Motorola PTP 100 (FSK) Configuring Your Radius Server for Device Access Tracking, Procedures

Page 23

Release 11.0

Release Notes and User Guide Supplement

Note, remote access control is enabled only after the SM registers to an AP that has Authentication Mode set to RADIUS AAA. Local access control will always be used before registration and will be used after registration if the AP is not configured for RADIUS.

Figure 6: SM's Account > User Authentication tab

5.6.3Access Tracking

To track logon and logoff times on individual radios by technicians, installers, and administrators, on the AP or SM’s Account > User Authentication and Accounting tab under Accounting (Access Tracking) choose Enabled.

Device Access Tracking is enabled separately from User Authentication Mode. A given AP or SM can be configured for both, either, or neither.

Device Access Tracking does not track and report specific configuration actions performed on radios or pull statistics such as bit counts from the radios. Such functions require an Element Management System (EMS) such as the Motorola One Point Wireless Manager.

5.7CONFIGURING YOUR RADIUS SERVER FOR DEVICE ACCESS TRACKING

The VSA needed for device access tracking and the associated values are shown in Table 2 on page 19.

5.8PROCEDURES

5.8.1Configuring a basic system

For a basic system:

On the SM’s Configuration -->Security tab:

oLock AAA: Disabled

oPhase 1: EAPTTLS (can't be changed)

Issue 1, March 2011

Page 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Software Release Release Notes and User Guide Supplement Trademarks, Product Names, and Service Names Table of Contents Regulatory and Legal Notices List of TablesList of Figures Abbreviations IntroductionRelease 11.0 Overview Document Change HistoryP7/P8/P9/P10/P11 Hardware Series Feedback on DocumentationTechnical Support Latin and Central America PhoneCanada Asia and Pacific Europe, Middle East, and AfricaModulation PMP Radio Series PTP Radio Series Module Type ApplicabilityUpgrading to Release Obtaining Cnut Upgrade PackagesSM Receive Target Level can now be FeaturesRelease 11.0 Features See for Regions Products Feature DescriptionAffected Details Radius Functions Radius for PMPRadius Implementation Overview Tested Radius Servers Configuring AP and SM for Radius SM AuthenticationDisabled Authentication Server BAMAPs Configuration Security tab SM Authentication Mode Require Radius or Follow APSM Phase 2 Inside Identity parameters and settings SM Phase 1 Outside Identity parameters and settingsCertificate management on SMs Handling CertificatesUsing Cnut to distribute certificates to SMs Configuring Your Radius Server for SM AuthenticationName Number Type Configuring Your Radius Server for SM ConfigurationValue SM GUI Page Tab Parameter Default Size Canopy Radius Vendor Specific Attributes VSAsMotorola-Canopy-VLLEARNNEN Motorola-Canopy-ULBLMotorola-Canopy-DLBR Motorola-Canopy-DLBLAP Technician/Installer/Administrator Authentication APs Account User Authentication tab SM Technician/Installer/Administrator AuthenticationConfiguring a basic system Configuring Your Radius Server for Device Access TrackingProcedures Access TrackingPage Products Issue Discussion Affected Resolved IssuesImprovements and issues resolved in Release Release 11.0 known open issues Known Open IssuesProducts Description Discussion and Recommendations Affected BAM 169.254/16 SM IP address space to access DNS services Test with MIR Region Code asPMP AP and PTP BH Region Code Set to United States US Region Code OperationOfdm GHz Ofdm PMP & PTP U.S. Region Code operationGHz FSK PMP & PTP U.S. Region Code operation PMP 430 Center ChannelsPMP 430 center channels by channel bandwidth and region code GHz Region Code PMP 100 Series DFS Operation Based on Region CodePMP 100 AP/SM DFS operation based on region code Region GHz Code1 PTP 100 Series DFS Operation Based on Region CodePTP 100 backhaul operation based on region code Region Code Frequency Radio Platform PMP 400/430 and PTP 200 DFS Operation Based on Region CodePMP 400/430 and PTP 200 DFS operation based on region code Canopy MIB System Performance and System Constraints Performance Benchmarking ProcessDefinitions Smaller Packets PMP 430 5.4 and 5.8-GHz Ofdm with 10MHz ChannelsPMP 430 5.4 and 5.8-GHz Ofdm with 20MHz Channels Benchmark Definition Pps National and Regional Regulatory Notices Regulatory and Legal NoticesImportant Note on Modifications FCC ID ABZ89FC5804 Within MHz ISM band MHz channels Centered on Industry Canada IC Notification Release Release Notes and User Guide Supplement UK Notification European Union Notification for 5.7 and 5.8 GHz ProductEquipment Disposal EU Declaration of Conformity for RoHS Compliance11.2.11Norway Notification Belgium NotificationLuxembourg Notification 11.2.10Czech Republic NotificationChina disclosure table 11.2.13Australia Notification11.2.14Labeling and Disclosure Table for China Module Type Separation Distance from Persons RF Exposure Separation DistancesExposure separation distances # S Calculated exposure distances and power compliance marginsSoftware License Terms and Conditions Legal NoticesRelease Release Notes and User Guide Supplement Limit of Liability Hardware Warranty in US

PTP 100 (FSK), PMP 400, PTP 200 (OFDM, PMP 100 specifications

Motorola has long been a key player in the wireless communications market, known for its innovative solutions that cater to various connectivity needs. Among its diverse product range, the Motorola PMP 100 and PTP 200 series stand out as robust solutions for both point-to-multipoint (PMP) and point-to-point (PTP) applications, utilizing advanced modulation technologies such as OFDM (Orthogonal Frequency-Division Multiplexing) and FSK (Frequency Shift Keying).

The Motorola PMP 100 series is designed for wireless broadband access, enabling operators to provide high-speed internet connectivity to rural and underserved areas. Its capability to support multiple users makes it an ideal choice for ISPs looking to deliver last-mile connectivity. The PMP 100 operates in the 2.4 GHz and 5.7 GHz frequency bands, ensuring flexibility and compliance with various regulatory requirements. One of its key features is the use of OFDM technology, which enhances spectral efficiency and minimizes interference, resulting in reliable data transmission even in challenging environments.

On the other hand, the PTP 200 series focuses on point-to-point communication, offering high-capacity backhaul links between two locations. The PTP 200 is optimized for performance in line-of-sight scenarios, featuring advanced antenna options and narrow beam width capabilities. This product also leverages OFDM technology, which provides increased data rates and improved capacity, supporting applications such as video surveillance, voice over IP, and enterprise connectivity.

In addition to the PMP and PTP 200 series, Motorola also offers the PMP 400 and PTP 100, which utilize FSK modulation. The PMP 400 series further advances the capabilities of wireless broadband access, featuring enhanced error correction, allowing for better performance in adverse conditions. This series is particularly well-suited for environments with high noise levels, making it a reliable choice for industrial applications. The PTP 100 series, on the other hand, operates effectively in point-to-point scenarios with lower bandwidth requirements, ensuring cost-effective solutions for dedicated leased line services.

In summary, the Motorola PMP and PTP series represent a comprehensive suite of wireless communication solutions, utilizing advanced modulation technologies like OFDM and FSK to deliver high-speed, reliable connectivity. These products demonstrate Motorola's commitment to innovation, addressing the diverse needs of users ranging from ISPs to enterprise customers, all while ensuring robust performance and ease of deployment in various environments.
Top Page Image Contents