DVD Audio Full Range
This sets the analog bass management selection for the 7.1 audio
When DVD AUDIO FULLRANGE shows NO, fil- ters will be set according to the settings in the QUICK SETUP SPEAKER SIZE menu.
1.From MAIN MENU press selection 9.
2.Press SELECT to toggle between the NO (bass filters) or YES (no filters) setting.
3.Press EXIT to get back to the MAIN MENU.
The Analog bass filters are fixed at an 80Hz setting.
1 | QUICK SETUP | SPEAKER SIZE |
2 | QUICK SETUP | SPEAKER DIST |
3 | INPUT ASSIGNMENT |
|
4 | TUNER/PAL/NTSC SETTING | |
5 | BASS TRIM |
|
6 | CALIBRATION |
|
7 | COMPRESSION | OFF |
8 | STATUS DISPLAY | ON |
9 | DVD AUDIO FULLRANGE | NO |
0 | RESET TO DEFAULTS | NO |
EXIT
Reset to Defaults
This will set the unit to all factory defaults, we recommend not to use this unless there is trouble with any of the settings you have made.
This is a good way to get the unit to baseline condition or when there has been an update to the unit firmware.
1.From MAIN MENU press selection 0.
2.Press SELECT to toggle between YES to reset or NO to not reset.
3.Press EXIT.
1 | QUICK SETUP | SPEAKER SIZE |
2 | QUICK SETUP | SPEAKER DIST |
3 | INPUT ASSIGNMENT |
|
4 | TUNER/PAL/NTSC SETTING | |
5 | BASS TRIM |
|
6 | CALIBRATION |
|
7 | COMPRESSION | OFF |
8 | STATUS DISPLAY | ON |
9 | DVD AUDIO FULLRANGE | NO |
0 | RESET TO DEFAULTS | NO |
EXIT
© 2002/2003 bel canto design, Ltd. | Page 12 | PRePro User’s Guide rev1103 |