To Change Input Assignment
a)Press the number of the input to be changed from the DEFAULT settings, assignment will blink.
b)To change a digital input assignment from the current DIG # or ANALOG setting, press SELECT button repeatedly until input assign- ment scrolls to DIG3 or any desired input.
c)Press EXIT to store settings and return to the main menu.
To Change Input Assignment Name
i)Press guide on the remote control, the rename screen will come up. At the top the default name for that input will be displayed, then the current name and XXXXX for the new name.
ii)Use the curser arrows on the remote to move up, down, right, left. When you have high- lighted the desired letter, blank or numbers, press select. Repeat this procedure until you the new name is created. Use “blank” to erase unused spaces.
iii)Press 1 to save name.
INPUT AUDIO |
| |
1 | VCR 1 | DIG 8 |
2 | VCR 2 | DIG 7 |
3 | TV | DIG 6 |
4 | LD | DIG 5 |
5 | AUX | DIG 4 |
6 | SAT | DIG 3 |
7 | DVD | DIG 2 |
8 | CD | DIG 1 |
9 | TAPE | ANALOG |
EXIT
DEFAULT NAME- SAT CURRENT
NEW NAME- XXXXX
ABCDEFGHIJKLMN OPQRSTUVWXYZ01 23456789 _
1.CHANGE NAME
2.KEEP CURRENT NAME
3.USE DEFAULT NAME EXIT
© 2002/2003 bel canto design, Ltd. | Page 18 | PRePro User’s Guide rev1103 |