Husqvarna 1130 SBEXP owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 11

OPERATION

TO THROW SNOW (See Fig. 15)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 15

USING THE CLEAN-OUT TOOL (See Fig. 16)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the auger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to pre- vent accidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING CLIP

TO MOVE FORWARD AND BACKWARD (See Fig. 17)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 17

POWER STEERING OPERATION (See Fig. 18)

Steering triggers are used to assist in steering your snow thrower. The triggers are located on the underside of each handle. When a trigger is squeezed, it disengages the drive wheel on that side of snow thrower and allows it to turn in that direction.

•To turn left – squeeze left side trigger.

•To turn right – squeeze right side trigger.

LH TURN

RH TURN

TRIGGER

TRIGGER

FIG. 16

11

FIG. 18

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 1130SBEXP Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotater Head See FigInstall Chute Deflector Remote Control See Figs Ignition KEY OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Throw Snow See FigScraper BAR Before Starting the EngineIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingBefore Each USE Maintenance➀ SAE 30 Motor Oil ➁ See Engine in Maintenance section General RecommendationsEngine CleaningSnow Thrower Shear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Repair Parts 532 17 KEY Part DescriptionControl Panel / Discharge Chute KEY Part Description Handles Repair Parts Drive Repair Parts Chassis / Engine / Pulleys KEY Part Description Repair Parts Wheels / Decals 532 40 Wheels / DecalsSion Tmita ILD NA SON ITP Eexc 4ON ITC ES Rantywar Tementsta

1130 SBEXP specifications

The Husqvarna 1130 SBEXP is a powerful snow blower designed to tackle the challenges posed by heavy snowfall and icy conditions. With its robust construction and advanced features, it stands out as a reliable tool for both residential and commercial use.

One of the most notable features of the Husqvarna 1130 SBEXP is its impressive clearing width of 30 inches, allowing users to clear a large path quickly and efficiently. The high-performance 291cc Husqvarna engine delivers reliable power, ensuring optimal performance in even the most challenging winter conditions. This engine is designed for easy starting and operation, so users can get to work without delays.

The machine boasts a durable steel auger that not only breaks up packed snow but also effectively removes it from the surface. With the ability to throw snow up to 40 feet away, the Husqvarna 1130 SBEXP ensures that you can clear driveways, sidewalks, and patios without worrying about where the snow will land. The auger design also reduces clogging, ensuring uninterrupted performance during use.

Equipped with the innovative Hydrostatic transmission, the Husqvarna 1130 SBEXP offers smooth speed control, allowing the operator to adjust the pace according to the terrain or snow conditions. This feature adds to the machine’s versatility and user-friendliness, making it suitable for various applications.

Another highlight of this snow blower is its adjustable chute and deflector. This allows users to direct the snow exactly where they want it to go, enhancing maneuverability and effectiveness. The chute rotation can be easily controlled from the operator's position, giving you full command while clearing snow.

For added convenience, the Husqvarna 1130 SBEXP features LED headlights, ensuring visibility during early morning or late evening snow clearing. The model also includes heated handle grips for comfort, minimizing fatigue during prolonged use in cold weather.

With rugged tires designed for maximum traction and stability, the Husqvarna 1130 SBEXP excels on uneven surfaces, making it a reliable choice for any winter landscape. Its combination of power, convenience, and innovative technology positions the Husqvarna 1130 SBEXP as a leading choice in the snow blower category, ensuring that you can efficiently manage winter’s challenges while keeping your exterior spaces safe and accessible.
Top Page Image Contents