ViewSonic PJD7400W, PJD7382 warranty Category Item Input Length Maximum Number Characters

Page 46

•The source list varies according to the connectors available on the projector.

•When you use the projector control panel or remote control to change the OSD menu settings, it may take a while for the web browser to synchronize these changes with the projector.

3.The tools page allows you to manage the projector, configure the LAN control settings and secure access of remote network operation on this projector.

i

ii

iv

iiiv

vi

i.This section is only used with the Crestron Control System. Please contact Creston or refer to its user manual for setup information.

ii.You can name the projector, keep track of its location and the person in charge of it.

iii.You can adjust the LAN Control Settings.

iv.Once set, access to the remote network operation on this projector has been password-protected.

v.Once set, access to the tools page has been password-protected.

• To prevent errors, only input the English alphabet and digits on the tools page.

•After making the adjustments, press the Send button and the data will be saved for the projector.

vi.Press Exit to go back to the remote network operation page.

Please pay attention to the limitation of input length (including space and other punctuation keys) in the list blow:

Category Item

Input Length

Maximum Number of

Characters

 

 

 

 

 

 

IP Address

15

Crestron Control

 

 

IP ID

2

 

 

 

 

Port

5

 

 

 

 

Projector Name

10

Projector

 

 

Location

9

 

 

 

 

Assigned To

9

41

Page 45 Page 47
Image 46
Page 45 Page 47
Contents User Guide Compliance Information Important Safety Instructions Declaration of RoHS Compliance Copyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionShipping contents Front/upper side Projector exterior viewRear/lower side Controls and functions ProjectorRemote control Using the remote mouse control Operating the Laser pointerRemote control effective range Replacing the remote control batteriesPositioning your projector Choosing a locationProjection dimensions PJD7382/PJD7400PJD7400 PJD7400w Connection VGA DVIConnecting a monitor Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerBetter video quality Connecting Video source devicesBest video quality Least video qualityTo connect the projector to a Component Video source device Connecting a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceTo connect the projector to a composite Video source device Connecting a composite Video source devicePlaying sound through the projector About the microphone inputSignal Parameter Min Type Max Operation Starting up the projectorSee Timing chart on page 64 for details System Setup Basic Using the menusSystem Setup Advanced Setting a password Utilizing the password functionIf you forget the password Changing the password Entering the password recall procedureDisabling the password function Switching input signal Adjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image clarity Correcting keystoneMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio PC input signals D-Sub / Comp /2 analog RGB Selecting a picture modePicture modes for different types of signals Video input signals S-Video, Video, D-Sub / Comp /2 YPbPrSetting the User 1/User 2 mode Using Screen ColorFine-tuning the image quality in user modes Adjusting BrightnessAdjusting Sharpness Adjusting ColorAdjusting Tint Adjusting Brilliant ColorTo adjust the settings Color ManagementSetting the presentation timer To cancel the timer, perform the following stepsHiding the image Locking control keysFreezing the image To activate the High Altitude ModeOperating in a high altitude environment Creating your own startup screen If you are in a Dhcp environment Configuring the LAN Control SettingsControlling the projector through a LAN environment If you are in a non-DHCP environmentControlling the projector through a web browser e-Con- trol Category Item Input Length Maximum Number Characters Press Exit to go back to the remote network operation Microphone Using the projector in standby modePower Saving Active VGA OutShutting down the projector Menu system Menu operationPicture Contrast System Setup Basic Advanced DCRDescription of each menu Settings Color ModeTemperature ReferenceLanguage Auto PowerBlank Timer ProjectorClosed AudioMenu CaptionLamp TimerReset All PresentationMaintenance Care of the projectorLamp information Setting Lamp Mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Indicators Light Status & DescriptionTroubleshooting Cause RemedySpecifications Projector specificationsDimensions Ceiling mount installationTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsCopyright Copyright informationDisclaimer IR control table RS232 command tableAppendix Pin assignment for this two endInterface OFF 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x07 Svideo Write Reset Lamp Customer Support Limited Warranty Effect of state law Sales outside the U.S.A. and Canada Mexico Limited Warranty Número Gratis DE Asistencia Técnica Para Todo México

PJD7400, PJD7400W, PJD7382 specifications

The ViewSonic PJD7400, PJD7400W, and PJD7382 projectors are designed to meet the diverse needs of both educational and professional environments, delivering exceptional performance and versatility. These projectors offer advanced features that enhance the viewing experience while ensuring robust connectivity and usability.

Starting with the PJD7400, this model boasts a bright 3200 lumens output, which ensures vibrant images even in well-lit environments. It has a high resolution of 1024x768 (XGA), making it suitable for displaying presentations, videos, and images with clarity. One of its standout features is the SuperColor technology, which provides a wide color gamut for accurate color reproduction. Additionally, the PJD7400 comes equipped with a 1.96-2.16 throw ratio, allowing for flexible installation options depending on room size.

The PJD7400W takes things a step further by offering a higher resolution of 1280x800 (WXGA). This model is perfect for widescreen content, providing enhanced detail and quality. With its 3200 lumens brightness, the PJD7400W can handle various lighting conditions, making it an excellent choice for classrooms and conference rooms. Like the PJD7400, it also features SuperColor technology, ensuring lifelike colors that captivate audiences. The PJD7400W has a low throw ratio and vertical keystone correction, which simplifies setup and alignment.

The PJD7382 serves as a more premium option within this lineup, featuring full 1080p resolution (1920x1080) for superior image quality. With a brightness level of 3500 lumens, it stands out as the brightest among the trio, ensuring clear visuals even in bright conditions. This model also incorporates advanced connectivity options, including HDMI, VGA, and USB ports, allowing for easy integration with a range of devices. The PJD7382 includes a 1.1x optical zoom lens, giving users further flexibility in adjusting image size without moving the projector.

Overall, the ViewSonic PJD7400, PJD7400W, and PJD7382 projectors provide exceptional performance features, making them ideal for a variety of settings. Their brightness, resolution capabilities, and advanced technologies like SuperColor ensure that users can expect high-quality presentations and images. Whether for educational purposes, business meetings, or home entertainment, these projectors deliver reliable, versatile solutions.
Top Page Image Contents