
Configuration | Section 3 |
|
|
Field
802.1X mode
Key Input
Method
Description
Can only be enabled when the ESS Authorization is set to Open or PSK and either WEP64 or WEP128 is selected (see the Encryption Status field). During the Authentication process, the server verifies the identity of the client attempting to connect to the network. When WPA or
If not already enabled, select to activate this feature. When enabled, Dynamic Key generation occurs, meaning a key is automatically generated when the client requests one.
Available if PSK and/or WEP is selected. The options are:
Pass Phrase (default setting) Hexadecimal
ASCII
| If you select either Pass Phrase or Hexadecimal, in Key Content, the |
| format of the Key appears in a hexadecimal format. |
| If you are using other |
| algorithm other than |
| manually in either ASCII or hexadecimal format for the |
| wireless products. |
Pass Phrase | Enter the Pass Phrase to be used for Key encryption. Keep a record of |
| this Pass Phrase so you can enter the same phrase for the Motorola |
| client devices on your wireless LAN, if supported. You will use this |
| Pass Phrase when using WPA security with your client devices. Pass |
| Phrase must be between 8 and 63 characters. |
| The default pass phrase is motorola. |
Key Length | The option selected determines the strength of the key. Only available |
| when ESS mode is set to PSK and the Encryption Status is set to |
| None. |
| There are two options: |
| |
|
WR850 |