Section 3 | Configuration |
|
|
Configuring Time Settings
The Time screen enables you to configure time settings.
To access the screen, click Control Panel > Time.
Field | Description |
Current Time | Displays the current time. |
Time Zone | Select your local time zone. The default is EST. |
Auto Daylight | If you want to automatically adjust for Daylight Savings Time, check to |
Adjust | enable this feature. The default is enabled. |
NTP Time | If you want to automatically check the current time, check to enable |
Synchronization | this feature. The default is enabled. |
NTP Server | Enter the current Network Time Protocol (NTP) servers from which |
1, 2, 3 | you can choose to synchronize your device. A listing of public NTP |
| servers, their access policies, and their Service Areas can be found |
| through the following URL: http://www.ntp.org. |
| To change, enter the host name or IP address for a desired Time |
| Server. |
Apply | Click to save your settings. |
Cancel | Click to cancel any changes. |
WR850 |