ViewSonic WR100 manual Advanced Web Management Settings

Chapter 4 Advanced Web Management Settings

Security (Firewall)

Wireless router Password: Change the password for the Wireless router by typing the password in the Enter New Password field. Then, type it again into the Re-enterfield to confirm. Click the Apply button to save the setting.

Use the default password (“admin”) when you first open the configuration pages. After you have configured these settings, set a new password for the Wireless router (using the Security screen). This increases security by protecting the Wireless router from unauthorized changes.

VPN Pass-Through:Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels, the Wireless router supports IPSec Pass-Through, L2TP Pass-Through, and PPTP Pass-Through.

•IPSec - Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec tunnels to pass through the Wireless router, IPSec Pass-Through is enabled by default. To disable IPSec Pass-Through, uncheck the box next to IPSec.

•L2TP - Layer 2 Tunneling Protocol is a protocol used to tunnel Point-to-Point Protocol (PPP) over the Internet. To allow L2TP

ViewSonic Wireless Media Adapter 24