Motorola PMP 400, PMP 100, PTP 200 (OFDM 169.254/16 SM IP address space to access DNS services

Page 29

Release 11.0

 

Release Notes and User Guide Supplement

 

Table 8: Notes first discussed with Release 9.5

 

 

 

 

 

Products

Description

 

 

Discussion and Recommendations

Affected

 

 

 

 

All

SM – DNS below

 

Microsoft Vista and Windows 7 will not route a 169.254/16 subnet used as

 

a NATed SM

 

the default Canopy subnet since these operating systems use 169.254/16

 

when DNS Server

 

subnet to talk between local machines. This is not an issue if:

 

Proxy is enabled

 

- the PC is connected directly to the NATed SM.

 

 

 

 

- the NAT/routing CPE underneath the NATed SM provides DNS services.

 

 

 

 

However; if a NAT/routing CPE that is not providing DNS services (e.g.

 

 

 

 

some home routers) is placed between the SM and the user’s PC, a

 

 

 

 

Microsoft Vista or Windows 7 machine will not route to the default

 

 

 

 

169.254/16 SM IP address space to access DNS services.

 

 

 

 

Workaround: Reconfigure the SMs NAT LAN address to a private IP

 

 

 

 

address such as 192.168/16, 172.16/12, or 10/8 or leave DNS Server

 

 

 

 

Proxy disabled.

 

 

 

 

All

Updating

 

To flip-flop the read/write and read-only community string names, it is

 

Community

 

necessary to change one community string to a temp name first before

 

Strings on the

 

switching community string names.

 

Web GUI (11699)

 

 

 

 

 

 

Remote

Remote AP Sync

 

Remote AP receives sync from SM by setting SYNC Input to Timing Port.

AP

Input (7427)

 

However, if this is incorrectly configured as SYNC input to Power port the

 

 

 

 

Remote AP will still correctly receive SYNC.

 

 

 

 

AP

Disable TCP ACK

 

When optimizing a system for broadcast video, on the AP’s Configuration

 

prioritizing in

 

=> General page configure Prioritized TCP ACK to Disabled.

 

broadcast video

 

In a system being used for internet access or similar applications

 

applications

 

prioritizing TCP ACKs improves downloading of FTP files and other

 

(10263)

 

 

 

 

 

activities making significant use of TCP ACKs under heavy load. However,

 

 

 

 

in a system being used for broadcast video or video surveillance,

 

 

 

 

prioritizing TCP ACKs can cause sporadic choppy video in the uplink.

 

 

 

 

AP or SM

Procedures for

 

When the SpectrumAnalysis.xml button is clicked on the SM’s Tools >

 

saving an XML

 

Spectrum Analyzer tab or the AP’s Tools > Remote Spectrum Analyzer

 

file of a spectrum

 

tab, the spectrum graph is redisplayed using XML and XSL if the browser

 

graph (8484)

 

supports XSL. To save the underlying XML file, right click and select “Save

 

 

 

 

Target As” on a Windows PC, or equivalent action for other operating

 

 

 

 

systems.

 

 

 

 

SM

SM scan

 

If you make frequency changes on the SM GUI, and then back them out

 

frequencies not

 

using SNMP, the Reboot Required message remains on the GUI.

 

“cancelled” by

 

Workaround:

 

SNMP actions

 

If it says Reboot Required, go ahead and reboot, just to clear the

 

(8172)

 

 

 

 

 

message.

 

 

 

 

 

 

 

 

 

