Motorola PTP 100 (FSK), PMP 100 Regulatory and Legal Notices, Important Note on Modifications

Page 43

Release 11.0

Release Notes and User Guide Supplement

11 Regulatory and Legal Notices

11.1 IMPORTANT NOTE ON MODIFICATIONS

Intentional or unintentional changes or modifications to the equipment must not be made unless under the express consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment and will void the manufacturer’s warranty.

11.2NATIONAL AND REGIONAL REGULATORY NOTICES

11.2.1U.S. Federal Communication Commission (FCC) Notification

For 900MHz, 2.4, 5.2, 5.4, 5.7 and 5.8-GHz devices:

This device complies with Part 15 of the US FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the US FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference by one or more of the following measures:

Increase the separation between the affected equipment and the unit;

Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to;

Consult the dealer and/or experienced radio/TV technician for help.

FCC IDs and the specific configurations covered are listed in Table 15.

For 4.9-GHz devices:

The 4.9-GHz band is a licensed band allocated to public safety services. State and local government entities that provide public safety services are eligible to apply for 4.9 GHz licenses. For additional information, refer to FCC regulations.

Issue 1, March 2011

Page 43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Software Release Release Notes and User Guide Supplement Trademarks, Product Names, and Service Names Table of Contents Regulatory and Legal Notices List of TablesList of Figures Abbreviations IntroductionRelease 11.0 Overview Document Change HistoryTechnical Support Feedback on DocumentationP7/P8/P9/P10/P11 Hardware Series Latin and Central America PhoneCanada Asia and Pacific Europe, Middle East, and AfricaModulation PMP Radio Series PTP Radio Series Module Type ApplicabilityUpgrading to Release Obtaining Cnut Upgrade PackagesRelease 11.0 Features FeaturesSM Receive Target Level can now be Affected Details Regions Products Feature DescriptionSee for Radius Implementation Overview Radius for PMPRadius Functions Tested Radius Servers Configuring AP and SM for Radius SM AuthenticationDisabled Authentication Server BAMAPs Configuration Security tab SM Authentication Mode Require Radius or Follow APSM Phase 2 Inside Identity parameters and settings SM Phase 1 Outside Identity parameters and settingsCertificate management on SMs Handling CertificatesUsing Cnut to distribute certificates to SMs Configuring Your Radius Server for SM AuthenticationName Number Type Configuring Your Radius Server for SM ConfigurationValue SM GUI Page Tab Parameter Default Size Canopy Radius Vendor Specific Attributes VSAsMotorola-Canopy-VLLEARNNEN Motorola-Canopy-ULBLMotorola-Canopy-DLBR Motorola-Canopy-DLBLAP Technician/Installer/Administrator Authentication APs Account User Authentication tab SM Technician/Installer/Administrator AuthenticationConfiguring a basic system Configuring Your Radius Server for Device Access TrackingProcedures Access TrackingPage Improvements and issues resolved in Release Resolved IssuesProducts Issue Discussion Affected Release 11.0 known open issues Known Open IssuesProducts Description Discussion and Recommendations Affected BAM 169.254/16 SM IP address space to access DNS services Test with MIR Region Code asPMP AP and PTP BH Region Code Set to United States US Region Code OperationOfdm GHz Ofdm PMP & PTP U.S. Region Code operationGHz FSK PMP & PTP U.S. Region Code operation PMP 430 Center ChannelsPMP 430 center channels by channel bandwidth and region code PMP 100 AP/SM DFS operation based on region code PMP 100 Series DFS Operation Based on Region CodeGHz Region Code PTP 100 backhaul operation based on region code PTP 100 Series DFS Operation Based on Region CodeRegion GHz Code1 PMP 400/430 and PTP 200 DFS operation based on region code PMP 400/430 and PTP 200 DFS Operation Based on Region CodeRegion Code Frequency Radio Platform Canopy MIB Definitions Performance Benchmarking ProcessSystem Performance and System Constraints PMP 430 5.4 and 5.8-GHz Ofdm with 20MHz Channels PMP 430 5.4 and 5.8-GHz Ofdm with 10MHz ChannelsSmaller Packets Benchmark Definition Pps Important Note on Modifications Regulatory and Legal NoticesNational and Regional Regulatory Notices FCC ID ABZ89FC5804 Within MHz ISM band MHz channels Centered on Industry Canada IC Notification Release Release Notes and User Guide Supplement UK Notification European Union Notification for 5.7 and 5.8 GHz ProductEquipment Disposal EU Declaration of Conformity for RoHS Compliance11.2.11Norway Notification Belgium NotificationLuxembourg Notification 11.2.10Czech Republic Notification11.2.14Labeling and Disclosure Table for China 11.2.13Australia NotificationChina disclosure table Exposure separation distances RF Exposure Separation DistancesModule Type Separation Distance from Persons # S Calculated exposure distances and power compliance marginsSoftware License Terms and Conditions Legal NoticesRelease Release Notes and User Guide Supplement Limit of Liability Hardware Warranty in US

PTP 100 (FSK), PMP 400, PTP 200 (OFDM, PMP 100 specifications

Motorola has long been a key player in the wireless communications market, known for its innovative solutions that cater to various connectivity needs. Among its diverse product range, the Motorola PMP 100 and PTP 200 series stand out as robust solutions for both point-to-multipoint (PMP) and point-to-point (PTP) applications, utilizing advanced modulation technologies such as OFDM (Orthogonal Frequency-Division Multiplexing) and FSK (Frequency Shift Keying).

The Motorola PMP 100 series is designed for wireless broadband access, enabling operators to provide high-speed internet connectivity to rural and underserved areas. Its capability to support multiple users makes it an ideal choice for ISPs looking to deliver last-mile connectivity. The PMP 100 operates in the 2.4 GHz and 5.7 GHz frequency bands, ensuring flexibility and compliance with various regulatory requirements. One of its key features is the use of OFDM technology, which enhances spectral efficiency and minimizes interference, resulting in reliable data transmission even in challenging environments.

On the other hand, the PTP 200 series focuses on point-to-point communication, offering high-capacity backhaul links between two locations. The PTP 200 is optimized for performance in line-of-sight scenarios, featuring advanced antenna options and narrow beam width capabilities. This product also leverages OFDM technology, which provides increased data rates and improved capacity, supporting applications such as video surveillance, voice over IP, and enterprise connectivity.

In addition to the PMP and PTP 200 series, Motorola also offers the PMP 400 and PTP 100, which utilize FSK modulation. The PMP 400 series further advances the capabilities of wireless broadband access, featuring enhanced error correction, allowing for better performance in adverse conditions. This series is particularly well-suited for environments with high noise levels, making it a reliable choice for industrial applications. The PTP 100 series, on the other hand, operates effectively in point-to-point scenarios with lower bandwidth requirements, ensuring cost-effective solutions for dedicated leased line services.

In summary, the Motorola PMP and PTP series represent a comprehensive suite of wireless communication solutions, utilizing advanced modulation technologies like OFDM and FSK to deliver high-speed, reliable connectivity. These products demonstrate Motorola's commitment to innovation, addressing the diverse needs of users ranging from ISPs to enterprise customers, all while ensuring robust performance and ease of deployment in various environments.
Top Page Image Contents