Operation

1.Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly. Contact with rotating parts can amputate hands and feet.

2.The auger/impeller control is a safety device. Never bypass its operation. Doing so makes the machine unsafe and may cause personal injury.

3.The controls must operate easily in both directions and automatically return to the disengaged position when released.

4.Never operate with a missing or damaged chute assembly. Keep all safety devices in place and working.

5.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

6.Do not operate machine while under the influence of alcohol or drugs.

7.Muffler and engine become hot and can cause a burn. Do not touch.

8.Exercise extreme caution when operating on or crossing gravel surfaces. Stay alert for hidden hazards or traffic.

9.Exercise caution when changing direction and while operating on slopes.

10.Plan your snow-throwing pattern to avoid discharge towards windows, walls, cars etc. Thus, avoiding possible property damage or personal injury caused by a ricochet.

11.Never direct discharge at children, bystanders and pets or allow anyone in front of the machine.

12.Do not overload machine capacity by attempting to clear snow at too fast of a rate.

13.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk, never run.

14.Disengage power to the auger/impeller when transporting or not in use.

15.Never operate machine at high transport speeds on slippery surfaces. Look down and behind and use care when in reverse.

16.If the machine should start to vibrate abnormally, stop the engine, disconnect the spark plug wire and ground it against the engine. Inspect thoroughly for damage. Repair any damage before starting and operating.

17.Disengage all controls and stop engine before you leave the operating position (behind the handles). Wait until the auger/impeller comes to a complete stop before unclogging the chute assembly, making any adjustments, or inspections.

18.Never put your hand in the discharge or collector openings. Always use the clean-out tool provided to unclog the discharge opening. Do not unclog chute assembly while engine is running. Before

unclogging, shut off engine and remain behind handles until all moving parts have stopped completely.

19.Use only attachments and accessories approved by the manufacturer (e.g. wheel weights, tire chains, cabs etc.).

20.If situations occur which are not covered in this manual, use care and good judgment. Contact your dealer or telephone 1-800-800-7310for assistance and the name of your nearest servicing dealer.

Maintenance & Storage

1.Never tamper with safety devices. Check their proper operation regularly. Refer to the maintenance and adjustment sections of this manual.

2.Before cleaning, repairing, or inspecting machine disengage all controls and stop engine. Wait until the auger/impeller come to a complete stop.

Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

3.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage.

4.Do not change the engine governor setting or over- speed the engine. The governor controls the maximum safe operating speed of the engine.

5.Snow thrower shave plates and skid shoes are subject to wear and damage. For your safety protection, frequently check all components and replace with original equipment manufacturer’s (OEM) parts only. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

6.Check controls periodically to verify they engage and disengage properly and adjust, if necessary. Refer to the adjustment section in this operator’s manual for instructions.

7.Maintain/replace safety/instruction labels, as necessary.

8.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

9.Prior to storing, run machine a few minutes to clear snow from machine and prevent freeze up of auger/ impeller.

10.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer etc.

11.Always refer to the operator’s manual for proper instructions on off-season storage.

Your Responsibility

Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

5KL specifications

The Yard-Man 5KL is a standout lawn tractor designed for delivering exceptional performance in residential landscaping tasks. Built for efficiency and ease of use, the Yard-Man 5KL is ideal for homeowners with medium to large yards, offering top-notch features and cutting-edge technologies.

One of the defining characteristics of the Yard-Man 5KL is its powerful engine. Equipped with a robust 24 horsepower engine, the tractor provides ample power for a variety of mowing conditions. The engine is designed for reliability, ensuring that it runs smoothly and efficiently during prolonged use. Its advanced air filtration system helps to prolong the life of the engine by keeping it clean and reducing wear and tear.

The Yard-Man 5KL features a 54-inch cutting deck, allowing users to cover a large area in a shorter amount of time. This wide cutting deck is complemented by adjustable cutting height settings, giving users the flexibility to achieve their desired lawn appearance. With simple controls, users can easily switch between different cutting heights, making it versatile for different grass types and conditions.

Comfort is another important aspect of the Yard-Man 5KL. It boasts a spacious, ergonomic seat that is designed to reduce fatigue during extended mowing sessions. The operator's controls are intuitively placed, making it easy to navigate the tractor with minimal distraction. The inclusion of a steering wheel with a tight turning radius enhances maneuverability, allowing users to navigate tight corners and landscaping features seamlessly.

Technology in the Yard-Man 5KL is also noteworthy. The tractor is equipped with automatic transmission, which enables smooth speed adjustments reflective of the mowing conditions without the need for constant shifting. This results in a more relaxed mowing experience. Additionally, the integrated LED headlights offer visibility during early morning or evening mowing sessions.

Durability is a hallmark of the Yard-Man 5KL, as it is constructed with high-quality materials designed for long-lasting performance. The reinforced chassis ensures stability, while rust-resistant components enhance the tractor's longevity. Maintenance is straightforward, with easy access to key components for routine service.

In summary, the Yard-Man 5KL is an exceptional lawn tractor that combines power, comfort, and advanced technology. With its large cutting deck, ergonomic design, and user-friendly features, it serves as a reliable tool for efficient lawn care. Whether tackling large grass areas or navigating tight spaces, the Yard-Man 5KL ensures that homeowners can achieve a well-maintained lawn with ease.