Tascam CD-RW5000 owner manual Introduction, About CD-R and CD-RW discs

Page 6

1 - Introduction

The TASCAM CD-RW5000 allows you to make your own standard audio CDs, using cost-effective standard CD-R discs. CD-RW discs can also be used, allowing bad “takes” and tracks to be erased and re-recorded as well as allowing whole discs to be reused.

The CD-RW5000 permits tracks to be added one at a time, or together, until the disc is “finalized”, allow- ing it to be replayed on audio CD players.

NOTE

Some models of CD player may not be able to play certain discs produced on the CD-RW5000.

The CD-RW5000 provides professional-level

+4 dBu balanced inputs and outputs as well as unbal- anced inputs and outputs at –10 dBV. Trimmer potentiometers are provided on the balanced outputs to allow precise signal matching.

The CD-RW5000 also provides a comprehensive set of digital inputs: AES/EBU professional and SPDIF consumer formats are both supported. The SPDIF connectors are provided in both coaxial (RCA) and optical form, and coaxial and optical digital outputs are also provided in this format.

A sampling frequency converter is included in the CD-RW5000, so that material from sources which have not been recorded at the standard CD frequency of 44.1 kHz (i.e. 48 kHz and 32 kHz) can be recorded using digital transfer.

When recording from digital sources, the CD-RW5000 can read not only the audio data, but the track start data, etc., allowing automatic transfer of material from DAT, etc. without the need for man- ual intervention.

A wired remote control allows easy operation of the CD-RW5000 from anywhere in the project location.

NOTE—Important notice

This product is designed to help you record and reproduce sound works to which you own the copyright, or where you have obtained permission from the copyright owner or the rightful licensor. Unless you own the copy- right, or have obtained the appropriate per- mission from the copyright owner or the rightful licensor, your unauthorized recording,

reproduction or distribution thereof may result in severe civil and criminal penalties under copyright laws and international copyright treaties. If you are uncertain about your rights, contact your legal advisor. Under no circum- stances will TEAC Corporation be responsible for the consequences of any illegal copying performed using the CD-RW5000.

1.1 About CD-R and CD-RW discs

CD-R discs can be recorded once only. Once they have been used for recording, they cannot be erased or re-recorded. However, if space is available on the disc, additional material can be recorded. The pack- aging of CD-R discs will include the following logo:

It is also possible to use discs which are marked as “CD-R Digital Audio for Consumer”.

By contrast, the CD-RW disc can be used in much the same way as a CD-R disc, but the last track recorded can be erased before the disc has been “finalized”, and the space on the disc can be re- used for other recordings. The packaging of CD-RW discs will include the a logo similar to the following:

However, you should note that an audio CD created using a CD-RW disc may not play back satisfactorily on every audio CD player. It will, naturally, be play- able on the CD-RW5000. This is in no way a limita- tion of the CD-RW5000 itself, but of the difference between the different types of media and the methods used to read them.

CD-R discs created on the CD-RW5000, by contrast, may be played satisfactorily on the majority of audio CD players.

For details of disc brands that are known to work well with the CD-RW5000, contact your TASCAM dealer.

6 TASCAM CD-RW5000

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CD-RW5000 Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Safety Information Table of Contents Introduction About CD-R and CD-RW discsFinalizing Unpacking the CD-RW5000Environmental considerations Use of CD-R and CD-RW discs Parts of the CD-RW5000 Front panel Rear panel RC-RW5000 remote control unit PGM key Number keysRepeat key Track Incr keyPlaying back a selected track Playback operationsDisplay modes Repeating playbackFast searching Recording from digital sources Recording operationsGeneral recording notes Disc typesRecording with synchronized start OpticalAutomatic track division Manual track divisionAnalog recording Finalizing discsReference levels Erasing material CD-RW only Erasing a finalized discErasing a track on a non-finalized disc Messages, troubleshooting, etc TroubleshootingSelf-diagnostic program Specifications Audio specificationsI/O specifications Dimensional drawing Physical specificationsIndex a R CD-RWIndex S U CD-RW5000

CD-RW5000 specifications

The Tascam CD-RW5000 is a professional-grade CD recorder and player, renowned for its robustness and versatility in music and audio production environments. Positioned as a reliable solution for both live performances and studio applications, the CD-RW5000 features a sleek design and an array of advanced technologies that cater to a variety of audio recording needs.

One of the primary features of the CD-RW5000 is its ability to record, play, and finalize CDs in both CD-R and CD-RW formats. This flexibility allows users to create audio CDs for distribution or for archival purposes. The device is equipped with high-quality A/D and D/A converters that ensure exceptional sound fidelity, capturing every nuance of the input signal and delivering a clear and detailed output.

The CD-RW5000 also boasts a range of connectivity options, including balanced analog XLR inputs and outputs, unbalanced RCA connectors, and digital inputs and outputs via both optical and coaxial connections. This makes it easy to integrate the unit into various audio setups, allowing users to connect microphones, mixers, and other audio equipment directly to the recorder.

Another standout feature is the built-in editing capabilities. The CD-RW5000 allows users to perform track segmentation, which means they can easily divide long recordings into individual tracks. Additionally, users can add Index points for easier navigation, making it a valuable tool for creating live recordings, interviews, and multi-track sessions.

The device’s ease of use is augmented by its straightforward user interface and bright LCD display, which provides clear information on track status and recording settings. The front panel includes dedicated buttons for functions like repeat, program, and shuffle, allowing for seamless operation during playback and recording sessions.

Tascam also incorporates a range of advanced features to enhance the user experience, such as pitch control and a fader start function, allowing for synchronized playback with compatible equipment. The inclusion of a remote control also adds an extra layer of convenience, making it easier to operate the device from a distance.

In summary, the Tascam CD-RW5000 stands out as a versatile and reliable CD recorder with a wealth of features designed to meet the demands of professionals in the audio industry. Its robust construction, exceptional sound quality, and ease of use make it a preferred choice for those looking to capture high-quality audio in various settings, whether on stage or in the studio.
Top Page Image Contents