Bel Canto Design PReProTM warranty Remote Control Learning Mode, Learning a New Command, Step

Page 27

Remote Control Learning Mode

This remote control allows you to transfer a command from a button on your source remote control (original equipment remote control) to a button on the Stargate remote control. New commands can be taught to any button in the CD, DVD, AUX, SAT, TV, VCR and CBL device modes, except on the LIGHT button.

The remote control provides distinct visual feedback with LEDs (Light Emitting Diodes) that are located at the top left of the remote control (Status LED) and under the Device buttons. The Status LED at the top left of the remote operates in three colors (red, orange and green). The Device buttons have a red color LED behind them. These LEDs will assist you in programming in the learning section of the remote control.

Learning a New Command

Select a Device mode in which you would like to teach the new command. For exam- ple, if you wanted to learn a new command to the PREV CH button in the TV mode on the remote, you would select the TV Device button and use the instructions below to teach the new command to the PREV CH button.

Step 1.

Press the Device button and the SELECT but- ton simultaneously and hold until the orange Status LED and the Device button turn on and remain lit.

Step 2.

On the remote control, press the button that

is to be taught the new command. The orange Status LED will begin to flash contin- uously. The Device LED will turn off.

Step 3.

On the source remote control (original remote control), press and hold the button for the command to be learned until the Status LED on the remote turns green. Release the button on the source remote con- trol.

Step 4.

Press the button on the source remote con- trol, once again to verify that the new com- mand has been learned correctly. The Status LED will flash green twice and then turn to a steady orange color indicating that the pro- gramming was successful. The Device LED will turn on.

Repeat Steps 2 through 4 for any other but- tons to be taught in the Device mode select- ed in Step 1.

Step 5.

Once you have completed learning new commands to the buttons in the selected Device mode you must save the pro- grammed information. Press and hold the Device button and SELECT button simultane- ously and hold until the orange Status LED flashes twice. The Device button will turn off.

Repeat the above for any other Device modes starting from Step 1.

© 2002/2003 bel canto design, Ltd.

Page 27

PRePro User’s Guide rev1103

Page 26 Page 28
Image 27
Page 26 Page 28
Contents PRePro Users Guide and Warranty InformationUnpacking General PrecautionsProduct Warranty Information CongratulationsRecommendations Placement GuidelinesAC Connecti AC Connection and Power Quick SetupSpeaker Size Quick Setup Speaker SizeSpeaker Distance Loudspeaker Setup Loudspeaker Size and Subwoofer Setup Input Audio Assignment Tuner SettingsBass Trim Press Exit to get back to the Main Menu CalibrationStatus Display CompressionDVD Audio Full Range Reset to DefaultsAdvanced Setup/Input Name Change Advanced SetupHardware Setup Video Monitor Connection Multi-Channel Output Connection Digital Source Set-up & Connection To Change Input Assignment Name To Change Input AssignmentAnalog Source Set-up & Connection To Change Input Assignment To Analog Zone 2 Trigger Setting up ZoneGeneral Operation of Unit This button toggles Mutes on and off This button toggles TFT display on and off Rear Panel Connections AC Power Fuse HolderControls and Functions Remote ControlRemote Control Learning Mode Learning a New CommandStep Erasing a Learned Command From a Button Step Erasing All the Learned Commands in One Device Mode StepErasing All of the Learned Commands in All Device Modes Programming a Macro Sequence Volume Punch ThroughExample for Programming a Macro Sequence Listening Modes Listening Mode DefinitionsPRePro User’s Guide rev1103 Trouble Shooting the Basics Troubleshooting GuideAUDIO/VIDEO Section Specifications

PReProTM specifications

Bel Canto Design PReProTM is a distinguished preamplifier that has garnered attention for its innovative features and exceptional sound quality. This high-performance audio component stands as a testament to Bel Canto's commitment to enhancing the listening experience through expert engineering and design.

One of the defining characteristics of the PReProTM is its cutting-edge digital processing capabilities. It employs advanced digital signal processing (DSP) technology that allows for precise control over the audio signal. This processing enables the PReProTM to deliver crystal-clear sound reproduction across a wide frequency range while minimizing distortion. The integration of DSP not only enhances playback quality but also provides users with customizable options for tailoring their audio experience.

Connectivity is another standout feature of the PReProTM. It offers a comprehensive array of inputs, including a selection of digital inputs such as USB, coaxial, and optical, facilitating seamless integration with various audio sources. Additionally, the preamplifier includes multiple analog inputs, making it versatile enough to accommodate both modern digital devices and traditional analog components. This flexibility ensures that users can connect all their audio equipment with ease.

The PReProTM is designed with an emphasis on user-friendly operation. It features an intuitive interface, allowing users to navigate settings and modes effortlessly. The clear display provides vital information about the selected input, volume levels, and audio processing settings, ensuring that the user remains informed and in control of their listening experience.

Moreover, the PReProTM boasts high-quality components, including meticulously selected capacitors, resistors, and a power supply designed to reduce noise and improve signal integrity. This attention to detail contributes to its ability to deliver a rich, immersive soundstage, allowing listeners to experience music as it was intended by the artists.

Another notable attribute of the PReProTM is its robust build quality. Constructed with a combination of durable materials and sophisticated engineering, the preamplifier is not only reliable but also designed to minimize resonance and interference. This design principle helps maintain the integrity of the audio signal, resulting in a more accurate and enjoyable listening experience.

In conclusion, the Bel Canto Design PReProTM is an exceptional preamplifier that brings together advanced technologies, versatile connectivity options, user-friendly operation, high-quality components, and a robust build. These features make it a prime choice for audiophiles and casual listeners alike, enhancing the enjoyment of music and audio in any setting. Whether integrating with a sophisticated home audio system or serving as the centerpiece of a high-end setup, the PReProTM delivers performance that elevates the listening experience to new heights.
Top Page Image Contents