Yard-Man 5KL manual Auger Belt, Drive Belt

Page 15

A

Belt Cover

Self-Tapping

Self-Tapping Screw

Screw

B

Drive Belt

Engine

 

Pulley

Auger Belt

Figure 13

Auger Belt

1.Tip the snow thrower up and forward, so that it rests on the housing. Remove the self-tapping screws from the frame cover underneath the snow thrower and move the frame cover away. See Figure 14.

Frame Cover

Figure 14

2.Turn the shoulder screw a half a turn and slide it out of the mounting bracket. See Figure 15.

3.Unhook spring to release tension on the auger belt. Remove old belt and replace with new belt, installing it on the pulley. See Figure 15.

 

Auger

 

Pulley

Shoulder

 

Screw

 

Mounting Bracket

Spring

 

Figure 15

4.Wrap auger belt around the auger pulley. See Figure 15.

5.Re-insert shoulder screw into the mounting bracket and tighten to secure.

6.Wrap auger belt behind the idler. Reattach the spring to the bolt where it was earlier secured.

7.Re-install frame cover and flip the snow thrower back to the operating position.

8.Wrap auger belt around the engine pulley.

9.Re-install belt cover with the self-tapping screws removed earlier.

Drive Belt

1.Push idler counter-clockwise and insert a Phillips head screwdriver in the hole on the idler as shown in Figure 16. This will release tension on drive belt.

Engine

Auger Belt

 

Pulley

 

Drive Belt

 

Idler

 

Figure 16

2.Pull drive belt out and away from the engine pulley to remove. See Figure 16.

3.Tip the snow thrower up and forward, so that it rests on the housing. Remove the self-tapping screws from frame cover underneath the snow thrower and move the frame cover away. Refer to Figure 14.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operator’s Manual Table of Contents Training Important Safe Operations PracticesOperation Removing From Carton Setting UP Your Snow ThrowerBefore Assembly Setting up the Snow ThrowerFinal Adjustments Auger Control TestDrive Control & Shift Lever Skid Shoe Tire Pressure Pneumatic TiresFour-Way Chute Control Auger Control Operating Your Snow ThrowerKnow The Controls Drive Control/ Auger Control LockTo Start Engine Before Starting EngineRecoil Starter Before StoppingTo Engage Augers Chute Clean-Out ToolTo Stop The Snow Thrower To Engage DriveGeneral Recommendations Maintaining Your Snow ThrowerChecking Oil Level Check V-BeltsCheck Friction Wheel Check Chute CablesReplacing Belt Service & AdjustmentServicing Augers Shave Plate and Skid ShoesDrive Belt Auger BeltFriction Wheel Rubber Adjustments Drive ControlShift Rod Chute Control Preparing For StorageTroubleshooting Parts List for Model 5KL Model 5KL 4211 Handle Engagement Assembly RH Cable Z- Fitting 731-04894 41A 42C 43A 42A 42H 41B 42I 43D 42B 42J Ref No. Part No Description Safety & Decorative Labels Page MANUFACTURER’S Limited Warranty for

5KL specifications

The Yard-Man 5KL is a standout lawn tractor designed for delivering exceptional performance in residential landscaping tasks. Built for efficiency and ease of use, the Yard-Man 5KL is ideal for homeowners with medium to large yards, offering top-notch features and cutting-edge technologies.

One of the defining characteristics of the Yard-Man 5KL is its powerful engine. Equipped with a robust 24 horsepower engine, the tractor provides ample power for a variety of mowing conditions. The engine is designed for reliability, ensuring that it runs smoothly and efficiently during prolonged use. Its advanced air filtration system helps to prolong the life of the engine by keeping it clean and reducing wear and tear.

The Yard-Man 5KL features a 54-inch cutting deck, allowing users to cover a large area in a shorter amount of time. This wide cutting deck is complemented by adjustable cutting height settings, giving users the flexibility to achieve their desired lawn appearance. With simple controls, users can easily switch between different cutting heights, making it versatile for different grass types and conditions.

Comfort is another important aspect of the Yard-Man 5KL. It boasts a spacious, ergonomic seat that is designed to reduce fatigue during extended mowing sessions. The operator's controls are intuitively placed, making it easy to navigate the tractor with minimal distraction. The inclusion of a steering wheel with a tight turning radius enhances maneuverability, allowing users to navigate tight corners and landscaping features seamlessly.

Technology in the Yard-Man 5KL is also noteworthy. The tractor is equipped with automatic transmission, which enables smooth speed adjustments reflective of the mowing conditions without the need for constant shifting. This results in a more relaxed mowing experience. Additionally, the integrated LED headlights offer visibility during early morning or evening mowing sessions.

Durability is a hallmark of the Yard-Man 5KL, as it is constructed with high-quality materials designed for long-lasting performance. The reinforced chassis ensures stability, while rust-resistant components enhance the tractor's longevity. Maintenance is straightforward, with easy access to key components for routine service.

In summary, the Yard-Man 5KL is an exceptional lawn tractor that combines power, comfort, and advanced technology. With its large cutting deck, ergonomic design, and user-friendly features, it serves as a reliable tool for efficient lawn care. Whether tackling large grass areas or navigating tight spaces, the Yard-Man 5KL ensures that homeowners can achieve a well-maintained lawn with ease.
Top Page Image Contents