McCulloch 96188000400 owner manual Operating Tips, Maintenance

Page 11

Operating Tips

The auger blades can throw stones, toys, and other foreign objects and cause serious personal injury to the operator or to bystanders.

Keep the area to be cleared free of all objects that the auger blades could pick up and throw.

Keep all children and pets away from the area of operation.

Do not operate snow thrower if weather condi- tions impair visibility. Throwing snow during a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the snow thrower.

The best time to remove snow is the early morning. At this time the snow is usually dry and has not been exposed to the direct sun and warming temperatures.

Slightly overlap each successive path to ensure all snow will be removed.

Throw snow downwind whenever possible.

For extremely heavy snow, reduce the width of snow removal by overlapping previous path and moving slowly.

Keep engine clean and clear of snow during use. This will help air flow and extend engine life.

After snow-throwing is completed, allow engine to run for a few minutes to melt snow and ice off the engine.

Clean the entire snow thrower thoroughly after each use and wipe dry so it is ready for next use.

Maintenance

NOTE: Determine the left and right sides of the machine from the normal operating position.

11

Image 11
Contents MC621ES Safe Operation Practices for Walk-Behind Snow Throwers Come ALERT!!! Your Safety is InvolvedF6RTC Shut the Engine OFFAPI SG-SL Table of Contents Unfolding the Handle SetupInstalling the Discharge Chute Lubrication Filling the Engine with Oil Product OverviewChecking the Engine Oil Level OperationFilling the Fuel Tank Starting the Engine Disengaging the Auger Blades Engaging the Auger BladesPreventing Freeze-up after Use Adjusting the Discharge Chute and Chute DeflectorStopping the Engine Clearing a Clogged Discharge ChuteOperating Tips MaintenanceInspecting the Auger Blades Adjusting the Control CableChanging the Engine Oil Servicing the Spark Plug Replacing the Drive Belt Cylinder Storage Storing the SnowthrowerFuel System Engine OILDoes not start TroubleshootingSSST-Chute asm5 KEY Part QTY Description KNOB.HANDLE.BLACK BAIL.HANDLE.PAINT.MS431HANDLE.PNT.UPPER.SSST CONTROL.CABLEPLATE.CENTER.BLADE 13 HEX.NUT.1/4-20 Nylon Locking KEY Part NO. noQTY Description BOLT.CARRIAGESSST-Shroud asm8 TOP.COVER KEY HousingCOVER.NON-DRIVE.SIDE.MS428 COVER.DRIVE.SIDE.MS428SSST-Frame asm3 NUT.PUSH.AXLE.0.5IN LCT.ENGINEFRAME.WELDMENT WHEEL.8X1.5.BRICK.GS.3SPK.MS421WASHER.HARDEN SPACER.ENGINE.CRANKKEEPER.ENGINE.BELT PULLEY.ENG.TRACTION.3/4Service Notes Repair Parts Snow Thrower - Model Number MC621ES ENGINE, LCT KEY Part Description Limited Warranty