Check V-Belts, Check Friction Wheel

•Drive/Auger Control Lock: The cam on the ends of the control rods which interlock the drive and auger controls must be lubricated at least once a season or every 25 hours of operation using a multi-purpose automotive grease. The cam can be accessed beneath the handle panel.

Lubricate pivot points

Lubricate cams

Lubricate

shift rod &

shift arm

Lubricate axle

Lubricate drive mechanism

Figure 9

Check V-Belts

Follow instructions below to check the condition of the drive belts every 50 hours of operation.

1.Remove the plastic belt cover on the front of the engine by removing two self-tapping screws.

2.Visually inspect for frayed, cracked, or excessively worn out belts. Replace, if necessary, following instructions on page 14.

Check Friction Wheel

Follow instructions below to check the condition of the friction wheel rubber every 50 hours of operation.

1.Remove the self-tapping screws from the frame cover underneath the snow thrower. Refer to Figure 14.

2.Visually inspect the friction wheel rubber for excessive wear, cracks, or loose fit on the friction wheel drive hub.

3.Also engage the drive control and check if the friction wheel is making contact with drive plate. If it does not make contact, adjust the drive cable (refer to page17) and recheck the friction wheel.

4.Replace friction wheel rubber if necessary. Refer to instructions on page 16.

5.Re-attach frame cover to the snow thrower and put the equipment back to operating position.

Check Chute Cables

Once a season or every 25 hours of operation, whichever is earlier, check whether the chute cables have slackened. Adjust if necessary, following instructions on page 18.

Checking Oil Level

Before operating snow thrower, check the oil level by following steps below.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi- viscosity oils also result in higher oil consumption when used above 32oF. Check your snow thrower’s engine oil level more frequently to avoid possible engine damage from running low on oil.

1.With engine on level ground, oil must be to FULL mark on dipstick. See Figure 10 .

2.Stop engine and wait several minutes before checking oil level. Remove oil fill cap and dipstick.

3.Wipe dipstick clean, insert it into oil fill hole and tighten securely.

4.Remove dipstick and check. If oil is not up to the FULL mark on dipstick, add oil.

A	Dipstick	B
		Fill up if
	Read oil	needed
	level
8	L
8	L
o	U
z	F
.
D
D
A
	Tighten
	dipstick
C

Figure 10

5.Refer to the engine manual for details on grade and procedure to change engine oil.

5KL specifications

The Yard-Man 5KL is a standout lawn tractor designed for delivering exceptional performance in residential landscaping tasks. Built for efficiency and ease of use, the Yard-Man 5KL is ideal for homeowners with medium to large yards, offering top-notch features and cutting-edge technologies.

One of the defining characteristics of the Yard-Man 5KL is its powerful engine. Equipped with a robust 24 horsepower engine, the tractor provides ample power for a variety of mowing conditions. The engine is designed for reliability, ensuring that it runs smoothly and efficiently during prolonged use. Its advanced air filtration system helps to prolong the life of the engine by keeping it clean and reducing wear and tear.

The Yard-Man 5KL features a 54-inch cutting deck, allowing users to cover a large area in a shorter amount of time. This wide cutting deck is complemented by adjustable cutting height settings, giving users the flexibility to achieve their desired lawn appearance. With simple controls, users can easily switch between different cutting heights, making it versatile for different grass types and conditions.

Comfort is another important aspect of the Yard-Man 5KL. It boasts a spacious, ergonomic seat that is designed to reduce fatigue during extended mowing sessions. The operator's controls are intuitively placed, making it easy to navigate the tractor with minimal distraction. The inclusion of a steering wheel with a tight turning radius enhances maneuverability, allowing users to navigate tight corners and landscaping features seamlessly.

Technology in the Yard-Man 5KL is also noteworthy. The tractor is equipped with automatic transmission, which enables smooth speed adjustments reflective of the mowing conditions without the need for constant shifting. This results in a more relaxed mowing experience. Additionally, the integrated LED headlights offer visibility during early morning or evening mowing sessions.

Durability is a hallmark of the Yard-Man 5KL, as it is constructed with high-quality materials designed for long-lasting performance. The reinforced chassis ensures stability, while rust-resistant components enhance the tractor's longevity. Maintenance is straightforward, with easy access to key components for routine service.

In summary, the Yard-Man 5KL is an exceptional lawn tractor that combines power, comfort, and advanced technology. With its large cutting deck, ergonomic design, and user-friendly features, it serves as a reliable tool for efficient lawn care. Whether tackling large grass areas or navigating tight spaces, the Yard-Man 5KL ensures that homeowners can achieve a well-maintained lawn with ease.