Craftsman 247.88851 owner manual Chart, Checking Oil Level, Changing Oil, Spark Plug

Page 19

SAEviscositygradeaccordingtotheexpected operatingtemperature.

colder .,_32

o --._

warmer

 

I

 

5W30 _

I

SAE30

 

I

 

 

Viscosity

Chart

 

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi- viscosity oils will result in increased oil consumption

when used above 32°F. Check your snow thrower's engine oil level more frequently to avoid possible engine damage from running low on oil.

Refer to the viscosity chart for proper selection of engine oil.

Checking Oil Level

Before operating the snow thrower, check the oil level.

With engine on level ground, the oil must be to FULL mark on dipstick.

Stop engine and wait several minutes before

checking oil level. Remove oil fill cap and dipstick.

Wipe dipstick clean, insert it into oil fill hole and tighten securely.

Remove dipstick and check. If oil is not up to the FULL mark on dipstick, add 5W30 oil.

Changing Oil

Change engine oil after the first two hours of operation and every 25 hours thereafter.

In order to do that you will have to first drain the spent engine oil from the engine and then refill with fresh oil.

•Drain oil while engine is warm. Remove oil drain cap located at the bottom of the recoil starter of the engine. Catch oil in a suitable container.

When engine is drained of all oil, replace drain plug securely.

•Remove the dipstick from the oil fill tube. For location of the oil fill tube, see Figure 17 inset. Pour fresh oil slowly through the tube. Replace dipstick.

•Check and make sure that the level of oil is up to the FULL mark on the dipstick.

,_

WARNING:

Temperature of muffler and

 

nearby areas may exceed 150 ° F(65°C).

 

Avoid these

areas.

Spark Plug

Clean area around the spark plug base.

•Remove and inspect the spark plug.

•Replace the spark plug if electrodes are pitted, burned, or the porcelain is cracked. See Figure 21.

•Clean the spark plug and reset the gap to 0.030" at least once a season or every 50 hours of operation. See Figure 21.

•Spark plug replacement is recommended at the start of each season. Refer to engine parts list for correct spark plug type.

NOTE: Do not sandblast spark plug. Spark plug should be cleaned by scraping or wire brushing and washing with a commercial solvent.

Electrodes

.030"Porcelain Gap

Figure 21

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Craftsman Two -Year Warranty on Craftsman Snow Thrower ContentTraining KWARNING LHI Tools Required Attaching Handle AssemblyRemoving From Carton Loose PartsBolt Hex Attaching Chute CrankCotter Pin Underthisfor i HandlePanel JChute Crank Bracket Lower Chute Carriage Bolt Crank Bracket Hex Lock NutFerrule Attaching Clutch CablesAttaching Shift Rod Attaching Turn TriggersFinal Adjustments Lamp WiringHex Nut Adjusting Traction Drive ControlAdjusting Skid Shoe Make sure that the spark plug is disconnectedDischarge Chute Meets Ansi Safety StandardsKnowing Your Snow Thrower Chute CrankOperating Controls Cold Start Before Starting EngineTo Start Engine Electric StarterFrozen Recoil Starter Operating Snow ThrowerWarm Start Recoil StarterTo Engage Augers To Throw SnowOperating Tips Before StoppingCustomer Responsibilities General RecommendationsLubrication Engine MaintenanceCheck V-belts Spark Plug ChartChecking Oil Level Changing OilShift Rod AdjustmentsAugers Auger ClutchAuger Drive Belts Shave Plate And Skid ShoesSelf-Tapping Friction Wheel Rubber Drive BeltBell Washer Hex Bolt Engine Oil CarburetorBowl Drain Preparing Snow ThrowerPossible Cause Sears Craftsman 9.0 H.P. Snow Thrower Model Qty Sears Craftsman 9.0 H.P. Snow Thrower Model Actuator Sears Craftsman 9.0 H.P. Snow Thrower Model Key Pad No PaR No Description Qty Sears Craftsman 9.0 H.P, Snow Thrower Model Key Pa No Screw Flat IdlerCarburetor 219//1 3t0G 305100 224 315Flywheel Nut MCR220 35438 Choke Knob Recoil Starter 8OO-4-REPAIR

247.88851 specifications

The Craftsman 247.88851 is a standout lawn mower, designed to meet the needs of homeowners looking for a reliable and efficient gardening solution. This model combines innovative features with user-friendly technology to provide an exceptional mowing experience. Its power and performance are backed by a robust 21-inch cutting deck, making it ideal for tackling small to medium-sized yards with precision.

One of the notable features of the Craftsman 247.88851 is its 140cc engine. This engine offers sufficient power to handle various grass types and conditions, ensuring a clean and even cut every time. The starting mechanism boasts a reliable pull-start system, simplifying the operation and enhancing user convenience. This model also incorporates a 5-position height adjustment feature, allowing users to customize their mowing height according to their lawn's specific needs.

The Craftsman 247.88851 stands out with its ease of maneuverability. Its lightweight design and compact frame facilitate effortless navigation around obstacles such as trees and garden beds. The lawn mower is equipped with 7-inch front wheels and 8-inch rear wheels, providing excellent stability and traction. This stability is crucial for achieving optimal mowing results, especially on uneven terrain.

Another remarkable technology featured in the Craftsman 247.88851 is its superior grass collection system. The mower comes with a 1.9-bushel grass bag that efficiently collects clippings, ensuring a tidy lawn finish. Alternatively, users can opt for mulching functionality, which finely cuts and distributes the clippings back into the lawn, promoting healthy growth and providing essential nutrients.

In terms of build quality, the Craftsman 247.88851 is constructed with durable materials that withstand the rigors of regular use. Its sturdy design minimizes vibrations, resulting in a smoother mowing experience while reducing operator fatigue.

Overall, the Craftsman 247.88851 is an excellent choice for homeowners seeking a powerful, efficient, and easy-to-use lawn mower. Its combination of a strong engine, precise cutting capabilities, and advanced features makes it a valuable addition to any garden maintenance toolkit. Whether tackling overgrown patches or maintaining a well-groomed lawn, this mower delivers consistent and reliable performance.
Top Page Image Contents