ViewSonic PJD7382, PJD7400W warranty Safety instructions for ceiling mounting of the projector

Page 8

13.Do not block the ventilation holes. If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire.

-Do not place this projector on a blanket, bedding or any other soft surface.

-Do not cover this projector with a cloth or any other item.

-Do not place inflammables near the projector.

14.Always place the projector on a level, horizontal surface during operation.

-Do not use if tilted at an angle of more than 10 degrees left to right, nor at angle of more than 15 degrees front to back. Using the projector when it is not fully horizontal may cause a malfunction of, or damage to, the lamp.

15.Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector.

16.Do not step on the projector or place any objects upon it. Besides probable physical damage to the projector, doing so may result in accidents and possible injury.

17.Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's wall socket and call your local service center to have the projector serviced.

18.This product is capable of displaying inverted pictures for ceiling mount installation.

Use only qualified ceiling mount kit for mounting the projector and ensure it is securely installed.

19.When the projector is under operation, you may sense some heated air and odor from its ventilation grill. It is a normal phenomenon and not a product defect.

20.Do not use the Security bar for transporting or installation. It should be used with a commercially available theft prevention cable.

Safety instructions for ceiling mounting of the projector

We want you to have a pleasant experience using your projector, so we need to bring this safety matter to your attention to prevent damage to person and property.

If you intend to mount your projector on the ceiling, we strongly recommend that you use a proper fitting projector ceiling mount kit and that you ensure it is securely and safely installed.

If you use an inappropriate projector ceiling mount kit, there is a safety risk that the projector may fall from the ceiling due to an improper attachment through the use of the wrong gauge or length screws.

You can purchase a projector ceiling mount kit from the place you purchased your projector. We recommends that you also purchase a separate Kensington lock compatible security cable and attach it securely to both the Kensington lock slot on the projector and the base of the ceiling mount bracket. This will perform the secondary role of restraining the projector should its attachment to the mounting bracket become loose.

3

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User Guide Compliance Information Important Safety Instructions Declaration of RoHS Compliance Copyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionShipping contents Rear/lower side Projector exterior viewFront/upper side Controls and functions ProjectorRemote control Using the remote mouse control Operating the Laser pointerRemote control effective range Replacing the remote control batteriesPositioning your projector Choosing a locationProjection dimensions PJD7382/PJD7400PJD7400 PJD7400w Connection VGA DVIConnecting a computer or monitor Connecting a computerConnecting a monitor To connect the projector to a notebook or desktop computerConnecting Video source devices Best video qualityBetter video quality Least video qualityConnecting a Component Video source device Connecting an S-Video source deviceTo connect the projector to a Component Video source device To connect the projector to an S-Video source deviceConnecting a composite Video source device Playing sound through the projectorTo connect the projector to a composite Video source device About the microphone inputSignal Parameter Min Type Max Operation Starting up the projectorSee Timing chart on page 64 for details System Setup Advanced Using the menusSystem Setup Basic If you forget the password Utilizing the password functionSetting a password Disabling the password function Entering the password recall procedureChanging the password Switching input signal Auto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image clarity Correcting keystoneMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Selecting a picture mode Picture modes for different types of signalsPC input signals D-Sub / Comp /2 analog RGB Video input signals S-Video, Video, D-Sub / Comp /2 YPbPrUsing Screen Color Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Adjusting BrightnessAdjusting Color Adjusting TintAdjusting Sharpness Adjusting Brilliant ColorTo adjust the settings Color ManagementSetting the presentation timer To cancel the timer, perform the following stepsHiding the image Locking control keysOperating in a high altitude environment To activate the High Altitude ModeFreezing the image Creating your own startup screen Configuring the LAN Control Settings Controlling the projector through a LAN environmentIf you are in a Dhcp environment If you are in a non-DHCP environmentControlling the projector through a web browser e-Con- trol Category Item Input Length Maximum Number Characters Press Exit to go back to the remote network operation Using the projector in standby mode Power SavingMicrophone Active VGA OutShutting down the projector Picture Contrast Menu operationMenu system System Setup Basic Advanced DCRDescription of each menu Color Mode TemperatureSettings ReferenceAuto Power Blank TimerLanguage ProjectorAudio MenuClosed CaptionTimer Reset AllLamp PresentationMaintenance Care of the projectorSetting Lamp Mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Indicators Light Status & DescriptionTroubleshooting Cause RemedySpecifications Projector specificationsDimensions Ceiling mount installationTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsDisclaimer Copyright informationCopyright RS232 command table AppendixIR control table Pin assignment for this two endInterface OFF 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x07 Svideo Write Reset Lamp Customer Support Limited Warranty Effect of state law Sales outside the U.S.A. and Canada Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México

PJD7400, PJD7400W, PJD7382 specifications

The ViewSonic PJD7400, PJD7400W, and PJD7382 projectors are designed to meet the diverse needs of both educational and professional environments, delivering exceptional performance and versatility. These projectors offer advanced features that enhance the viewing experience while ensuring robust connectivity and usability.

Starting with the PJD7400, this model boasts a bright 3200 lumens output, which ensures vibrant images even in well-lit environments. It has a high resolution of 1024x768 (XGA), making it suitable for displaying presentations, videos, and images with clarity. One of its standout features is the SuperColor technology, which provides a wide color gamut for accurate color reproduction. Additionally, the PJD7400 comes equipped with a 1.96-2.16 throw ratio, allowing for flexible installation options depending on room size.

The PJD7400W takes things a step further by offering a higher resolution of 1280x800 (WXGA). This model is perfect for widescreen content, providing enhanced detail and quality. With its 3200 lumens brightness, the PJD7400W can handle various lighting conditions, making it an excellent choice for classrooms and conference rooms. Like the PJD7400, it also features SuperColor technology, ensuring lifelike colors that captivate audiences. The PJD7400W has a low throw ratio and vertical keystone correction, which simplifies setup and alignment.

The PJD7382 serves as a more premium option within this lineup, featuring full 1080p resolution (1920x1080) for superior image quality. With a brightness level of 3500 lumens, it stands out as the brightest among the trio, ensuring clear visuals even in bright conditions. This model also incorporates advanced connectivity options, including HDMI, VGA, and USB ports, allowing for easy integration with a range of devices. The PJD7382 includes a 1.1x optical zoom lens, giving users further flexibility in adjusting image size without moving the projector.

Overall, the ViewSonic PJD7400, PJD7400W, and PJD7382 projectors provide exceptional performance features, making them ideal for a variety of settings. Their brightness, resolution capabilities, and advanced technologies like SuperColor ensure that users can expect high-quality presentations and images. Whether for educational purposes, business meetings, or home entertainment, these projectors deliver reliable, versatile solutions.
Top Page Image Contents