Transporting, Storage | Woods Equipment SS84-2, SS96-2, SS108-2

5. Clevis Pin

8. Discharge Chute

9. Adjustment Strap

Figure 8. Discharge Chute Position

■Keep bystanders away from equipment.

■Wear appropriate hearing protection.

5.Depth of cut can be controlled with the skid shoes or by tilting the blower forward or backward. Exces- sive forward or backward tilt may cause U-joint to flutter resulting in PTO shear bolt failure. Do not run the PTO shaft at more than a 15° angle.

6.Allow the snowblower to work its way through the snow rather than forcing it.

7.In deep snow it may be necessary to raise the snowblower for the first pass through and clean up the remainder with a second pass.

8.Do not feed snow through snowblower when rais- ing or lowering.

TRANSPORTING

A minimum 20% of tractor and equipment weight must be on the tractor front wheels when attachments are in transport position. Without this weight, front tractor wheels could raise up result- ing in loss of steering. The weight may be attained with front wheel weights, ballast in tires or front tractor weights. Weigh the tractor and equipment. Do not estimate.

Never allow riders on power unit or attachment.

Do not operate PTO during transport.

CAUTION

Always comply with all state and local lighting and marking requirements.

NOTICE

■Do not exceed 20 mph (32km/h). Reduce speed on rough roads and surfaces.

When transporting snowblower, review and follow this procedure:

■Be sure all bystanders are clear of machine.

■Be sure that machine is securely attached to tractor and all retainer pins are installed.

■Raise machine.

■Do not allow riders.

STORAGE

Block equipment securely for storage.

Keep children and bystanders away from stor- age area.

After season's use, machine should be thoroughly inspected and prepared for storage. Repair or replace any worn or damaged components to prevent any unnecessary down time at start of next season.

To insure a long, trouble free life, this procedure should be followed when preparing unit for storage.

1.Clear area of bystanders.

2.Thoroughly wash machine to remove all dirt, mud, debris or residue.

3.Check auger, fan and drivelines for damage or entangled material. Remove the entangled mate- rial. Repair or replace damaged parts.

4.Inspect all hydraulic hoses, fittings, lines and cou- plers. Tighten any loose fittings. Replace any hose that is cut, nicked or abraded or is separating from crimped end of fitting.

5.Change oil in gearbox.

6.Lubricate all grease fittings. Make sure that all grease cavities have been filled with grease to remove any water residue from washings.

7.Touch up all paint nicks and scratches to prevent rusting.

8.Move to storage area.

9.Select an area that is dry, level and free of debris.

10.Unhook from tractor.

11.Store machine in an area away from human activ- ity.

12.Do not allow children to play on or around stored machine.

MAN0884 (08/15/2011)	Operation 15

SS108-2, SS96-2, SS84-2 specifications

Woods Equipment is renowned for its commitment to producing high-quality agricultural machinery, and the SS series of rotary finish mowers is no exception. The SS96-2, SS108-2, and SS84-2 models reflect the brand's dedication to performance and efficiency, making them an optimal choice for maintaining lawns, parks, and golf courses.

The SS96-2 features a cutting width of 96 inches, providing an efficient mowing solution for larger properties. It incorporates a robust, heavy-duty construction that ensures durability and longevity. The design includes three cutting decks, which promote an even cut and help in managing a variety of grass types. With a reliable two-blade system on each deck, the mower delivers a clean, professional finish, while the adjustable mower heights allow operators to tailor the cut to their specific needs.

The SS108-2 takes things a step further with an impressive 108-inch cutting width, making it suitable for vast expanses of terrain. This model features advanced technologies such as the three-point hitch system, which simplifies connection to tractors and allows for easy maneuverability across uneven ground. Similar to the SS96-2, it utilizes three blades per deck, making quick work of tall grass and thick underbrush. Additionally, this model includes a shielded design to minimize debris pickup and promote operator safety.

For those looking for a more compact choice, the SS84-2 with an 84-inch width is ideal for smaller properties or tighter spaces. Despite its size, the SS84-2 does not compromise on power or performance. It features the same three-blade system and adjustable height settings, ensuring a quality cut. The compact size facilitates easier navigation through tight spots, making it a versatile addition to any landscaping toolkit.

Another key characteristic of these rotary finish mowers is their emphasis on operator comfort. Each model is designed with user-friendly controls and ergonomic features, making operation more enjoyable and less strenuous over long periods. Moreover, all three mowers have effective maneuverability, allowing operators to complete tasks efficiently and with precision.

In conclusion, the Woods Equipment SS96-2, SS108-2, and SS84-2 models stand out for their exceptional cutting capabilities, durable construction, and user-friendly designs. Whether for large estates or smaller lawns, Woods Equipment's SS series offers range, efficiency, and versatility to meet diverse mowing needs.