
Section 3 |
| Configuration |
|
|
|
Field or Button | Description | |
Network Name | Enter a name of no more than 32 alphanumeric characters. This | |
(SSID) | SSID must be entered on every wireless device on your wireless | |
| network to communicate with the router. The default SSID is | |
| motorola XXX, where XXX are the last 3 characters of your Wireless | |
| MAC address, found on the label on the bottom of the unit. | |
Channel | Identifies the channel on which the router communicates. Each | |
Number | wireless client must use the same channel to enable communication. | |
| If changed wirelessly, once you restart the router, you will lose your | |
| the wireless connection. Change the wireless device’s channel to the | |
| new channel to log back into the router. | |
| The default is Channel 11. |
Operation Mode
Performance Enhancement
WR850GP only
Enables you to select the type of transmission protocol your wireless network uses.
The options are:
Compatibility (802.11b/g) – default setting Performance (802.11g only)
Legacy (802.11b only)
When enabled, the wireless data throughput of a WR850GP router is boosted when used exclusively with Performance Enhanced client devices, such as the WN825GP Wireless Notebook Adapters and/or WPCI810GP Wireless PCI Adapters.
1From Operation Mode (see above), select Compatibility (802.11b/g) or Performance (802.11g only) to allow access to this feature.
2Check Performance Enhancement Enabled.
When the Performance Enhancement feature is enabled, the wireless network can still support
If you enable Performance Enhancement, it is recommended that you also enable Frame Bursting in the Wireless > Advanced screen. See Advanced Wireless Configuration for more information.
WR850 |