Motorola PMP 100, PMP 400, PTP 200 (OFDM manual Release Release Notes and User Guide Supplement

Page 48

Release 11.0

Release Notes and User Guide Supplement

For 4.9-GHz devices:

The 4.9-GHz band is a licensed band allocated to public safety services. Government entities that provide public safety services are eligible to apply for 4.9 GHz licenses. For additional information, refer to Industry Canada regulations.

11.2.3 Regulatory Requirement for CEPT Member States (www.cept.org)

When operated in accordance with the instructions for use, Motorola Canopy Wireless equipment operating in the 2.4 and 5.4 GHz bands is compliant with CEPT Recommendation 70-03 Annex 3 for Wideband Data Transmission and HIPERLANs. For compliant operation in the 2.4 GHz band, the transmit power (EIRP) from the built-in patch antenna and any associated reflector dish shall be no more than 100mW (20dBm). For compliant operation in the 5.4 GHz band, the transmit power (EIRP) from the built-in patch antenna and any associated reflector dish shall be no more than 1 W (30 dBm).

The following countries have completely implemented CEPT Recommendation 70-03 Annex 3A (2.4 GHz band):

EU & EFTA countries: Austria, Belgium, Denmark, Spain, Finland, Germany, Greece, Iceland, Italy, Ireland, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Switzerland, Sweden, UK

New EU member states: Bulgaria, Czech Republic, Cyprus, Estonia, Hungary, Lithuania, Latvia, Malta, Poland, Slovenia, Slovakia

Other non-EU & EFTA countries: Bosnia and Herzegovina, Turkey

The following countries have a limited implementation of CEPT Recommendation 70-03 Annex 3A:

France – Outdoor operation at 100mW is only permitted in the frequency band 2400 to 2454 MHz;

−Any outdoor operation in the band 2454 to 2483.5MHz shall not exceed 10mW (10dBm);

−Indoor operation at 100mW (20dBm) is permitted across the band 2400 to 2483.5 MHz

French Overseas Territories:

−Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte – 100mW indoor & outdoor is allowed

−Réunion and Guyana – 100mW indoor, no operation outdoor in the band 2400 to 2420MHz

Italy – If used outside own premises, general authorization required

Luxembourg - General authorization required for public service

Romania – Individual license required. T/R 22-06 not implemented

Motorola Canopy Radios operating in the 2400 to 2483.5MHz band are categorized as “Class 2” devices

within the EU and are marked with the class identifier symbol , denoting that national restrictions apply (for example, France). The French restriction in the 2.4 GHz band will be removed in 2011.

This 2.4 GHz equipment is “CE” marked to show compliance with the European Radio & Telecommunications Terminal Equipment (R&TTE) directive 1999/5/EC. The relevant Declaration of Conformity can be found at http://motorola.wirelessbroadbandsupport.com/doc.php.

Where necessary, the end user is responsible for obtaining any National licenses required to operate this product and these must be obtained before using the product in any particular country. However, for CEPT member states, 2.4 GHz Wideband Data Transmission equipment has been designated exempt from individual licensing under decision ERC/DEC(01)07. For EU member states, RLAN equipment in both the

2.4& 5.4GHz bands is exempt from individual licensing under Commission Recommendation 2003/203/EC. Contact the appropriate national administrations for details on the conditions of use for the bands in question and any exceptions that might apply. Also see www.ero.dk for further information.

