantial area in a single pass. The cutting deck is also equipped with a mulch kit that helps return nutrients back to the soil, promoting a healthier lawn.

User comfort and convenience are key aspects of the Troy-Bilt 31AH9Q77766. The operator's seat is designed for comfort, featuring a high-back design that provides ample support during long mowing sessions. Additionally, the mower is equipped with an easy-to-use dashboard that displays essential indicators, including fuel level and engine status, allowing users to monitor their mowing efficiently.

The Troy-Bilt 31AH9Q77766 also incorporates advanced technologies such as Troy-Bilt's proprietary IntelliPower system. This innovative feature automatically adjusts engine speed based on the cutting load to maintain optimal performance. As a result, users benefit from consistent cutting performance, even in thick grass.

Moreover, this riding mower comes with an automatic transmission that simplifies gear shifting, allowing users to focus on the task at hand instead of wrestling with complicated controls. The tight turning radius further enhances maneuverability, enabling users to make precise turns and navigate around obstacles seamlessly.

Maintenance is made easier with the Troy-Bilt 31AH9Q77766, thanks to its accessible design for routine oil changes and deck cleaning. The mower's build quality and durability ensure it withstands the rigors of regular use, making it a long-term investment for homeowners.

In conclusion, the Troy-Bilt 31AH9Q77766 stands out as a dependable riding mower equipped with a powerful engine, advanced technologies, and user-friendly features. Its combination of efficiency, comfort, and ease of maintenance makes it an ideal choice for homeowners looking to enhance their lawn care experience.
Top Page Image Contents