Husqvarna 1827SB manual Meets A.N.S.I. Safety Requirements

Page 8

OPERATION

MUFFLER

GASOLINE

FILLER CAP

CHOKE

CON-

TROL

SAFETY

IGNITION

KEY

ON / OFF

SWITCH

PRIMER

FUEL SHUT-OFF VALVE

RECOIL (AUXILIARY) STARTER HANDLE

NOTE: ITEMS ABOVE

ARE SHOWN IN

THEIR TYPICAL

LOCATION ON THE

ENGINE. ACTUAL

LOCATION MAY VARY

WITH THE ENGINE

ON YOUR UNIT.

AUGERS

ELECTRIC

START AUGER

BUTTON CONTROL

LEVER

POWER

CORD

PLUG

CHUTE

DEFLECTOR

DISCHARGE

CHUTE

CLEAN-OUT TOOL

FIG. 8

DISCHARGE CHUTE CONTROL LEVER

DRIVE SPEED

TRACTION

CONTROL LEVER

DRIVE

 

CONTROL

 

LEVER

LIGHT

CHUTE

DEFLECTOR

KNOB

HANDLE

KNOB

MUFFLER

TOOLBOX

SKID PLATE

MEETS A.N.S.I. SAFETY REQUIREMENTS

Our snow throwers conform to the standards of the American National Standards Institute.

Toolbox - used to store spare shear bolts, locknuts and wrench.

Safety ignition key - must be inserted for the engine to start and run. Remove when snow thrower is not in use.

Electric start button – used for starting the engine.

Recoil (auxiliary) starter handle – used for starting the engine.

Primer - pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine.

Choke control - used for starting a cold engine.

ON / OFF switch - used to STOP the engine.

Drive speed control lever - used to select forward or reverse motion and speed of snow thrower.

Traction drive control lever - used to engage power-pro- pelled forward or reverse motion of snow thrower.

Auger control lever - used to engage auger motion (throw snow).

Discharge chute control lever - used to change the di- rection the snow is thrown.

Skid plate - used to adjust height of scraper bar from the

8 ground.

Image 8
Contents 1827SB Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerParts Packed Separately in Carton Remove Snow Thrower from CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Operation Know Your Snow ThrowerPrimer Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingTo USE Fuel SHUT-OFF Valve See Fig To USE Choke Control See FigTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig To Adjust Skid Plates See Fig Before Starting the EngineScraper BAR See Fig Check Engine OIL Level See FigSnow Throwing Tips To Start EngineBefore Stopping If Recoil Starter has FrozenMaintenance General RecommendationsBefore Each USE LubricationCleaning EngineService and Adjustments To Adjust Snow Thrower HeightShear Bolts See Fig To Remove Belt Cover See FigTo Replace Belts See Fig To Adjust Cable Tension See Fig To Remove Wheels See FigCarburetor Engine SpeedStorage OtherFuel System Engine OILTroubleshooting Warranty Statement

1827SB specifications

The Husqvarna 1827SB is a standout snow blower designed for residential use, equipped with a range of advanced features that make it efficient and user-friendly. This compact yet powerful snow blower is ideal for clearing snow from driveways, sidewalks, and other outdoor areas during the winter months.

One of its main features is the powerful 208cc engine. This engine provides impressive performance, allowing the Husqvarna 1827SB to tackle heavy snowfall with ease. The reliable starter system ensures quick engine ignition, even in cold weather, allowing users to get started without hassle.

The Husqvarna 1827SB is equipped with a 27-inch clearing width, making it capable of covering large areas quickly. The steel auger and impeller work together to break up and efficiently throw snow, with an impressive throwing distance of up to 33 feet. This ensures that snow is not only cleared effectively but also dispersed far from the clearing area, reducing the need for additional shoveling.

Versatility is enhanced with the incorporation of multiple speed options. The Husqvarna 1827SB features six forward and two reverse speeds, enabling operators to adjust the speed according to their comfort and the snow conditions. The large, oversized tires provide excellent traction and stability, making it easy to maneuver through deep snowdrifts.

User convenience is further highlighted in the design of the controls. The ergonomically designed handlebar is adjustable, allowing users to find the optimal height for increased comfort during operation. Moreover, the control panel is intuitively laid out, providing easy access to essential functions such as chute direction and speed adjustments, even while wearing gloves.

The Husqvarna 1827SB also boasts an optional heated handgrip feature, which adds an extra layer of comfort during extended use in frigid temperatures. Additionally, its heavy-duty, durable construction ensures that it can withstand harsh winter conditions and provide reliable performance year after year.

In summary, the Husqvarna 1827SB is a robust, efficient snow blower equipped with a powerful engine, versatile speed options, and user-friendly features. Its combination of durability, performance, and comfort make it a top choice for homeowners looking to keep their pathways clear during winter storms.