Husqvarna 1130 SBEXP owner manual Troubleshooting

Page 19

TROUBLESHOOTING

See appropriate section in manual unless directed to a qualified service center.

PROBLEM

 

CAUSE

 

CORRECTION

Does not start

1.

Fuel shut-off valve (if so

1.

Turn fuel shut-off valve to OPEN position.

 

 

equipped) in OFF position.

 

 

 

2.

Safety ignition key

2.

Insert safety ignition key.

 

 

is not inserted.

 

 

 

3.

Out of fuel.

3.

Fill fuel tank.

 

4.

Throttle in STOP position.

4.

Move throttle to FAST position.

 

5.

Choke in OFF position.

5.

Move to FULL position.

 

6.

Primer not depressed.

6.

Prime as instructed in the Operation section of this manual.

 

7.

Engine is flooded.

7.

Wait a few minutes before restarting, DO NOT prime.

 

8.

Spark plug wire is

8.

Connect wire to spark plug.

 

 

disconnected.

 

 

 

9.

Bad spark plug.

9.

Replace spark plug.

 

10.

Stale fuel.

10.

Drain fuel tank and carburetor, refill tank with fresh gasoline.

 

11.

Water in fuel.

11.

Drain fuel tank and carburetor, refill tank with fresh gasoline.

 

 

 

 

 

Loss of power

1.

Spark plug wire loose.

1.

Reconnect spark plug wire.

 

2.

Throwing too much snow.

2.

Reduce speed and width of swath.

 

3.

Fuel tank cap is covered

3.

Remove ice and snow on and around fuel tank cap.

 

 

with ice or snow.

 

 

 

4.

Dirty or clogged muffler.

4.

Clean or replace muffler.

 

 

 

 

 

Engine idles or

1.

Choke is in FULL position.

1.

Move choke to OFF position.

runs roughly

2.

Blockage in fuel line.

2.

Clean fuel line.

 

3.

Stale fuel.

3.

Drain tank and refill with fresh, clean fuel.

 

4.

Water in fuel.

4.

Drain fuel tank and carburetor, refill tank with fresh gasoline.

 

5.

Carburetor is in need of

5.

Contact a qualified service center.

 

 

adjustment or overhaul.

 

 

 

 

 

 

 

Excessive

1.

Loose parts or damaged

1.

Tighten all fasteners. Replace damaged parts.

vibration

 

augers or impeller.

 

If vibration remains, contact a qualified service center.

 

 

 

 

 

Recoil starter

1.

Frozen recoil starter.

1.

See “IF RECOIL STARTER HAS FROZEN”

is hard to pull

 

 

 

in the Operation section of this manual.

 

 

 

 

 

Loss of traction

1.

Drive belt is worn.

1.

Check / replace drive belt.

drive / slowing

2.

Drive belt is off of pulley.

2.

Check / reinstall drive belt.

of drive speed

3.

Friction drive wheel is worn.

3.

Contact a qualified service center.

 

 

 

 

 

Loss of snow

1.

Auger belt is off of pulley.

1.

Check / reinstall auger belt.

discharge or

2.

Auger belt is worn.

2.

Check / replace auger belt.

slowing of

3.

Clogged discharge chute.

3.

Clean snow chute.

snow discharge

4.

Augers / impeller jammed.

4.

Remove debris or foreign object from augers / impeller.

 

 

 

 

 

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 1130SBEXP Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Throw Snow See FigScraper BAR Before Starting the EngineIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingBefore Each USE Maintenance➀ SAE 30 Motor Oil ➁ See Engine in Maintenance section General RecommendationsSnow Thrower CleaningEngine Shear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Repair Parts 532 17 KEY Part DescriptionControl Panel / Discharge Chute KEY Part Description Handles Repair Parts Drive Repair Parts Chassis / Engine / Pulleys KEY Part Description Repair Parts Wheels / Decals 532 40 Wheels / DecalsSion Tmita ILD NA SON ITP Eexc 4ON ITC ES Rantywar Tementsta

1130 SBEXP specifications

The Husqvarna 1130 SBEXP is a powerful snow blower designed to tackle the challenges posed by heavy snowfall and icy conditions. With its robust construction and advanced features, it stands out as a reliable tool for both residential and commercial use.

One of the most notable features of the Husqvarna 1130 SBEXP is its impressive clearing width of 30 inches, allowing users to clear a large path quickly and efficiently. The high-performance 291cc Husqvarna engine delivers reliable power, ensuring optimal performance in even the most challenging winter conditions. This engine is designed for easy starting and operation, so users can get to work without delays.

The machine boasts a durable steel auger that not only breaks up packed snow but also effectively removes it from the surface. With the ability to throw snow up to 40 feet away, the Husqvarna 1130 SBEXP ensures that you can clear driveways, sidewalks, and patios without worrying about where the snow will land. The auger design also reduces clogging, ensuring uninterrupted performance during use.

Equipped with the innovative Hydrostatic transmission, the Husqvarna 1130 SBEXP offers smooth speed control, allowing the operator to adjust the pace according to the terrain or snow conditions. This feature adds to the machine’s versatility and user-friendliness, making it suitable for various applications.

Another highlight of this snow blower is its adjustable chute and deflector. This allows users to direct the snow exactly where they want it to go, enhancing maneuverability and effectiveness. The chute rotation can be easily controlled from the operator's position, giving you full command while clearing snow.

For added convenience, the Husqvarna 1130 SBEXP features LED headlights, ensuring visibility during early morning or late evening snow clearing. The model also includes heated handle grips for comfort, minimizing fatigue during prolonged use in cold weather.

With rugged tires designed for maximum traction and stability, the Husqvarna 1130 SBEXP excels on uneven surfaces, making it a reliable choice for any winter landscape. Its combination of power, convenience, and innovative technology positions the Husqvarna 1130 SBEXP as a leading choice in the snow blower category, ensuring that you can efficiently manage winter’s challenges while keeping your exterior spaces safe and accessible.
Top Page Image Contents