Dealer Check Lists, Delivery Check List

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(Dealer Responsibility)

Inspect the equipment thoroughly after assembly to ensure it is set up properly before delivering it to the customer.

The following check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.

___ Check that all safety decals are installed and in good condition. Replace if damaged.

___ Check that shields and guards are properly installed and in good condition. Replace if dam-

	aged.
___	Check all bolts to be sure they are tight.
___	Check that all cotter pins and safety pins are
	properly installed. Replace if damaged.
___	Check and grease all lubrication points as identi-
	fied in "Service, lubrication information".
___	Check the level of gearbox fluids before delivery.
	Service, if required, as specified in the "Service,
	lubrication information."

DELIVERY CHECK LIST

(Dealer Responsibility)

___ Show customer how to make adjustments and select proper PTO speed.

___ Instruct customer how to lubricate and explain importance of lubrication.

___ Point out the safety decals. Explain their meaning and the need to keep them in place and in good condition. Emphasize the increased safety haz- ards when instructions are not followed.

___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.

___ Show customer how to make sure driveline is properly installed and that spring-activated lock- ing pin or collar slides freely and is seated in groove on tractor PTO shaft.

___ Explain to customer the potential crushing haz- ards of going underneath raised equipment. Instruct customer that service work does not require going underneath unit and never to do so.

___ Point out the correct mounting and routing of hydraulic hoses. Explain that during operation, mounting, dismounting and storage, care must be taken to prevent hose damage from pulling, twist- ing and kinking.

___ Show customer the safe, proper procedures to be used when mounting, dismounting, and storing equipment.

___ For mounted units, add wheel weights, ballast in front tires, and/or front tractor weight to enhance front end stability. A minimum 20% of tractor and equipment gross weight must be on front tractor wheels. When adding weight to attain 20% of tractor and equipment weight on front tractor wheels, you must not exceed the ROPS weight certification. Weigh the tractor and equipment. Do not estimate!

___ Make customer aware of optional equipment available so that customer can make proper choices as required.

___ Point out all guards and shields. Explain their importance and the safety hazards that exist when not kept in place and in good condition.

24 Dealer Check Lists	MAN0884 (08/15/2011)

SS108-2, SS96-2, SS84-2 specifications

Woods Equipment is renowned for its commitment to producing high-quality agricultural machinery, and the SS series of rotary finish mowers is no exception. The SS96-2, SS108-2, and SS84-2 models reflect the brand's dedication to performance and efficiency, making them an optimal choice for maintaining lawns, parks, and golf courses.

The SS96-2 features a cutting width of 96 inches, providing an efficient mowing solution for larger properties. It incorporates a robust, heavy-duty construction that ensures durability and longevity. The design includes three cutting decks, which promote an even cut and help in managing a variety of grass types. With a reliable two-blade system on each deck, the mower delivers a clean, professional finish, while the adjustable mower heights allow operators to tailor the cut to their specific needs.

The SS108-2 takes things a step further with an impressive 108-inch cutting width, making it suitable for vast expanses of terrain. This model features advanced technologies such as the three-point hitch system, which simplifies connection to tractors and allows for easy maneuverability across uneven ground. Similar to the SS96-2, it utilizes three blades per deck, making quick work of tall grass and thick underbrush. Additionally, this model includes a shielded design to minimize debris pickup and promote operator safety.

For those looking for a more compact choice, the SS84-2 with an 84-inch width is ideal for smaller properties or tighter spaces. Despite its size, the SS84-2 does not compromise on power or performance. It features the same three-blade system and adjustable height settings, ensuring a quality cut. The compact size facilitates easier navigation through tight spots, making it a versatile addition to any landscaping toolkit.

Another key characteristic of these rotary finish mowers is their emphasis on operator comfort. Each model is designed with user-friendly controls and ergonomic features, making operation more enjoyable and less strenuous over long periods. Moreover, all three mowers have effective maneuverability, allowing operators to complete tasks efficiently and with precision.

In conclusion, the Woods Equipment SS96-2, SS108-2, and SS84-2 models stand out for their exceptional cutting capabilities, durable construction, and user-friendly designs. Whether for large estates or smaller lawns, Woods Equipment's SS series offers range, efficiency, and versatility to meet diverse mowing needs.