Attaching Chute Crank, Bolt Hex | Craftsman 247.88851 specification

Secure bottom hole on the handle to the snow thrower using 5/16 x3/4" hex bolt and lock washer from the hardware pack (group A on page 5 ). Do not tighten at thistime. See Figure 2.

Lock Washer &

Hex Bolt (1-3/4")

Right Handle
Handle
Tab	Hex Bolt (5/8")
	Figure 2

Place a handle tab, included in the hardware

pack (group A ), over the upper hole in handle so that the contour of the handle tab matches that

of the handle. See Figure 2.

Secure handle tab to the snow thrower using hex bolt (5/16 x 1-3/4" long) and lock washer from the same group in the hardware pack. Do

not tighten at this time.

Attach the left handle in the same manner. Do not tighten at this time.

Place the handle panel in position between the handles so the ends of the curved part of the handles go through the slots in the handle panel. While placing the handle panel, make sure to route chute and chute cable between the handle and the panel keeping the cable on top of the engine. Align the holes in the handle with the holes on the two sides of the handle panel. See

Figure 3.

Right Handle

Hex Bolt

[ndFlange Nut

1 Holes

Carriage Bolt,

and Hex Nut

Figure 3

	Attachthe handle panel to the handle with two
	carriage bolts, cupped washers (cupped side
	against the handle panel) and hex nuts on each	/
	side. See Figure 3. You will find these fasteners
	in group B of the hardware pack. Align the
	contour of the carriage bolt head with the
	contour of the carriage bolt head with the
	handle. Tighten the hardware.
	Attaching Chute
	Place the chute assembly over the chute
	opening with the chute facing front of the unit.

NOTE: Make sure that the chute cables are

straightened while assembling the chute.

Place the chute flange keeper (flat side down) beneath lip of chute assembly as shown in Figure 4.You will find the chute flange keepers in group E of the hardware pack.

Insert 1/4-20 hex bolt and flange nut (group E of the hardware pack) up through chute flange keeper and chute assembly as shown in Figure

4.Do not tighten at this time. Rotate chute to install all the flange keepers.

Chute

Hex

Bolt Hex

CKIheaU_g:r

Figure 4

After assembling all three chute flange keepers, tighten, then back off 1/4 turn to allow easier movement of the chute. Use (2) 7/16" wrenches.

Attaching Chute Crank

•On the left side of the handle panel, place the upper chute crank bracket on to the inside of the handle panel support. Locate this bracket and associated harware in group F of hardware pack. See Figure 5.

Insert hex bolt through the upper chute crank bracket, handle panel support, and upper left handle. Secure the bracket using cupped washer and hex nut. Make sure that the cupped

side of the washer is set against the contour of the handle.

247.88851 specifications

The Craftsman 247.88851 is a standout lawn mower, designed to meet the needs of homeowners looking for a reliable and efficient gardening solution. This model combines innovative features with user-friendly technology to provide an exceptional mowing experience. Its power and performance are backed by a robust 21-inch cutting deck, making it ideal for tackling small to medium-sized yards with precision.

One of the notable features of the Craftsman 247.88851 is its 140cc engine. This engine offers sufficient power to handle various grass types and conditions, ensuring a clean and even cut every time. The starting mechanism boasts a reliable pull-start system, simplifying the operation and enhancing user convenience. This model also incorporates a 5-position height adjustment feature, allowing users to customize their mowing height according to their lawn's specific needs.

The Craftsman 247.88851 stands out with its ease of maneuverability. Its lightweight design and compact frame facilitate effortless navigation around obstacles such as trees and garden beds. The lawn mower is equipped with 7-inch front wheels and 8-inch rear wheels, providing excellent stability and traction. This stability is crucial for achieving optimal mowing results, especially on uneven terrain.

Another remarkable technology featured in the Craftsman 247.88851 is its superior grass collection system. The mower comes with a 1.9-bushel grass bag that efficiently collects clippings, ensuring a tidy lawn finish. Alternatively, users can opt for mulching functionality, which finely cuts and distributes the clippings back into the lawn, promoting healthy growth and providing essential nutrients.

In terms of build quality, the Craftsman 247.88851 is constructed with durable materials that withstand the rigors of regular use. Its sturdy design minimizes vibrations, resulting in a smoother mowing experience while reducing operator fatigue.

Overall, the Craftsman 247.88851 is an excellent choice for homeowners seeking a powerful, efficient, and easy-to-use lawn mower. Its combination of a strong engine, precise cutting capabilities, and advanced features makes it a valuable addition to any garden maintenance toolkit. Whether tackling overgrown patches or maintaining a well-groomed lawn, this mower delivers consistent and reliable performance.