ViewSonic PJD5533W, PJD5134 warranty Declaration of RoHS2 Compliance

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/ EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Commit- tee (TAC) as shown below:

Substance	Proposed Maximum	Actual Concentration
	Concentration
Lead (Pb)	0.1%	< 0.1%
Mercury (Hg)	0.1%	< 0.1%
Cadmium (Cd)	0.01%	< 0.01%
Hexavalent Chromium (Cr6+)	0.1%	< 0.1%
Polybrominated biphenyls (PBB)	0.1%	< 0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%	< 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below:

Examples of exempted components are:

1.Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps

(CCFL and EEFL) for special purposes not exceeding (per lamp):

(1)Short length (≦500 mm): maximum 3.5 mg per lamp.

(2)Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.

(3)Long length (＞1,500 mm): maximum 13 mg per lamp.

2.Lead in glass of cathode ray tubes.

3.Lead in glass of fluorescent tubes not exceeding 0.2% by weight.

4.Lead as an alloying element in aluminium containing up to 0.4% lead by weight.

5.Copper alloy containing up to 4% lead by weight.

6.Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

7.Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

iii