Craftsman 536.88521 Gasoline and OIL Mixture, To Stop Engine, To Start Engine Electric Start

Page 8

DO NOT FILL THE FUEL TANK WITH GASOLINE THAT DOES NOT HAVE OIL MIXED IN IT.

THE FUEL TANK.

OII

Shake Can

(1/2 cup or 3.2 oz.)

 

1 U,S. gallon container

GASOLINE AND OIL MIXTURE

Mix gasoline and oil as follows:

•Pour I U.S. quart of fresh, clean, unleaded automotive gasoline to a gallon gasoline container.

•Add 3.2 oz of clean, high quality, Crafts- man two-cycle oil into the gasoline container (One 3.2 ounces of oil pro- vided).

IMPORTANT: Do not use outboard motor oil or automobile oils, such as SAE 30 oil,

or multi-viscosity oils, such as 10W-30 or 10W-40.

•Reinstall the cap on the gasoline con- tainer and shake container vigorously so the oil mixes with the gasoline

•Add an additional 3 U.S. quarts of gasoline to the gallon container and shake the container again.

WARNING: Gasoline is flammable and

caution must be used when handling or storing it. Do not fill fuel tank while snow thrower is running, hot, or when snow

thrower is in an enclosed area. Keep away from open flame, electrical spark, and do

not smoke while filling the fuel tank. Never fill fuel tank completely; but fill the tank to within 1/4-1/2 inch from the top to provide space for expansion of fuel. Always fill fuel tank outdoors and use a funnel or spout to

prevent spilling. Make sure to wipe up any spilled fuel before starting the engine. Store gasoline in a clean, approved container, and keep the cap in place on the container.

Keep gasoline in a cool, well ventilated place; never in the house. Never buy more than a 30 day supply of gasoline to ensure volatility. Gasoline is intended to be used as a fuel for internal combustion engines; therefore, do not use gasoline for any other purpose. Since many children like the smell of gasoline, keep it out of their reach

because the fumes are dangerous to inhale, as well as being explosive.

TO STOP ENGINE

•To stop the engine, turn the key to OFF and remove key. Keep key in a safe place. The engine will not start without the key. See figure on next page.

TO START ENGINE (ELECTRIC START)

The snow thrower engine is equipped with a 120 volt AC electric starter and recoil starter.

Before starting the engine, be certain that

you have read the following information:

COLD START

•Insert the key and turn ON.

•Move the choke control to the FULL position.

•Connect the power cord to the switch box on the snow thrower.

•Plug the other end of the power cord into a three hole, grounded 120 volt AC receptacle.

•Push the primer button while covering the vent holes as follows: (Remove finger from primer button between primes).

Do not prime if temperature is above 50°F.

Two times if temperature is 50 ° F to 15°F. Four times if temperature is below 15°F.

•Push down on the starter button until the

engine starts. Do not crank for more than 10 seconBs at a time. This electric starter

is thermally protected. If overheated it will stop automatically and can be restarted

only when it has cooled to a safe tempera- ture (a wait of about 5 to 10 minutes is required.

•Disconnect the power cord from the receptacle first and then from the switch box on the snow thrower.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SEARS, Roebuck and CO., Hoffman Estates, IL 60179 U.S.A 761893 07/27/98Before USE Limited TWO-YEAR Warranty on Craftsman Snow ThrowerEngine exhaust from this product Safe Storage Fuel SafetyDeadly GAS REPAIR/ADJUSTMENTSSAFETY Checklist All assembly instructions have been CompletedTo Remove Snow Thrower from Carton To Assemble the Snow ThrowerPrimer Button Injects fuel directly into Chute Control Lower Handle Chute DeflectorChokeButton S. I Imperzal s.I. Metric To USE Auger Propel ActionBefore Starting Engine Fill GASGasoline and OIL Mixture To Stop EngineTo Start Engine Electric Start Cold StartTo Start Engine Recoil Start To Stop EngineWarm Start Product Specifications DRY and Average SnowWET Packed Snow Snow Throwing TipsCustomer Responsibilities Service Lubrication Chart Lubrication AS RequiredRecords Spark PlugCarburetor Adjustment To Adjust the Chute Crank AssemblyTo Adjusttheaugercontrol Cable To Remove TOP CoverScrews to be Boltsto beremoved from Top removedfrom To Adjust Brake PADTo Remove Belt Cover Left F#ame To Replace the Drive BeltTo Replace the Auger Adjust Engine Speed Push the spark plug wire onto the spark plugEngine Service Snow Thrower Storage Engine StorageCarbu Drain Right side view Engine OtherAdjust auger control cable TroubleCorrection CausePart Name Electric Start AssemblyCraftsman 21 5H.P. Snow Thrower Part Name ENGINE/DRIVE AssemblyOraftsman 21 5H.P. Snow Thrower Frame Assembly Discharge Chute AssemblyBelt Cover Assembly 481 52010540 51oPartname Part Name Craftsman 21 -5H.P.SNOW Thrower Wheel AssemblyHandle Assembly Part Name Partno Craftsman 21 5H.P. Snow ThrowerDecals Craftsman 2-CYCLE Engine Model Number Model Number REF. PART# Part Name Throttle ShutterRetainer Starter noStarter Rewind ANTI-DRIFT Dust WasherPinion Driver Part

536.88521 specifications

The Craftsman 536.88521 is a versatile and powerful snow blower, designed to efficiently tackle heavy snowfall and keep pathways and driveways clear during winter months. With a strong focus on usability and performance, this model is favored by homeowners looking for reliable equipment that can handle various snow conditions.

One of the key features of the Craftsman 536.88521 is its 24-inch clearing width, which allows for quick and efficient snow removal. The robust auger design ensures that even heavy, wet snow can be efficiently thrown aside, making it suitable for various climates and snow types. The powerful 179cc engine provides ample power, allowing the snow blower to clear deep snow without straining.

Ergonomically designed, the Craftsman 536.88521 includes adjustable handles that promote comfortable operation while reducing fatigue during extended use. The easy-to-use controls are conveniently located, enabling users to adjust speed settings and the direction of the snow discharge without having to stop. The model features a 180-degree rotating chute that allows for precise snow placement, which is essential for maintaining clean walkways and driveways.

Technology is integral to the Craftsman 536.88521, featuring electric start capabilities for hassle-free ignition, eliminating the need for strenuous pull-starts in cold conditions. Additionally, the snow blower is equipped with a heavy-duty scraper blade that ensures efficient clearing down to the pavement, reducing the chances of ice buildup.

Another notable characteristic of the Craftsman 536.88521 is its durable construction. Built with high-quality materials, it is designed to withstand harsh winter conditions, ensuring longevity and reliability over time. The snow blower's large, enhanced tires provide excellent traction and maneuverability, allowing users to navigate through tough snow conditions with ease.

Overall, the Craftsman 536.88521 stands out as a dependable snow blower, combining power, efficiency, and user-friendly features. Its versatility makes it an excellent choice for homeowners looking to maintain clear and safe outdoor areas during winter storms. With the right balance of technology and practicality, it promises an effective solution for winter snow removal tasks.
Top Page Image Contents