ViewSonic PJD7382, PJD7400W warranty Optimizing the image, Selecting a picture mode

Page 36

Optimizing the image

Selecting a picture mode

The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type.

To select an operation mode that suits your need, you can follow one of the following steps.

•Press MODE/ENTER on the projector or Color Mode on the remote control repeatedly until your desired mode is selected.

•Go to the PICTURE > Color Mode menu and press / to select a desired mode.

Picture modes for different types of signals

The picture modes available for different types of signals are listed below.

PC input signals: D-Sub / Comp. 1/2 (analog RGB)

PJD7382

PJD7400/PJD7400w

1.Brightest mode: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms.

2.PC mode: Is designed for presentations under daylight environment to match PC and notebook coloring.

3.ViewMatch mode: Switches between high brightness performance and accurate color performance.

4.Cinema mode: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment.

5.User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See "Setting the User 1/User 2 mode" on page 33 for details.

Video input signals: S-Video, Video, D-Sub / Comp. 1/2 (YPbPr)

1.Brightest mode: Optimized for daylight viewing, with living room level ambient brightness.

2.Gaming mode: Suitable for all types of entertainment media, including gaming and movies.

3.ViewMatch mode: Switches between high brightness performance and accurate color performance.

4.Cinema mode: Is suitable for enjoying dark movies or DVD movies best viewed in a blackened (little light) home cinema or lounge room environment.

5.User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See "Setting the User 1/User 2 mode" on page 33 for details.

31

Page 35 Page 37
Image 36
Page 35 Page 37
Contents User Guide Compliance Information Important Safety Instructions Declaration of RoHS Compliance Copyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionShipping contents Projector exterior view Front/upper sideRear/lower side Controls and functions ProjectorRemote control Using the remote mouse control Operating the Laser pointerRemote control effective range Replacing the remote control batteriesPositioning your projector Choosing a locationProjection dimensions PJD7382/PJD7400PJD7400 PJD7400w Connection VGA DVIConnecting a computer or monitor Connecting a computerConnecting a monitor To connect the projector to a notebook or desktop computerConnecting Video source devices Best video qualityBetter video quality Least video qualityConnecting a Component Video source device Connecting an S-Video source deviceTo connect the projector to a Component Video source device To connect the projector to an S-Video source deviceConnecting a composite Video source device Playing sound through the projectorTo connect the projector to a composite Video source device About the microphone inputSignal Parameter Min Type Max Operation Starting up the projectorSee Timing chart on page 64 for details Using the menus System Setup BasicSystem Setup Advanced Utilizing the password function Setting a passwordIf you forget the password Entering the password recall procedure Changing the passwordDisabling the password function Switching input signal Adjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image clarity Correcting keystoneMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Selecting a picture mode Picture modes for different types of signalsPC input signals D-Sub / Comp /2 analog RGB Video input signals S-Video, Video, D-Sub / Comp /2 YPbPrUsing Screen Color Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Adjusting BrightnessAdjusting Color Adjusting TintAdjusting Sharpness Adjusting Brilliant ColorTo adjust the settings Color ManagementSetting the presentation timer To cancel the timer, perform the following stepsHiding the image Locking control keysTo activate the High Altitude Mode Freezing the imageOperating in a high altitude environment Creating your own startup screen Configuring the LAN Control Settings Controlling the projector through a LAN environmentIf you are in a Dhcp environment If you are in a non-DHCP environmentControlling the projector through a web browser e-Con- trol Category Item Input Length Maximum Number Characters Press Exit to go back to the remote network operation Using the projector in standby mode Power SavingMicrophone Active VGA OutShutting down the projector Menu operation Menu systemPicture Contrast System Setup Basic Advanced DCRDescription of each menu Color Mode TemperatureSettings ReferenceAuto Power Blank TimerLanguage ProjectorAudio MenuClosed CaptionTimer Reset AllLamp PresentationMaintenance Care of the projectorSetting Lamp Mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Indicators Light Status & DescriptionTroubleshooting Cause RemedySpecifications Projector specificationsDimensions Ceiling mount installationTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsCopyright information CopyrightDisclaimer RS232 command table AppendixIR control table Pin assignment for this two endInterface OFF 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x07 Svideo Write Reset Lamp Customer Support Limited Warranty Effect of state law Sales outside the U.S.A. and Canada Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México

PJD7400, PJD7400W, PJD7382 specifications

The ViewSonic PJD7400, PJD7400W, and PJD7382 projectors are designed to meet the diverse needs of both educational and professional environments, delivering exceptional performance and versatility. These projectors offer advanced features that enhance the viewing experience while ensuring robust connectivity and usability.

Starting with the PJD7400, this model boasts a bright 3200 lumens output, which ensures vibrant images even in well-lit environments. It has a high resolution of 1024x768 (XGA), making it suitable for displaying presentations, videos, and images with clarity. One of its standout features is the SuperColor technology, which provides a wide color gamut for accurate color reproduction. Additionally, the PJD7400 comes equipped with a 1.96-2.16 throw ratio, allowing for flexible installation options depending on room size.

The PJD7400W takes things a step further by offering a higher resolution of 1280x800 (WXGA). This model is perfect for widescreen content, providing enhanced detail and quality. With its 3200 lumens brightness, the PJD7400W can handle various lighting conditions, making it an excellent choice for classrooms and conference rooms. Like the PJD7400, it also features SuperColor technology, ensuring lifelike colors that captivate audiences. The PJD7400W has a low throw ratio and vertical keystone correction, which simplifies setup and alignment.

The PJD7382 serves as a more premium option within this lineup, featuring full 1080p resolution (1920x1080) for superior image quality. With a brightness level of 3500 lumens, it stands out as the brightest among the trio, ensuring clear visuals even in bright conditions. This model also incorporates advanced connectivity options, including HDMI, VGA, and USB ports, allowing for easy integration with a range of devices. The PJD7382 includes a 1.1x optical zoom lens, giving users further flexibility in adjusting image size without moving the projector.

Overall, the ViewSonic PJD7400, PJD7400W, and PJD7382 projectors provide exceptional performance features, making them ideal for a variety of settings. Their brightness, resolution capabilities, and advanced technologies like SuperColor ensure that users can expect high-quality presentations and images. Whether for educational purposes, business meetings, or home entertainment, these projectors deliver reliable, versatile solutions.
Top Page Image Contents