Issue 1, March 2011

Page 48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Software Release Release Notes and User Guide Supplement Trademarks, Product Names, and Service Names Table of Contents List of Tables Regulatory and Legal NoticesList of Figures Introduction Release 11.0 OverviewDocument Change History AbbreviationsFeedback on Documentation Technical SupportP7/P8/P9/P10/P11 Hardware Series Phone Canada Asia and PacificEurope, Middle East, and Africa Latin and Central AmericaApplicability Modulation PMP Radio Series PTP Radio Series Module TypeObtaining Cnut Upgrade Packages Upgrading to ReleaseFeatures Release 11.0 FeaturesSM Receive Target Level can now be Regions Products Feature Description Affected DetailsSee for Radius for PMP Radius Implementation OverviewRadius Functions Configuring AP and SM for Radius SM Authentication DisabledAuthentication Server BAM Tested Radius ServersSM Authentication Mode Require Radius or Follow AP APs Configuration Security tabSM Phase 1 Outside Identity parameters and settings SM Phase 2 Inside Identity parameters and settingsHandling Certificates Certificate management on SMsConfiguring Your Radius Server for SM Authentication Using Cnut to distribute certificates to SMsConfiguring Your Radius Server for SM Configuration Value SM GUI Page Tab Parameter Default SizeCanopy Radius Vendor Specific Attributes VSAs Name Number TypeMotorola-Canopy-ULBL Motorola-Canopy-DLBRMotorola-Canopy-DLBL Motorola-Canopy-VLLEARNNENAP Technician/Installer/Administrator Authentication SM Technician/Installer/Administrator Authentication APs Account User Authentication tabConfiguring Your Radius Server for Device Access Tracking ProceduresAccess Tracking Configuring a basic systemPage Resolved Issues Improvements and issues resolved in ReleaseProducts Issue Discussion Affected Known Open Issues Release 11.0 known open issuesProducts Description Discussion and Recommendations Affected BAM 169.254/16 SM IP address space to access DNS services Region Code as Test with MIRUS Region Code Operation PMP AP and PTP BH Region Code Set to United StatesGHz Ofdm PMP & PTP U.S. Region Code operation OfdmPMP 430 Center Channels GHz FSK PMP & PTP U.S. Region Code operationPMP 430 center channels by channel bandwidth and region code PMP 100 Series DFS Operation Based on Region Code PMP 100 AP/SM DFS operation based on region codeGHz Region Code PTP 100 Series DFS Operation Based on Region Code PTP 100 backhaul operation based on region codeRegion GHz Code1 PMP 400/430 and PTP 200 DFS Operation Based on Region Code PMP 400/430 and PTP 200 DFS operation based on region codeRegion Code Frequency Radio Platform Canopy MIB Performance Benchmarking Process DefinitionsSystem Performance and System Constraints PMP 430 5.4 and 5.8-GHz Ofdm with 10MHz Channels PMP 430 5.4 and 5.8-GHz Ofdm with 20MHz ChannelsSmaller Packets Benchmark Definition Pps Regulatory and Legal Notices Important Note on ModificationsNational and Regional Regulatory Notices FCC ID ABZ89FC5804 Within MHz ISM band MHz channels Centered on Industry Canada IC Notification Release Release Notes and User Guide Supplement European Union Notification for 5.7 and 5.8 GHz Product Equipment DisposalEU Declaration of Conformity for RoHS Compliance UK NotificationBelgium Notification Luxembourg Notification11.2.10Czech Republic Notification 11.2.11Norway Notification11.2.13Australia Notification 11.2.14Labeling and Disclosure Table for ChinaChina disclosure table RF Exposure Separation Distances Exposure separation distancesModule Type Separation Distance from Persons Calculated exposure distances and power compliance margins # SLegal Notices Software License Terms and ConditionsRelease Release Notes and User Guide Supplement Hardware Warranty in US Limit of Liability

PTP 100 (FSK), PMP 400, PTP 200 (OFDM, PMP 100 specifications

Motorola has long been a key player in the wireless communications market, known for its innovative solutions that cater to various connectivity needs. Among its diverse product range, the Motorola PMP 100 and PTP 200 series stand out as robust solutions for both point-to-multipoint (PMP) and point-to-point (PTP) applications, utilizing advanced modulation technologies such as OFDM (Orthogonal Frequency-Division Multiplexing) and FSK (Frequency Shift Keying).

The Motorola PMP 100 series is designed for wireless broadband access, enabling operators to provide high-speed internet connectivity to rural and underserved areas. Its capability to support multiple users makes it an ideal choice for ISPs looking to deliver last-mile connectivity. The PMP 100 operates in the 2.4 GHz and 5.7 GHz frequency bands, ensuring flexibility and compliance with various regulatory requirements. One of its key features is the use of OFDM technology, which enhances spectral efficiency and minimizes interference, resulting in reliable data transmission even in challenging environments.

On the other hand, the PTP 200 series focuses on point-to-point communication, offering high-capacity backhaul links between two locations. The PTP 200 is optimized for performance in line-of-sight scenarios, featuring advanced antenna options and narrow beam width capabilities. This product also leverages OFDM technology, which provides increased data rates and improved capacity, supporting applications such as video surveillance, voice over IP, and enterprise connectivity.

In addition to the PMP and PTP 200 series, Motorola also offers the PMP 400 and PTP 100, which utilize FSK modulation. The PMP 400 series further advances the capabilities of wireless broadband access, featuring enhanced error correction, allowing for better performance in adverse conditions. This series is particularly well-suited for environments with high noise levels, making it a reliable choice for industrial applications. The PTP 100 series, on the other hand, operates effectively in point-to-point scenarios with lower bandwidth requirements, ensuring cost-effective solutions for dedicated leased line services.

In summary, the Motorola PMP and PTP series represent a comprehensive suite of wireless communication solutions, utilizing advanced modulation technologies like OFDM and FSK to deliver high-speed, reliable connectivity. These products demonstrate Motorola's commitment to innovation, addressing the diverse needs of users ranging from ISPs to enterprise customers, all while ensuring robust performance and ease of deployment in various environments.
Top Page Image Contents