Issue 1, March 2011

Page 29

Image 29
Contents Software Release Release Notes and User Guide Supplement Trademarks, Product Names, and Service Names Table of Contents Regulatory and Legal Notices List of TablesList of Figures Release 11.0 Overview IntroductionDocument Change History AbbreviationsP7/P8/P9/P10/P11 Hardware Series Feedback on DocumentationTechnical Support Canada Asia and Pacific PhoneEurope, Middle East, and Africa Latin and Central AmericaModulation PMP Radio Series PTP Radio Series Module Type ApplicabilityUpgrading to Release Obtaining Cnut Upgrade PackagesSM Receive Target Level can now be FeaturesRelease 11.0 Features See for Regions Products Feature DescriptionAffected Details Radius Functions Radius for PMPRadius Implementation Overview Disabled Configuring AP and SM for Radius SM AuthenticationAuthentication Server BAM Tested Radius ServersAPs Configuration Security tab SM Authentication Mode Require Radius or Follow APSM Phase 2 Inside Identity parameters and settings SM Phase 1 Outside Identity parameters and settingsCertificate management on SMs Handling CertificatesUsing Cnut to distribute certificates to SMs Configuring Your Radius Server for SM AuthenticationValue SM GUI Page Tab Parameter Default Size Configuring Your Radius Server for SM ConfigurationCanopy Radius Vendor Specific Attributes VSAs Name Number TypeMotorola-Canopy-DLBR Motorola-Canopy-ULBLMotorola-Canopy-DLBL Motorola-Canopy-VLLEARNNENAP Technician/Installer/Administrator Authentication APs Account User Authentication tab SM Technician/Installer/Administrator AuthenticationProcedures Configuring Your Radius Server for Device Access TrackingAccess Tracking Configuring a basic systemPage Products Issue Discussion Affected Resolved IssuesImprovements and issues resolved in Release Release 11.0 known open issues Known Open IssuesProducts Description Discussion and Recommendations Affected BAM 169.254/16 SM IP address space to access DNS services Test with MIR Region Code asPMP AP and PTP BH Region Code Set to United States US Region Code OperationOfdm GHz Ofdm PMP & PTP U.S. Region Code operationGHz FSK PMP & PTP U.S. Region Code operation PMP 430 Center ChannelsPMP 430 center channels by channel bandwidth and region code GHz Region Code PMP 100 Series DFS Operation Based on Region CodePMP 100 AP/SM DFS operation based on region code Region GHz Code1 PTP 100 Series DFS Operation Based on Region CodePTP 100 backhaul operation based on region code Region Code Frequency Radio Platform PMP 400/430 and PTP 200 DFS Operation Based on Region CodePMP 400/430 and PTP 200 DFS operation based on region code Canopy MIB System Performance and System Constraints Performance Benchmarking ProcessDefinitions Smaller Packets PMP 430 5.4 and 5.8-GHz Ofdm with 10MHz ChannelsPMP 430 5.4 and 5.8-GHz Ofdm with 20MHz Channels Benchmark Definition Pps National and Regional Regulatory Notices Regulatory and Legal NoticesImportant Note on Modifications FCC ID ABZ89FC5804 Within MHz ISM band MHz channels Centered on Industry Canada IC Notification Release Release Notes and User Guide Supplement Equipment Disposal European Union Notification for 5.7 and 5.8 GHz ProductEU Declaration of Conformity for RoHS Compliance UK NotificationLuxembourg Notification Belgium Notification11.2.10Czech Republic Notification 11.2.11Norway NotificationChina disclosure table 11.2.13Australia Notification11.2.14Labeling and Disclosure Table for China Module Type Separation Distance from Persons RF Exposure Separation DistancesExposure separation distances # S Calculated exposure distances and power compliance marginsSoftware License Terms and Conditions Legal NoticesRelease Release Notes and User Guide Supplement Limit of Liability Hardware Warranty in US

PTP 100 (FSK), PMP 400, PTP 200 (OFDM, PMP 100 specifications

Motorola has long been a key player in the wireless communications market, known for its innovative solutions that cater to various connectivity needs. Among its diverse product range, the Motorola PMP 100 and PTP 200 series stand out as robust solutions for both point-to-multipoint (PMP) and point-to-point (PTP) applications, utilizing advanced modulation technologies such as OFDM (Orthogonal Frequency-Division Multiplexing) and FSK (Frequency Shift Keying).

The Motorola PMP 100 series is designed for wireless broadband access, enabling operators to provide high-speed internet connectivity to rural and underserved areas. Its capability to support multiple users makes it an ideal choice for ISPs looking to deliver last-mile connectivity. The PMP 100 operates in the 2.4 GHz and 5.7 GHz frequency bands, ensuring flexibility and compliance with various regulatory requirements. One of its key features is the use of OFDM technology, which enhances spectral efficiency and minimizes interference, resulting in reliable data transmission even in challenging environments.

On the other hand, the PTP 200 series focuses on point-to-point communication, offering high-capacity backhaul links between two locations. The PTP 200 is optimized for performance in line-of-sight scenarios, featuring advanced antenna options and narrow beam width capabilities. This product also leverages OFDM technology, which provides increased data rates and improved capacity, supporting applications such as video surveillance, voice over IP, and enterprise connectivity.

In addition to the PMP and PTP 200 series, Motorola also offers the PMP 400 and PTP 100, which utilize FSK modulation. The PMP 400 series further advances the capabilities of wireless broadband access, featuring enhanced error correction, allowing for better performance in adverse conditions. This series is particularly well-suited for environments with high noise levels, making it a reliable choice for industrial applications. The PTP 100 series, on the other hand, operates effectively in point-to-point scenarios with lower bandwidth requirements, ensuring cost-effective solutions for dedicated leased line services.

In summary, the Motorola PMP and PTP series represent a comprehensive suite of wireless communication solutions, utilizing advanced modulation technologies like OFDM and FSK to deliver high-speed, reliable connectivity. These products demonstrate Motorola's commitment to innovation, addressing the diverse needs of users ranging from ISPs to enterprise customers, all while ensuring robust performance and ease of deployment in various environments.