Tascam CD-RW5000 owner manual Erasing material CD-RW only, Erasing a finalized disc

Page 20

4 - Recording operations

disc, the disc can be completely erased for further recording, however).

1With the disc to be finalized inserted into the CD-RW5000, press the FINALIZE key [11] or [35].

2Press the RECORD key [17] or [45] within two seconds of pressing the FINALIZE key.

The CD-RW5000 will display the approximate time it will take to finalize the disc, together with REMAIN TIME, as the finalization process takes place. This time may vary, depending on the com- plexity of the disc (the number of tracks) but will typically be around two minutes.

NOTE

While the finalization process is taking place, the CD-RW5000 will not respond to any con- trols or commands.

Do not turn off the power to the CD-RW5000 while the finalization process is taking place. This will corrupt the data on the disc and make it unplayable on any system.

4.7 Erasing material (CD-RW only)

If you use CD-RW discs, you can erase tracks (before finalization) and the whole disc (after the disc has been finalized). CD-R discs cannot be erased. If you make a mistake recording a CD-R disc, it is not recoverable.

After a CD-RW disc has been finalized, it is not pos- sible to erase individual tracks. The whole disc must be erased if the disc is to be used for further recording.

NOTE

Do not turn off the power to the CD-RW5000 while erasure processes are taking place. This will corrupt the data on the disc and make the disc unusable for further playback or recording.

4.7.1 Erasing a finalized disc

The whole contents (audio material and subcode) will all be erased. This allows you to use a single CD-RW disc many times as a pre-master disc for duplication.

1Make sure that a finalized CD-RW disc is inserted, and that the CD-RW5000 is stopped.

2Press the ERASE key [12]. The display will show ERASE DISC.

3To start the erasure process, press the RECORD key [17] or [45] within two sec- onds of pressing the ERASE key.

If you press the ERASE key by mistake, simply wait for more than two seconds without pressing any other keys. The ERASE DISC indication will dis- appear from the display.

While the erasure process is going on, the display will show ERASE and RECORD and the RECORD indicator will flash.

4.7.2Erasing a track on a non-finalized disc

Only the last track on the disc can be erased. For example, if you have recorded ten tracks on a disc, only the tenth track can be erased. To erase the eighth track, you must first erase the tenth and ninth tracks, so that the eighth track becomes the last track on the disc.

1Make sure that a non-finalized CD-RW disc is inserted, and the CD-RW5000 is stopped.

2Press the ERASE key [12]. The display will show ERASE TRACK.

3To start the erasure process, press the RECORD key [17] or [45] within two sec- onds of pressing the ERASE key.

If you press the ERASE key by mistake, simply wait for more than two seconds without pressing any other keys. The ERASE TRACK indication will disappear from the display.

While the erasure process is going on, the display will show ERASE and RECORD and the RECORD indicator will flash.

20 TASCAM CD-RW5000

Page 19 Page 21
Image 20
Page 19 Page 21
Contents CD-RW5000 Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Safety Information Table of Contents Introduction About CD-R and CD-RW discsEnvironmental considerations FinalizingUnpacking the CD-RW5000 Use of CD-R and CD-RW discs Parts of the CD-RW5000 Front panel Rear panel RC-RW5000 remote control unit Number keys Repeat keyPGM key Track Incr keyPlayback operations Display modesPlaying back a selected track Repeating playbackFast searching Recording operations General recording notesRecording from digital sources Disc typesRecording with synchronized start OpticalAutomatic track division Manual track divisionReference levels Analog recordingFinalizing discs Erasing a track on a non-finalized disc Erasing material CD-RW onlyErasing a finalized disc Messages, troubleshooting, etc TroubleshootingSelf-diagnostic program I/O specifications SpecificationsAudio specifications Dimensional drawing Physical specificationsIndex a R CD-RWIndex S U CD-RW5000

CD-RW5000 specifications

The Tascam CD-RW5000 is a professional-grade CD recorder and player, renowned for its robustness and versatility in music and audio production environments. Positioned as a reliable solution for both live performances and studio applications, the CD-RW5000 features a sleek design and an array of advanced technologies that cater to a variety of audio recording needs.

One of the primary features of the CD-RW5000 is its ability to record, play, and finalize CDs in both CD-R and CD-RW formats. This flexibility allows users to create audio CDs for distribution or for archival purposes. The device is equipped with high-quality A/D and D/A converters that ensure exceptional sound fidelity, capturing every nuance of the input signal and delivering a clear and detailed output.

The CD-RW5000 also boasts a range of connectivity options, including balanced analog XLR inputs and outputs, unbalanced RCA connectors, and digital inputs and outputs via both optical and coaxial connections. This makes it easy to integrate the unit into various audio setups, allowing users to connect microphones, mixers, and other audio equipment directly to the recorder.

Another standout feature is the built-in editing capabilities. The CD-RW5000 allows users to perform track segmentation, which means they can easily divide long recordings into individual tracks. Additionally, users can add Index points for easier navigation, making it a valuable tool for creating live recordings, interviews, and multi-track sessions.

The device’s ease of use is augmented by its straightforward user interface and bright LCD display, which provides clear information on track status and recording settings. The front panel includes dedicated buttons for functions like repeat, program, and shuffle, allowing for seamless operation during playback and recording sessions.

Tascam also incorporates a range of advanced features to enhance the user experience, such as pitch control and a fader start function, allowing for synchronized playback with compatible equipment. The inclusion of a remote control also adds an extra layer of convenience, making it easier to operate the device from a distance.

In summary, the Tascam CD-RW5000 stands out as a versatile and reliable CD recorder with a wealth of features designed to meet the demands of professionals in the audio industry. Its robust construction, exceptional sound quality, and ease of use make it a preferred choice for those looking to capture high-quality audio in various settings, whether on stage or in the studio.
Top Page Image Contents