Tascam owner manual Finalizing, Unpacking the CD-RW5000, Environmental considerations

Page 7

1.2 Finalizing

Although audio data may be written on a CD-R or CD-RW disc, an audio CD player will not be able to read the data (i.e. play back the audio) until a final table of contents (TOC) has been written at the start of the disc.

The process of writing this table of contents is known as “finalizing”. Once this has been done, no further data can be written to the disc. See 4.6, "Finalizing discs" for details.

In the case of a CD-RW disc which has been final- ized, the whole of the disc may be erased, and the disc re-used.

1.2.1 “Recordable” disc

In this manual, we use the term “recordable disc” to describe either a CD-R or a CD-RW disc which has not been finalized, i.e. further recording is still possible.

1.2.2 About this manual

In this manual, we use the following typeface to indi- cate a feature of the CD-RW5000 or its remote con- trol: the PLAY key. The numbers of the features are given in square brackets [13] and correspond to the numbers in 2, "Parts of the CD-RW5000". Where a feature is duplicated on the main unit and the remote control unit, both numbers are given.

Messages appearing on the display of the CD-RW5000 are given in the following typeface:

NO DISC.

1.3 Unpacking the CD-RW5000

When you unpack the CD-RW5000, you should find, in addition to this manual:

•the main unit itself

•the remote control unit with its attached cable

•a rack-mounting screw kit

1.3.1 Rack-mounting the CD-RW5000

Use the rack-mounting screw kit to mount the CD-RW5000 in a standard 19-inch rack, as shown below. Remove the feet of the unit before mounting it

1 - Introduction

in a rack, See 1.4, "Environmental considerations" below for ventilation, etc. parameters.

1.4 Environmental considerations

The CD-RW5000 should be operated in an environ- ment which provides adequate ventilation. We rec- ommend that a space of 1U is left above the unit when it is rack-mounted.

Avoid exposing the CD-RW5000 to excessive heat or extremes of temperature (between 5˚C and 35˚C— 41˚F and 95˚F), as well as avoiding excessively humid conditions. The CD-RW5000 is somewhat more sensitive to extremes of temperature than audio CD players.

The CD-RW5000 should be operated in a horizontal position (i.e. the front panel should be vertical). Avoid mounting the CD-RW5000 in a rack which is tilted more than 5˚ from the vertical.

The AC voltage supplied to the CD-RW5000 should match the voltage as printed on the rear panel of the unit. If you are in any doubt, consult an electrician.

NOTE

When transporting the CD-RW5000, always use the original packing materials. For this reason, we strongly recommend that you save all the packing materials that came with the CD-RW5000, in case you need to trans- port it in the future.

In addition, when transporting the CD-RW5000, you should tape the disc tray closed, using adhesive tape which will not spoil the finish of the unit.

TASCAM CD-RW5000 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CD-RW5000 Important for U.K. Customers Important Safety PrecautionsImportant Safety Instructions Safety Information Table of Contents About CD-R and CD-RW discs IntroductionUnpacking the CD-RW5000 FinalizingEnvironmental considerations Use of CD-R and CD-RW discs Parts of the CD-RW5000 Front panel Rear panel RC-RW5000 remote control unit Track Incr key Number keysRepeat key PGM keyRepeating playback Playback operationsDisplay modes Playing back a selected trackFast searching Disc types Recording operationsGeneral recording notes Recording from digital sourcesOptical Recording with synchronized startManual track division Automatic track divisionFinalizing discs Analog recordingReference levels Erasing a finalized disc Erasing material CD-RW onlyErasing a track on a non-finalized disc Troubleshooting Messages, troubleshooting, etcSelf-diagnostic program Audio specifications SpecificationsI/O specifications Physical specifications Dimensional drawingCD-RW Index a RIndex S U CD-RW5000

CD-RW5000 specifications

The Tascam CD-RW5000 is a professional-grade CD recorder and player, renowned for its robustness and versatility in music and audio production environments. Positioned as a reliable solution for both live performances and studio applications, the CD-RW5000 features a sleek design and an array of advanced technologies that cater to a variety of audio recording needs.

One of the primary features of the CD-RW5000 is its ability to record, play, and finalize CDs in both CD-R and CD-RW formats. This flexibility allows users to create audio CDs for distribution or for archival purposes. The device is equipped with high-quality A/D and D/A converters that ensure exceptional sound fidelity, capturing every nuance of the input signal and delivering a clear and detailed output.

The CD-RW5000 also boasts a range of connectivity options, including balanced analog XLR inputs and outputs, unbalanced RCA connectors, and digital inputs and outputs via both optical and coaxial connections. This makes it easy to integrate the unit into various audio setups, allowing users to connect microphones, mixers, and other audio equipment directly to the recorder.

Another standout feature is the built-in editing capabilities. The CD-RW5000 allows users to perform track segmentation, which means they can easily divide long recordings into individual tracks. Additionally, users can add Index points for easier navigation, making it a valuable tool for creating live recordings, interviews, and multi-track sessions.

The device’s ease of use is augmented by its straightforward user interface and bright LCD display, which provides clear information on track status and recording settings. The front panel includes dedicated buttons for functions like repeat, program, and shuffle, allowing for seamless operation during playback and recording sessions.

Tascam also incorporates a range of advanced features to enhance the user experience, such as pitch control and a fader start function, allowing for synchronized playback with compatible equipment. The inclusion of a remote control also adds an extra layer of convenience, making it easier to operate the device from a distance.

In summary, the Tascam CD-RW5000 stands out as a versatile and reliable CD recorder with a wealth of features designed to meet the demands of professionals in the audio industry. Its robust construction, exceptional sound quality, and ease of use make it a preferred choice for those looking to capture high-quality audio in various settings, whether on stage or in the studio.
Top Page Image Contents