Yard-Man 5KL manual Important Safe Operations Practices, Training

Page 3

SECTION 1: IMPORTANT SAFE OPERATIONS PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol—heed its warning.

WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

Training

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their operation. Know how to stop the machine and disengage controls.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Thrown objects can cause serious personal injury. Plan your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like.

6.Keep bystanders, helpers, pets and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

7.Exercise caution to avoid slipping or falling, especially when operating in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/ impeller.

2.Always wear safety glasses or eye shields during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Do not operate without wearing adequate winter outer garments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

4.Use a grounded three-wire extension cord and receptacle for all units with electric start engines.

5.Adjust collector housing height to clear gravel or crushed rock surfaces.

6.Disengage all controls before starting the engine.

7.Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual.

8.Let engine and machine adjust to outdoor temperature before starting to clear snow.

9.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refueling.

f.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark or pilot light (e.g. furnace, water heater, space heater, clothes dryer etc.).

j.Allow unit to cool for 5 minutes before storing.

3

Image 3
Contents Operator’s Manual Table of Contents Training Important Safe Operations PracticesOperation Removing From Carton Setting UP Your Snow ThrowerBefore Assembly Setting up the Snow ThrowerFinal Adjustments Auger Control TestDrive Control & Shift Lever Skid Shoe Tire Pressure Pneumatic TiresFour-Way Chute Control Auger Control Operating Your Snow ThrowerKnow The Controls Drive Control/ Auger Control LockTo Start Engine Before Starting EngineRecoil Starter Before StoppingTo Engage Augers Chute Clean-Out ToolTo Stop The Snow Thrower To Engage DriveGeneral Recommendations Maintaining Your Snow ThrowerChecking Oil Level Check V-BeltsCheck Friction Wheel Check Chute CablesReplacing Belt Service & AdjustmentServicing Augers Shave Plate and Skid ShoesDrive Belt Auger BeltFriction Wheel Rubber Adjustments Drive ControlShift Rod Chute Control Preparing For StorageTroubleshooting Parts List for Model 5KL Model 5KL 4211 Handle Engagement Assembly RH Cable Z- Fitting 731-04894 41A 42C 43A 42A 42H 41B 42I 43D 42B 42J Ref No. Part No Description Safety & Decorative Labels Page MANUFACTURER’S Limited Warranty for

5KL specifications

The Yard-Man 5KL is a standout lawn tractor designed for delivering exceptional performance in residential landscaping tasks. Built for efficiency and ease of use, the Yard-Man 5KL is ideal for homeowners with medium to large yards, offering top-notch features and cutting-edge technologies.

One of the defining characteristics of the Yard-Man 5KL is its powerful engine. Equipped with a robust 24 horsepower engine, the tractor provides ample power for a variety of mowing conditions. The engine is designed for reliability, ensuring that it runs smoothly and efficiently during prolonged use. Its advanced air filtration system helps to prolong the life of the engine by keeping it clean and reducing wear and tear.

The Yard-Man 5KL features a 54-inch cutting deck, allowing users to cover a large area in a shorter amount of time. This wide cutting deck is complemented by adjustable cutting height settings, giving users the flexibility to achieve their desired lawn appearance. With simple controls, users can easily switch between different cutting heights, making it versatile for different grass types and conditions.

Comfort is another important aspect of the Yard-Man 5KL. It boasts a spacious, ergonomic seat that is designed to reduce fatigue during extended mowing sessions. The operator's controls are intuitively placed, making it easy to navigate the tractor with minimal distraction. The inclusion of a steering wheel with a tight turning radius enhances maneuverability, allowing users to navigate tight corners and landscaping features seamlessly.

Technology in the Yard-Man 5KL is also noteworthy. The tractor is equipped with automatic transmission, which enables smooth speed adjustments reflective of the mowing conditions without the need for constant shifting. This results in a more relaxed mowing experience. Additionally, the integrated LED headlights offer visibility during early morning or evening mowing sessions.

Durability is a hallmark of the Yard-Man 5KL, as it is constructed with high-quality materials designed for long-lasting performance. The reinforced chassis ensures stability, while rust-resistant components enhance the tractor's longevity. Maintenance is straightforward, with easy access to key components for routine service.

In summary, the Yard-Man 5KL is an exceptional lawn tractor that combines power, comfort, and advanced technology. With its large cutting deck, ergonomic design, and user-friendly features, it serves as a reliable tool for efficient lawn care. Whether tackling large grass areas or navigating tight spaces, the Yard-Man 5KL ensures that homeowners can achieve a well-maintained lawn with ease.