5.Remove iEQ center stud and alignment peg. Insert the MiniTower Securing Bolt through the hole on the top mounting flange. Install the Turning Lever.
6. Put the MiniPier body onto the Base Flange and secure it using three locking screws.
7.Final adjust the tripod height and level the tripod with MiniPier before mounting the MiniTower mount.
8.Install 3 MiniTower level adjustment screws and threaded in about half of the threads. Put the MiniTower on to it. Level it. Thread the MiniTower Securing Bolt into the MiniTower and tighten it. Make sure the mount is leveled while rotating the mount.