Husqvarna 524S owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotate chute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 524S Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION Remove Snow Thrower from CartonInstall Traction Drive Control ROD See Figs HOW to SET UP Your Snow ThrowerInstall Speed Control ROD See Figs Tool BOX See FigInstall Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Auger HOW to USE Your Snow ThrowerStopping EngineUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig ADD Gasoline See Fig To Adjust Skid Plates See FigBefore Starting the Engine Scraper BARBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenBefore Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Service Notes Repair Parts Repair Parts Auger Housing / Impeller Assembly Control Panel / Discharge Chute KEY Part Description Handles 532 18 41-10 Lever, Auger Control, RH Drive Repair Parts Chassis / Engine / Pulleys KEY Part Description Wheels / Decals KEY Part Description Rantywar Tementsta Sion Tmita ILD NA SON ITP Eexc 4ON ITC ES

524S specifications

The Husqvarna 524S is a high-performance handheld leaf blower designed for both residential and professional use. It is a prime example of Husqvarna's commitment to providing powerful and efficient tools for outdoor maintenance. With a sleek design and innovative features, the 524S makes yard cleanup tasks easier and more effective.

One of the standout features of the Husqvarna 524S is its powerful yet efficient engine. Powered by a 25cc two-stroke engine, it delivers impressive air speeds and volume, making it capable of handling heavy leaves, grass clippings, and debris. The engine is designed to provide excellent fuel efficiency, ensuring that users can work longer on a single tank without compromising on performance.

The Husqvarna 524S employs advanced X-Torq engine technology, which reduces harmful emissions and increases fuel efficiency by up to 20%. This technology not only contributes to a greener environment but also means that operators can work without the constant worry of excessive noise and emissions, making it suitable for use in residential neighborhoods.

Another notable characteristic of the 524S is its lightweight design. Weighing in at just under 5 pounds, this blower is easy to maneuver, reducing user fatigue during extended periods of operation. The comfortable ergonomic handle ensures a secure grip, providing excellent control and reducing strain on the hands and arms.

In addition to its powerful performance, the Husqvarna 524S includes several user-friendly features. The cruise control function allows users to maintain a consistent airspeed, which is particularly useful for longer tasks such as clearing large areas of leaves. The blower's adjustable nozzle further enhances versatility by allowing users to customize the airflow direction according to their specific needs.

Moreover, Husqvarna has integrated a smart start feature into the 524S, which simplifies the starting process. This technology reduces the amount of effort needed to pull the starter cord, making it easier for users of all experience levels to get the blower up and running quickly.

The durable construction of the Husqvarna 524S ensures that it can withstand the rigors of frequent use. From the high-quality materials used in its manufacture to its robust build, this leaf blower is designed for longevity, making it a wise investment for anyone in need of dependable outdoor equipment.

In summary, the Husqvarna 524S is a well-rounded leaf blower that combines power, efficiency, and user-friendly features. With its lightweight design, advanced engine technology, and ease of use, it stands out as an excellent choice for both homeowners and professionals seeking reliable outdoor equipment for leaf and debris management.
Top Page Image Contents