Husqvarna 96193005400, 1830HV manual Meets A.N.S.I. Safety Requirements

Page 9

OPERATION

MUFFLER

GASOLINE

FILLER CAP

CHOKE

CON-

TROL

SAFETY

IGNITION

KEY

ON / OFF

SWITCH

PRIMER

FUEL SHUT-OFF VALVE

RECOIL (AUXILIARY) STARTER HANDLE

NOTE: ITEMS ABOVE

ARE SHOWN IN

THEIR TYPICAL

LOCATION ON THE

ENGINE. ACTUAL

LOCATION MAY VARY

WITH THE ENGINE

ON YOUR UNIT.

AUGERS

ELECTRIC

START

BUTTON

POWER

CORD

PLUG

DISCHARGE

CHUTE

CLEAN-OUT TOOL

FIG. 10

 

DISCHARGE CHUTE CONTROL LEVER

AUGER

 

DEFLECTOR

TRACTION

CONTROL

DRIVE SPEED

REMOTE

DRIVE

CONTROL

LEVER

CONTROL

CONTROL LEVER

LEVER

 

LEVER

 

 

 

CHUTE

 

 

 

DEFLECTOR

 

 

 

LH TURN

TRIGGER

LIGHT

HANDLE

KNOB

MUFFLER

TOOLBOX

SKID PLATE

MEETS A.N.S.I. SAFETY REQUIREMENTS

Our snow throwers conform to the standards of the American National Standards Institute.

Toolbox - used to store spare shear bolts, locknuts and wrench.

Safety ignition key - must be inserted for the engine to start and run. Remove when snow thrower is not in use.

Electric start button – used for starting the engine.

Recoil (auxiliary) starter handle – used for starting the engine.

Primer - pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine.

ON / OFF switch - used to STOP the engine. Choke control - used for starting a cold engine.

Drive speed control lever - used to select forward or reverse motion and speed of snow thrower.

Traction drive control lever - used to engage power- propelled forward or reverse motion of snow thrower.

LH and RH turn triggers - used to steer the snow thrower.

Auger control lever - used to engage auger motion (throw snow).

Discharge chute control lever - used to change the di- rection the snow is thrown.

Skid plate - used to adjust height of scraper bar from the ground.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 1830HV Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONParts Packed Separately in Carton Remove Snow Thrower from CartonInstall Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotater Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Install Chute Deflector Remote Control See FigsKnow Your Snow Thrower OperationPrimer TractionRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerPower Steering Operation See Fig Using the CLEAN-OUT Tool See FigRelease the auger control lever and shut off the engine To Move Forward and Backward See FigBefore Starting the Engine To Adjust Skid Plates See FigScraper BAR See Fig Check Engine OIL Level See FigTo Start Engine Snow Throwing TipsBefore Stopping If Recoil Starter has FrozenGeneral Recommendations MaintenanceBefore Each USE LubricationEngine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Shear Bolts See FigTo Replace Belts See Fig To Remove Wheels See Fig To Adjust Cable Tension See FigRemove the klik pin and remove wheel from axle CarburetorOther StorageFuel System Engine OILTroubleshooting Limitations and Exclusions HOW to Obtain Service Consumer Wheeled Warranty Chart 532 43 54-80 05.20.10 TH See Separate Engine Manufacturers or Manufacturers warranty

96193005400, 1830HV specifications

The Husqvarna 1830HV, model number 96193005400, is a powerful and versatile snow blower designed for homeowners who need to tackle heavy snowfalls efficiently. This machine is engineered with advanced features that make snow removal a breeze, ensuring your driveway and pathways are clear throughout the winter season.

One of the standout features of the Husqvarna 1830HV is its robust 369cc engine. This engine is designed for high performance, delivering the necessary power to handle thick, heavy snow. The electric start function enhances user convenience, allowing for easier ignition in cold weather conditions. With a clearing width of 30 inches, this snow blower can clear a substantial amount of snow with each pass, making it suitable for larger driveways and sidewalks.

The Husqvarna 1830HV boasts a unique Hydrostatic transmission that provides smooth and effective operation. This feature allows the operator to adjust the speed easily, giving them greater control over the snow clearing process. Additionally, the dual-stage system employs an auger and impeller design, ensuring efficient snow intake and throwing capability, capable of launching snow up to 50 feet away.

Another impressive characteristic is the adjustable drift cutters, which help to manage high snow drifts effectively. The machine also features remote chute rotation and deflection, allowing users to easily direct the expelled snow exactly where it’s needed, without stopping or leaving the operator's position.

User comfort is a priority in the design of the Husqvarna 1830HV. The ergonomically designed controls make it easy to operate, even in gloves, while the heated grips provide warmth during the coldest conditions. The LED headlights enhance visibility during early mornings or evenings, ensuring users can work safely and effectively at any hour.

Durability is guaranteed with the rugged construction of the Husqvarna 1830HV. Built with high-quality materials, it’s designed to withstand harsh winter conditions, making it a reliable choice for homeowners looking for a snow blower that can last through the seasons. In summary, the Husqvarna 1830HV, 96193005400 is an outstanding snow blower, combining power, efficiency, and user-friendly design to tackle winter challenges with ease.
Top Page Image Contents