Husqvarna 521SSR, 521SSE manual HOW to Lubricate the Idler ARM

Page 19

SERVICE RECOMMENDATIONS

HOW TO LUBRICATE THE IDLER ARM

CAUTION: DO NOT get oil on the belt or pulleys. This will cause the belt to slip and experience premature failure.

1.Remove the screws from the belt cover (see Figure 12). Remove the belt cover.

2.Apply a drop of oil to the idler arm at point B (see Figure 13).

3.Pivot the auger bail up and down several times.

4.Wipe off the excess oil.

5.Install the cover.

Belt Cover

Figure 12

Idler Arm

B

Figure 13

1740274

19

Image 19
Contents 1740274 Operator’s ManualFor Your Records IntroductionRules for Safe Operation Operating Symbols and their meaningsTraining Children Table of Contents Identifying Your Snowthrower Safety DecalsLimited Warranty OWNER’S Information Warranty StatementHUSQVARNA’S Obligations Under the Warranty Customer Responsibilities Items not Covered by this WarrantyProcedure to Obtain Warranty Consideration Exceptions and LimitationsHOW to Remove the Snow Thrower from the Carton AssemblyParts Bags Contents Tools Required for AssemblyHOW to Install the Chute HOW to Assemble the HandleChecklist Know Your Snowthrower OperationEngine and Snow Thrower Operating Controls HOW to Move Forward HOW to Stop the SnowthrowerHOW to Control Snow Discharge HOW to Throw SnowFuel Mixture Chart mixture HOW to MIX the Fuel MixtureBefore Starting the Engine Switch box HOW to Stop the EngineHOW to Start the Engine HOW to Start a Cold EngineWET Packed Snow HOW to Clear a Clogged Discharge ChuteSnow Throwing Tips DRY and Average SnowLubrication Service RecommendationsService Recommendations After Each USEHOW to Lubricate the Idler ARM HOW to Adjust the Belt Tension MaintenanceHOW to Replace the Auger Belt HOW to Free the Auger Cable HOW to Replace the Scraper BladeHOW to Adjust the Auger Control Cable HOW to Adjust the Chute CrankIt cannot make contact with the spark plug HOW to Replace the Drive Belt HOW to Replace the Auger To Adjust or Replace the Spark Plug To Adjust the CarburetorThis Spark Ignition System Complies with Canadian ICES-002 OFF Season Storage StorageRemoving the Snowthrower from Storage Problem Look for Remedy Trouble Shooting Chart