Husqvarna 524S owner manual HOW to SET UP Your Snow Thrower, Tool BOX See Fig, Unfold Upper Handle

Page 5

ASSEMBLY / PRE-OPERATION

HOW TO SET UP YOUR SNOW THROWER

TOOL BOX (See Fig. 8)

A toolbox is provided on your snow thrower. The toolbox is located on top of the belt cover. Store the extra shear bolts, nuts and multi-wrench provided in parts bag in the toolbox.

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

CONTROL

ROD

PLASTIC TIE

UPPER

HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

SPEED CONTROL ROD

RETAINER

SPRING

SPEEDSPEED

CONTROL CONTROL

BRACKET LEVER

FIG. 2

5

INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4)

The traction drive control rod has the long loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.

2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod into hole in drive control bracket. Secure with retainer spring.

TRACTION DRIVE

CONTROL ROD

RUBBER

SLEEVE

LOOP

OPENING

DOWN

PIVOT

BRACKET

FIG. 3

TRACTION DRIVE

RETAINER

CONTROL LEVER

SPRING

TRACTION

DRIVE

CONTROL

ROD

DRIVE

CONTROL

BRACKET

FIG. 4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 524S Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Parts Packed Separately in Carton Assembly / PRE-OPERATIONInstall Speed Control ROD See Figs HOW to SET UP Your Snow ThrowerInstall Traction Drive Control ROD See Figs Tool BOX See FigCheck Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotater Head See Fig Know Your Snow Thrower OperationPrimer Ignition KEYMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerAuger EngineTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig Before Starting the Engine To Adjust Skid Plates See FigADD Gasoline See Fig Scraper BARTo Start Engine Snow Throwing TipsBefore Stopping If Recoil Starter has FrozenGeneral Recommendations MaintenanceBefore Each USE LubricationEngine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Shear Bolts See FigTo Replace Belts See Fig Other StorageTroubleshooting Service Notes Repair Parts Repair Parts Auger Housing / Impeller Assembly Control Panel / Discharge Chute KEY Part Description Handles 532 18 41-10 Lever, Auger Control, RH Drive Repair Parts Chassis / Engine / Pulleys KEY Part Description Wheels / Decals KEY Part Description Sion Tmita ILD NA SON ITP Eexc 4ON ITC ES Rantywar Tementsta

524S specifications

The Husqvarna 524S is a high-performance handheld leaf blower designed for both residential and professional use. It is a prime example of Husqvarna's commitment to providing powerful and efficient tools for outdoor maintenance. With a sleek design and innovative features, the 524S makes yard cleanup tasks easier and more effective.

One of the standout features of the Husqvarna 524S is its powerful yet efficient engine. Powered by a 25cc two-stroke engine, it delivers impressive air speeds and volume, making it capable of handling heavy leaves, grass clippings, and debris. The engine is designed to provide excellent fuel efficiency, ensuring that users can work longer on a single tank without compromising on performance.

The Husqvarna 524S employs advanced X-Torq engine technology, which reduces harmful emissions and increases fuel efficiency by up to 20%. This technology not only contributes to a greener environment but also means that operators can work without the constant worry of excessive noise and emissions, making it suitable for use in residential neighborhoods.

Another notable characteristic of the 524S is its lightweight design. Weighing in at just under 5 pounds, this blower is easy to maneuver, reducing user fatigue during extended periods of operation. The comfortable ergonomic handle ensures a secure grip, providing excellent control and reducing strain on the hands and arms.

In addition to its powerful performance, the Husqvarna 524S includes several user-friendly features. The cruise control function allows users to maintain a consistent airspeed, which is particularly useful for longer tasks such as clearing large areas of leaves. The blower's adjustable nozzle further enhances versatility by allowing users to customize the airflow direction according to their specific needs.

Moreover, Husqvarna has integrated a smart start feature into the 524S, which simplifies the starting process. This technology reduces the amount of effort needed to pull the starter cord, making it easier for users of all experience levels to get the blower up and running quickly.

The durable construction of the Husqvarna 524S ensures that it can withstand the rigors of frequent use. From the high-quality materials used in its manufacture to its robust build, this leaf blower is designed for longevity, making it a wise investment for anyone in need of dependable outdoor equipment.

In summary, the Husqvarna 524S is a well-rounded leaf blower that combines power, efficiency, and user-friendly features. With its lightweight design, advanced engine technology, and ease of use, it stands out as an excellent choice for both homeowners and professionals seeking reliable outdoor equipment for leaf and debris management.
Top Page Image Contents