Husqvarna 1827SB manual To Remove Wheels See Fig, To Adjust Cable Tension See Fig, Carburetor

Page 17

SERVICE AND ADJUSTMENTS

TO REMOVE WHEELS (See Fig. 21)

•Remove the klik pin and remove wheel from axle.

IMPORTANT: When installing wheel, be sure to use the in- nermost hole in axle and the wheel hub hole. To disengage drive system from the wheels (for pushing or transporting the snow thrower), remove klik pin from wheel hub and insert pin into the outermost hole in axle only.

NOTE: To seal punctures or prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

KLIK PIN

OUTER HOLE

 

INNER

 

HOLE

WHEEL

WHEEL HUB

FIG. 21

TO ADJUST CABLE TENSION (See Fig. 22)

Adjust cable tension by turning the adjuster turn buckle, located on the right hand cable. Grasp the long section tightly and turn the short section to lengthen the adjuster. Adjust until cable is snug.

ADJUSTER TURN

BUCKLE

FIG. 22

ENGINE

SEE ENGINE MANUAL.

CARBURETOR

Your carburetor is not adjustable. Engine performance should not be affected at altitudes up to 2,134 meters. If your engine does not operate properly due to suspected carburetor problems, take your snow thrower to a service center/department.

ENGINE SPEED

Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous and will void the warranty. If you think the engine-governed high speed needs adjusting, contact a service center/depart- ment, which has the proper equipment and experience to make any necessary adjustments.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 1827SB Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONParts Packed Separately in Carton Remove Snow Thrower from CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Know Your Snow Thrower OperationPrimer Ignition KEYRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo USE Fuel SHUT-OFF Valve See Fig To USE Choke Control See FigTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig Before Starting the Engine To Adjust Skid Plates See FigScraper BAR See Fig Check Engine OIL Level See FigTo Start Engine Snow Throwing TipsBefore Stopping If Recoil Starter has FrozenGeneral Recommendations MaintenanceBefore Each USE LubricationEngine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsShear Bolts See Fig To Remove Belt Cover See FigTo Replace Belts See Fig To Remove Wheels See Fig To Adjust Cable Tension See FigCarburetor Engine SpeedOther StorageFuel System Engine OILTroubleshooting Warranty Statement

1827SB specifications

The Husqvarna 1827SB is a standout snow blower designed for residential use, equipped with a range of advanced features that make it efficient and user-friendly. This compact yet powerful snow blower is ideal for clearing snow from driveways, sidewalks, and other outdoor areas during the winter months.

One of its main features is the powerful 208cc engine. This engine provides impressive performance, allowing the Husqvarna 1827SB to tackle heavy snowfall with ease. The reliable starter system ensures quick engine ignition, even in cold weather, allowing users to get started without hassle.

The Husqvarna 1827SB is equipped with a 27-inch clearing width, making it capable of covering large areas quickly. The steel auger and impeller work together to break up and efficiently throw snow, with an impressive throwing distance of up to 33 feet. This ensures that snow is not only cleared effectively but also dispersed far from the clearing area, reducing the need for additional shoveling.

Versatility is enhanced with the incorporation of multiple speed options. The Husqvarna 1827SB features six forward and two reverse speeds, enabling operators to adjust the speed according to their comfort and the snow conditions. The large, oversized tires provide excellent traction and stability, making it easy to maneuver through deep snowdrifts.

User convenience is further highlighted in the design of the controls. The ergonomically designed handlebar is adjustable, allowing users to find the optimal height for increased comfort during operation. Moreover, the control panel is intuitively laid out, providing easy access to essential functions such as chute direction and speed adjustments, even while wearing gloves.

The Husqvarna 1827SB also boasts an optional heated handgrip feature, which adds an extra layer of comfort during extended use in frigid temperatures. Additionally, its heavy-duty, durable construction ensures that it can withstand harsh winter conditions and provide reliable performance year after year.

In summary, the Husqvarna 1827SB is a robust, efficient snow blower equipped with a powerful engine, versatile speed options, and user-friendly features. Its combination of durability, performance, and comfort make it a top choice for homeowners looking to keep their pathways clear during winter storms.
Top Page Image Contents