Husqvarna 1827SB Maintenance, General Recommendations, Before Each USE, Lubrication, Snow Thrower

Page 13

MAINTENANCE

GENERAL RECOMMENDATIONS

LUBRICATION CHART

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your snow thrower.

At least once a season, check to see if you should make any of the adjustments described in the Service and Ad- justments section of this manual.

At least once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

SAE 30 Motor Oil

See “ENGINE” in

Maintenance section

General

Purpose

Grease

Pivot points

Engine

Auger

oil

grease fittings

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

Maintain proper air pressure in both tires (14–17 PSI).

Keep tires free of gasoline and oil, which can harm rubber.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

13

Image 13
Contents 1827SB Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONParts Packed Separately in Carton Remove Snow Thrower from CartonInstall Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Know Your Snow Thrower OperationPrimer Ignition KEYRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo USE Fuel SHUT-OFF Valve See Fig To USE Choke Control See FigTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig Before Starting the Engine To Adjust Skid Plates See FigScraper BAR See Fig Check Engine OIL Level See FigTo Start Engine Snow Throwing TipsBefore Stopping If Recoil Starter has FrozenGeneral Recommendations MaintenanceBefore Each USE LubricationEngine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsShear Bolts See Fig To Remove Belt Cover See FigTo Replace Belts See Fig To Remove Wheels See Fig To Adjust Cable Tension See FigCarburetor Engine SpeedOther StorageFuel System Engine OILTroubleshooting Warranty Statement

1827SB specifications

The Husqvarna 1827SB is a standout snow blower designed for residential use, equipped with a range of advanced features that make it efficient and user-friendly. This compact yet powerful snow blower is ideal for clearing snow from driveways, sidewalks, and other outdoor areas during the winter months.

One of its main features is the powerful 208cc engine. This engine provides impressive performance, allowing the Husqvarna 1827SB to tackle heavy snowfall with ease. The reliable starter system ensures quick engine ignition, even in cold weather, allowing users to get started without hassle.

The Husqvarna 1827SB is equipped with a 27-inch clearing width, making it capable of covering large areas quickly. The steel auger and impeller work together to break up and efficiently throw snow, with an impressive throwing distance of up to 33 feet. This ensures that snow is not only cleared effectively but also dispersed far from the clearing area, reducing the need for additional shoveling.

Versatility is enhanced with the incorporation of multiple speed options. The Husqvarna 1827SB features six forward and two reverse speeds, enabling operators to adjust the speed according to their comfort and the snow conditions. The large, oversized tires provide excellent traction and stability, making it easy to maneuver through deep snowdrifts.

User convenience is further highlighted in the design of the controls. The ergonomically designed handlebar is adjustable, allowing users to find the optimal height for increased comfort during operation. Moreover, the control panel is intuitively laid out, providing easy access to essential functions such as chute direction and speed adjustments, even while wearing gloves.

The Husqvarna 1827SB also boasts an optional heated handgrip feature, which adds an extra layer of comfort during extended use in frigid temperatures. Additionally, its heavy-duty, durable construction ensures that it can withstand harsh winter conditions and provide reliable performance year after year.

In summary, the Husqvarna 1827SB is a robust, efficient snow blower equipped with a powerful engine, versatile speed options, and user-friendly features. Its combination of durability, performance, and comfort make it a top choice for homeowners looking to keep their pathways clear during winter storms.