Husqvarna 1827SB manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

1.Retrieve vinyl sleeve and spring from bag of parts and retrieve the auger control rod from carton chute tray. Slide straight rod end through the small hole in the vinyl sleeve. Hook spring in hole in rod end.

2.Hook end of spring into control arm with loop opening up as shown. (See Fig. 5)

3.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

VINYL

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotator head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotator head over chute bracket. If neces- sary, rotate chute assembly to align square and pin on un- derside of chute rotator head with holes in chute bracket.

3.With chute rotator head and chute bracket aligned, position chute rotator head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 1827SB Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineTo USE Fuel SHUT-OFF Valve See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Scraper BAR See Fig To Adjust Skid Plates See FigBefore Starting the Engine Check Engine OIL Level See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenBefore Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height To Remove Belt Cover See FigTo Replace Belts See Fig Carburetor To Adjust Cable Tension See FigTo Remove Wheels See Fig Engine SpeedFuel System StorageOther Engine OILTroubleshooting Warranty Statement

1827SB specifications

The Husqvarna 1827SB is a standout snow blower designed for residential use, equipped with a range of advanced features that make it efficient and user-friendly. This compact yet powerful snow blower is ideal for clearing snow from driveways, sidewalks, and other outdoor areas during the winter months.

One of its main features is the powerful 208cc engine. This engine provides impressive performance, allowing the Husqvarna 1827SB to tackle heavy snowfall with ease. The reliable starter system ensures quick engine ignition, even in cold weather, allowing users to get started without hassle.

The Husqvarna 1827SB is equipped with a 27-inch clearing width, making it capable of covering large areas quickly. The steel auger and impeller work together to break up and efficiently throw snow, with an impressive throwing distance of up to 33 feet. This ensures that snow is not only cleared effectively but also dispersed far from the clearing area, reducing the need for additional shoveling.

Versatility is enhanced with the incorporation of multiple speed options. The Husqvarna 1827SB features six forward and two reverse speeds, enabling operators to adjust the speed according to their comfort and the snow conditions. The large, oversized tires provide excellent traction and stability, making it easy to maneuver through deep snowdrifts.

User convenience is further highlighted in the design of the controls. The ergonomically designed handlebar is adjustable, allowing users to find the optimal height for increased comfort during operation. Moreover, the control panel is intuitively laid out, providing easy access to essential functions such as chute direction and speed adjustments, even while wearing gloves.

The Husqvarna 1827SB also boasts an optional heated handgrip feature, which adds an extra layer of comfort during extended use in frigid temperatures. Additionally, its heavy-duty, durable construction ensures that it can withstand harsh winter conditions and provide reliable performance year after year.

In summary, the Husqvarna 1827SB is a robust, efficient snow blower equipped with a powerful engine, versatile speed options, and user-friendly features. Its combination of durability, performance, and comfort make it a top choice for homeowners looking to keep their pathways clear during winter storms.
Top Page Image Contents