Craftsman 536.88521 operating instructions Fuel Safety, Deadly GAS, Safe Storage

Page 3

Use only attachments and accessories

approved by the manufacturer of the snow thrower (such as eectric starter kits, etc.).

Never operate the Snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

This snow thrower is for use on side-

walks, driveways, and other ground level surfaces. CAUTION: should be exercised

while using on steep sloping surfaces. DO NOT USE SNOW THROWER ON

SURFACES ABOVE GROUND LEVEL such as roofs of residences, garages, porches or other such structures or buildings.

Check all bolts at frequent intervals for proper tightness to be sure the snow thrower is in safe working condition.

Disengage clutch before starting the engine.

Let engine and snow thrower adjust to outdoor temperatures before starting to clear snow.

FUEL SAFETY

Handle fuel with care; it is highly flam- mable.

Use an approved container.

Check fuel supply before each use, allowing space for expansion as the heat of the engine and/or sun can cause fuel to expand.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors. Replace fuel

tank cap securely and wipe up spilled fuel.

Never remove the fuel tank cap or add fuel to a running or hot engine.

Never store fuel or snow thrower with fuel in the tank inside a building where fumes

may reach an open flame.

OPERATING SAFETY

Never allow children or young teenagers to operate the snow thrower. Keep them away while it is operating. Never allow adults to operate the snow thrower without proper instruction.

Do not operate this machine if you are taking drugs or other medication which can cause drowsiness or affect your ability to operate this machine.

Do not use this machine if you are mentally or physically unable to operate this machine safely.

Always wear safety glasses or eye shields during operation or while perform-

ing an adjustment or repair to protect

eyes from foreign objects that may be thrown from the snow thrower.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

Exercise extreme caution to avoid

or falling, especially when operating in reverse or backing up.

Do not clear snow across the face of slopes. Excercise caultion when changing direction on slopes..Do not attempt to clear steep slopes.

Never operate the snow thrower without proper guards, plates, or other safety protective devices in place.

Never operate the snow thrower near glass enclosures, automobiles, window wells, drop-offs, and the like without proper adjustment of the snow discharge angle. Keep children and pets away.

Never operate the snow thrower at high transport speeds on slippery surfaces. Look behind and use care when backing.

Never direct discharge at bystanders or allow anyone in front of the snow thrower.

Do not run the engine indoors, except when starting the engine and for trans- porting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous, containing CAR- BON MONOXIDE, an ODORLESS and

DEADLY GAS.

Take all possible precautions when leaving the snow thrower unattended. Disengage the auger/impeller, stop engine, and remove key.

Do not overload the machine capacity by

attempting to clear snow at too fast a rate.

SAFE STORAGE

Always refer to the owner'smanual instructions for important details if the snow thrower is to be stored for an extended period.

Disengage power to the auger/impeller when snow thrower is transported or not in use.

Never store the snow thrower with fuel in the fuel tank inside a building where ignition sources are present such as water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Image 3
Contents 761893 07/27/98 SEARS, Roebuck and CO., Hoffman Estates, IL 60179 U.S.ALimited TWO-YEAR Warranty on Craftsman Snow Thrower Engine exhaust from this productBefore USE Fuel Safety Deadly GASSafe Storage REPAIR/ADJUSTMENTSSAFETY To Assemble the Snow Thrower ChecklistAll assembly instructions have been Completed To Remove Snow Thrower from CartonChute Control Lower Handle Chute Deflector ChokeButtonPrimer Button Injects fuel directly into Fill GAS S. I Imperzal s.I. MetricTo USE Auger Propel Action Before Starting EngineCold Start Gasoline and OIL MixtureTo Stop Engine To Start Engine Electric StartTo Stop Engine Warm StartTo Start Engine Recoil Start Snow Throwing Tips Product SpecificationsDRY and Average Snow WET Packed SnowSpark Plug Customer Responsibilities ServiceLubrication Chart Lubrication AS Required RecordsTo Remove TOP Cover Carburetor AdjustmentTo Adjust the Chute Crank Assembly To Adjusttheaugercontrol CableTo Adjust Brake PAD To Remove Belt CoverScrews to be Boltsto beremoved from Top removedfrom To Replace the Drive Belt To Replace the AugerLeft F#ame Push the spark plug wire onto the spark plug Engine ServiceAdjust Engine Speed Other Snow Thrower StorageEngine Storage Carbu Drain Right side view EngineCause Adjust auger control cableTrouble CorrectionElectric Start Assembly Craftsman 21 5H.P. Snow ThrowerPart Name ENGINE/DRIVE Assembly Oraftsman 21 5H.P. Snow ThrowerPart Name Discharge Chute Assembly Frame AssemblyBelt Cover Assembly 51o 48152010 540Craftsman 21 -5H.P.SNOW Thrower Wheel Assembly Handle AssemblyPartname Part Name Craftsman 21 5H.P. Snow Thrower DecalsPart Name Partno Craftsman 2-CYCLE Engine Model Number Model Number Throttle Shutter REF. PART# Part NameStarter no Starter RewindRetainer Dust Washer Pinion DriverANTI-DRIFT Part

536.88521 specifications

The Craftsman 536.88521 is a versatile and powerful snow blower, designed to efficiently tackle heavy snowfall and keep pathways and driveways clear during winter months. With a strong focus on usability and performance, this model is favored by homeowners looking for reliable equipment that can handle various snow conditions.

One of the key features of the Craftsman 536.88521 is its 24-inch clearing width, which allows for quick and efficient snow removal. The robust auger design ensures that even heavy, wet snow can be efficiently thrown aside, making it suitable for various climates and snow types. The powerful 179cc engine provides ample power, allowing the snow blower to clear deep snow without straining.

Ergonomically designed, the Craftsman 536.88521 includes adjustable handles that promote comfortable operation while reducing fatigue during extended use. The easy-to-use controls are conveniently located, enabling users to adjust speed settings and the direction of the snow discharge without having to stop. The model features a 180-degree rotating chute that allows for precise snow placement, which is essential for maintaining clean walkways and driveways.

Technology is integral to the Craftsman 536.88521, featuring electric start capabilities for hassle-free ignition, eliminating the need for strenuous pull-starts in cold conditions. Additionally, the snow blower is equipped with a heavy-duty scraper blade that ensures efficient clearing down to the pavement, reducing the chances of ice buildup.

Another notable characteristic of the Craftsman 536.88521 is its durable construction. Built with high-quality materials, it is designed to withstand harsh winter conditions, ensuring longevity and reliability over time. The snow blower's large, enhanced tires provide excellent traction and maneuverability, allowing users to navigate through tough snow conditions with ease.

Overall, the Craftsman 536.88521 stands out as a dependable snow blower, combining power, efficiency, and user-friendly features. Its versatility makes it an excellent choice for homeowners looking to maintain clear and safe outdoor areas during winter storms. With the right balance of technology and practicality, it promises an effective solution for winter snow removal tasks.