Removing the Spiral Auger Housing, Problem

STORAGE RECOMMENDATIONS

PARTS TO REMOVE AT END OF SEASON

•Lower the snow thrower to the ground. Remove the snow thrower from the tractor.

Clean the snow thrower thoroughly. Wash off any salt deposit which may have dried on the thrower and housing.

Any bare metal that has become exposed should be painted or coated with a light oil to prevent rust. Store in a dry place.

REMOVING THE SPIRAL AUGER HOUSING

*Lower the snow thrower to the ground.

Remove the attachment pin. See figure 54 on page 24.

Lock the snow thrower's lift handle in the down position to decrease belt tension.

Release the spring tension from the auger belt idler arm on the bottom of the clutch/idler assembly. Remove the auger drive belt from the clutch/idler assembly. See figure 56 on page 24.

Pull the spiral auger housing assembly off of the tractor.

Remove the clutch/idler assembly. (The two hanger brackets and the two shoulder bolts may be left attached to the tractor frame.)

Remove the drive belt from the engine pulley.

If you replaced the engine pulley keeper on a manual attachment clutch tractor, reinstall the tractor's original engine pulley keeper. See figure 33 on page 17 or figure 39 on page 19.

If you have a rod operated attachment clutch, remove the engagement rod from the tractor's clutch arm. See figure 29 on page 16.

If a front mounted attachment is to be used, remove the side plates from the tractor. Be sure to assemble bolts back into the empty holes in the tractor frame.

PROBLEM

Spiral augers don'tturn

Clogged discharge chute

Snow thrower stalls tractor engine

CAUSE

1.Upper or lower V belt too loose

2.Upper or lower V belt broken

3.Shear bolts are sheared.

1.Tractor ground speed too fast

2.Tractor throttle set too low

3.Snow too deep

4.Snow melts during contact with the snow thrower

1.Object jammed in spiral auger

2.Hard or heavy snow

CORRECTION

1.Increase tension on V belt

2.Replace V belt

3.Replace shear bolts

1.Use lower tractor gear

2.Increase to full throttle

3.Raise the snow thrower

4.Allow snow thrower to cool to outdoor temperature before using

1.Stop engine, disengage the snow thrower clutch and clear the auger

2.Increase to full throttle and decrease ground speed

Front wheels	slide instead of steering	Not enough traction at front wheels		1. Increase scraper		plate clearance
					by lowering skid	shoes
				2. Pull down on lift handle to
					increase weight on front wheels
Snow thrower	rides up over snow	1. Tractor ground	speed too fast	1.	Reduce ground speed
		2. Bottom snow	is icy or hard packed	2.	Lower the skid shoes so that front
					of skid shoe is lower than the rear

486.24837 specifications

The Craftsman 486.24837 is a versatile outdoor power equipment tool that has garnered attention for its efficient performance and user-friendly features. Designed primarily for homeowners and gardening enthusiasts, this model serves as a reliable solution for various landscaping tasks, such as mowing lawns, managing garden beds, and trimming hedges.

One of the standout features of the Craftsman 486.24837 is its robust engine, which provides ample power to handle tougher jobs with ease. Equipped with a powerful motor, it enables users to tackle thick grass and harsh terrain that would typically challenge lesser models. The engine's efficient fuel consumption further enhances its usability, enabling prolonged use without frequent refueling.

In terms of cutting performance, the Craftsman 486.24837 incorporates an adjustable cutting height feature. This allows users to customize the height setting according to their specific needs, whether they are looking for a close trim or a more lifted finish for their lawns. The extended cutting deck ensures a wider cutting path, enabling quicker mowing, hence reducing overall time spent on yard tasks.

Durability is a key aspect of the Craftsman 486.24837. Constructed with high-quality materials, it is designed to withstand the rigors of outdoor use. The sturdy build ensures that the machinery retains its efficiency and effectiveness over time, making it a worthwhile investment for regular maintenance.

The ergonomics of the Craftsman 486.24837 also deserve mention. With a comfortable grip and user-friendly controls, it minimizes user fatigue during prolonged use, allowing for smooth operation. The lightweight design enhances maneuverability, ensuring that both novice users and seasoned gardeners can operate it with confidence and ease.

In addition to its primary features, the Craftsman 486.24837 includes technologically advanced elements such as easy start mechanisms and safety features. These enhancements prioritize user safety while also making the operation more accessible for everyone.

In conclusion, the Craftsman 486.24837 stands out as a reliable, efficient, and easy-to-use outdoor power equipment. With features designed to improve cutting efficiency, durability, and user comfort, it serves as an invaluable tool for homeowners looking to maintain their outdoor spaces effectively. Its combination of power and practicality makes it a popular choice among gardening enthusiasts and landscape professionals alike.