Husqvarna 1827SB Parts Packed Separately in Carton, Assembly / PRE-OPERATION, Tool BOX See Fig

Page 4

PARTS PACKED SEPARATELY IN CARTON

(1) AUGER CONTROL ROD

(1) MULTI-

WRENCH

(180684)

(2) FLAT WASHERS

 

(1) POWER CORD

 

(1) DISCHARGE CHUTE

(198563)

(3) RETAINER

 

 

 

 

 

SPRINGS

 

 

(169675)

ROTATOR HEAD MOUNTING

(2) CARRIAGE BOLTS 3/8-16 x 2.25

(1) WASHER 3/8

(1) LOCKNUT 3/8

(1) SAFTEY IGNITION KEY

(422663)

(19131316)

(73800600)

 

(2) HANDLE KNOBS

EXTRA SHEAR BOLTS AND NUTS

(6) SHEAR BOLTS 1/4-20 x 1-3/4

(6) LOCKNUTS

(192090)

1/4-20

 

(73800400)

ASSEMBLY / PRE-OPERATION

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower. Reading the entire manual will familiar- ize you with the unit, which will assist you in assembly, operation and maintenance of the product.

Your new snow thrower has been assembled at the factory with the exception of those parts left unassembled for ship- ping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your snow thrower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

REMOVE SNOW THROWER FROM CARTON

1. Remove all accessible loose parts and parts boxes

 

from carton.

4

 

2.Cut down all four corners of carton and lay panels flat.

3.Remove the two (2) screws securing the auger housing to the pallet.

4.Remove all packing materials except plastic tie holding speed control rod to lower handle.

5.Remove the two (2) plastic ties securing the upper handle to the pallet.

6.Remove snow thrower from carton and check carton thoroughly for additional loose parts.

HOW TO SET UP YOUR SNOW THROWER

TOOL BOX (See Fig. 10)

A toolbox is provided on your snow thrower. The toolbox is located on top of the belt cover. Store the extra shear bolts, nuts and multi-wrench provided in parts bag in the toolbox.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 1827SB Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerParts Packed Separately in Carton Remove Snow Thrower from CartonInstall Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Operation Know Your Snow ThrowerPrimer Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingTo USE Fuel SHUT-OFF Valve See Fig To USE Choke Control See FigTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig To Adjust Skid Plates See Fig Before Starting the EngineScraper BAR See Fig Check Engine OIL Level See FigSnow Throwing Tips To Start EngineBefore Stopping If Recoil Starter has FrozenMaintenance General RecommendationsBefore Each USE LubricationCleaning EngineService and Adjustments To Adjust Snow Thrower HeightShear Bolts See Fig To Remove Belt Cover See FigTo Replace Belts See Fig To Adjust Cable Tension See Fig To Remove Wheels See FigCarburetor Engine SpeedStorage OtherFuel System Engine OILTroubleshooting Warranty Statement

1827SB specifications

The Husqvarna 1827SB is a standout snow blower designed for residential use, equipped with a range of advanced features that make it efficient and user-friendly. This compact yet powerful snow blower is ideal for clearing snow from driveways, sidewalks, and other outdoor areas during the winter months.

One of its main features is the powerful 208cc engine. This engine provides impressive performance, allowing the Husqvarna 1827SB to tackle heavy snowfall with ease. The reliable starter system ensures quick engine ignition, even in cold weather, allowing users to get started without hassle.

The Husqvarna 1827SB is equipped with a 27-inch clearing width, making it capable of covering large areas quickly. The steel auger and impeller work together to break up and efficiently throw snow, with an impressive throwing distance of up to 33 feet. This ensures that snow is not only cleared effectively but also dispersed far from the clearing area, reducing the need for additional shoveling.

Versatility is enhanced with the incorporation of multiple speed options. The Husqvarna 1827SB features six forward and two reverse speeds, enabling operators to adjust the speed according to their comfort and the snow conditions. The large, oversized tires provide excellent traction and stability, making it easy to maneuver through deep snowdrifts.

User convenience is further highlighted in the design of the controls. The ergonomically designed handlebar is adjustable, allowing users to find the optimal height for increased comfort during operation. Moreover, the control panel is intuitively laid out, providing easy access to essential functions such as chute direction and speed adjustments, even while wearing gloves.

The Husqvarna 1827SB also boasts an optional heated handgrip feature, which adds an extra layer of comfort during extended use in frigid temperatures. Additionally, its heavy-duty, durable construction ensures that it can withstand harsh winter conditions and provide reliable performance year after year.

In summary, the Husqvarna 1827SB is a robust, efficient snow blower equipped with a powerful engine, versatile speed options, and user-friendly features. Its combination of durability, performance, and comfort make it a top choice for homeowners looking to keep their pathways clear during winter storms.
Top Page Image Contents